Skip to the content
2 layersSwitch Mode Power Supply, the printed circuit board in 3D

Switch Mode Power Supply

shmmolo/PCB-Switch_Mode_Power_Supply

This project is a Switch-Mode Power Supply (SMPS) in flyback configuration, delivering 25 W output power at 9 V DC. It features USB Power Delivery (PD) communication for fast charging via a USB Type-C port and uses the UCC28750 flyback controller for high-efficiency operation with isolated feedback.

Copper layers
2
Thickness
1.6 mm
Parts
43
Nets
46
Pads
147
Tracks, vias
120, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
29 Oct 2025
Updated
29 Oct 2025

Overview

Switch Mode Power Supply is an open-source printed circuit board by shmmolo, from the shmmolo/PCB-Switch_Mode_Power_Supply repository on GitHub. It is a 2-layer board with 43 parts on 46 nets, routed with 120 tracks and 0 vias.

It is built around the IP2721, SS310 and GBU4K. Its parts include 15 capacitors, 14 resistors, 5 diodes, 4 ICs and 2 transistors. It belongs with the power boards of this library.

Main components

3

README

README.md

25 W @ 9 V Flyback SMPS Charger with USB-PD

A compact isolated Flyback SMPS delivering 25 W power for USB-C PD fast charging, designed around TI’s UCC28750 controller.

Features

  • 220 VAC input → 9 V / 5 V output
  • USB-PD communication via IP2721
  • UCC28750 PWM controller + optocoupler feedback
  • Schottky rectification and snubber protection
  • 2-layer PCB with ground plane and isolation gap

Components

  • U1: UCC28750 Flyback Controller
  • Q1: NMOS primary switch
  • U2: PC817 Optocoupler
  • U3: TL431 Voltage Reference
  • U4: IP2721 USB-PD Controller
  • D1–D5: GBU4K + SS310 Schottky diodes
  • T1: Flyback Transformer (custom)
  • C1–C12: Filtering capacitors

Output Specs

ModeVoltageCurrentPower
Default5 V2.8 A14 W
USB-PD9 V2.8 A25 W

Notes

PCB under layout stage – final design will feature 2-layer structure with dedicated GND plane, thermal reliefs, and isolation.

Parts

43
QtyValueFootprintReferences
310uCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC1, C2, C3
3576kResistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolderR1, R2, R3
3820uCapacitor_SMD:CP_Elec_4x5.4C10, C11, C12
210uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC6, C14
2110kResistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolderR4, R5
21kResistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolderR9, R10
24.7nCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC9, C15
2NMOSPackage_TO_SOT_SMD:TO-252-3_TabPin2Q1, Q2
2SS310Diode_SMD:D_SMAD2, D3
10.68Resistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolderR8
110Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolderR13
110kResistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolderR12
11MResistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolderR14
11nCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC7
11uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC13
12.2nCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC4
122Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolderR6
122pCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC8
130.1kResistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolderR11
14.64kResistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolderR7
14.7uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC5
1Conn_01x02_SocketTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ1
1DDiode_SMD:D_SMAD4
1D_SchottkyDiode_SMD:D_SMB_HandsolderingD5
1GBU4KDiode_THT:Diode_Bridge_Vishay_GBUD1
1IP2721Package_SO:TSSOP-16_4.4x5mm_P0.65mmU4
1PC817Package_DIP:DIP-4_W7.62mmU2
1TL431DBZPackage_TO_SOT_SMD:SOT-23U3
1Transformer_2P_1STransformers_custom:B66417G0000X149T1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J2
1~Package_TO_SOT_SMD:SOT-23-6U1

Similar boards

  • 2 layers142 × 58 mmQLAMP main, the printed circuit board in 3D

    QLAMP main

    hisashin/qNinjaLite

    for LAMP

    143 parts24GPL-3.0
  • 2 layers100 × 100 mmHeatTable Base v0.9, the printed circuit board in 3D

    HeatTable Base v0.9

    DerSpatz/PCB-reflow-solder-table

    Table version of the PCB heat plate with advanced features and swappable heat plate

    82 parts14MIT
  • 2 layers83.3 × 56.5 mmPhone bell, the printed circuit board in 3D

    Phone bell

    purduehackers/phone-bell

    A Rotary Phone Doorbell

    53 parts4
  • 4 layers129 × 79.8 mmRc car, the printed circuit board in 3D

    Rc car

    alaotach/rc-car

    Quixie is a small autonomous RC delivery car. The custom PCB handles motor control and sensor expansion; the firmware manages navigation, telemetry, and the locking cargo bay.

    86 parts2
  • 2 layers100 × 100 mmIP2721-USB C breakout, the printed circuit board in 3D

    IP2721-USB C breakout

    louiscklaw/IP2721-USB-C-breakout

    IP2721-USB-C-breakout

    13 parts2
  • 4 layers104 × 102 mmPanelCopypaste, the printed circuit board in 3D

    PanelCopypaste

    Gangwa-Labs/Reflow.Card

    PCB Trace Reflow hotplate for the hackaday 2024 Business Card Challenge

    132 parts1Apache-2.0
  • 4 layers60.4 × 25.2 mmUSB C Power Delivery Conveter, the printed circuit board in 3D

    USB C Power Delivery Conveter

    Hirusha785/usb-c-pd-buck-converter

    🔌 A compact USB-C Power Delivery converter PCB that negotiates PD input and steps it down to a stable DC output. Includes schematic, PCB layout, and 3D render files. 🔋

    24 parts1
  • 2 layers100 × 100 mmRelow solder hot plate, the printed circuit board in 3D

    Relow solder hot plate

    ldab/reflow-solder-hot-plate

    USB-C powered, esp32s3 based, hot plate

    52 parts1WTFPL

Questions

What parts does the Switch Mode Power Supply use?

43 parts, built around the IP2721, SS310 and GBU4K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Switch Mode Power Supply KiCad files?

From the shmmolo/PCB-Switch_Mode_Power_Supply repository on GitHub, at the commit this page was made from: the board is Hardware/Switch-Mode Power Supply.kicad_pcb and its schematic Hardware/Switch-Mode Power Supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Switch Mode Power Supply design in my own project?

Its repository states no licence, so its author keeps all rights: ask shmmolo before reusing the design.