

QLAMP main
for LAMP
- Size
- 142 × 58 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 143
- Nets
- 158
- Pads
- 550
- Tracks, vias
- 2,657, 468
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Apr 2020
- Updated
- 27 Apr 2023
Overview
QLAMP main is an open-source printed circuit board by hisashin, from the hisashin/qNinjaLite repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 142 × 58 mm with 143 parts on 158 nets, routed with 2,657 tracks and 468 vias.
It is built around the ESP32-WROOM-32, ADA2200ARUZ and IP2721, with the TLC5929PWP, TPS63710DRRR and CD74HC4067M96 among its other parts. Its parts include 33 capacitors, 32 diodes, 23 resistors, 17 ICs and 16 connectors. It belongs with the ESP32 boards of this library.
Main components
10ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesADA2200ARUZ
TSSOP-16-40℃~+85℃ 2.7V~3.6V 485uA I2C、SPI Power-up/reset configuration、Non-volatile configuration storage TSSOP-16 Interface - Specialized ROHSAnalog DevicesInterface - SpecializedIP2721
TSSOP-16-40℃~+85℃ 1C 3V~25V 5V、15V、20V PD 2.0、PD 3.0 Power Receiver Controller TSSOP-16 USB PD ROHSINJOINICInterface - SpecializedTLC5929PWP
HTSSOP-24-EP-40℃~+85℃ 10V 16 3% 3V~5.5V 50mA Built-in Over-Temperature Protection (OTP) HTSSOP-24-EP LED Drivers ROHSTexas InstrumentsLED DriversTPS63710DRRR
TDFN-12-EP(3x3)-40℃~+125℃@(TJ) 1 1.5MHz 15mA 1A 1V~5.5V 3.1V~14V Adjustable Built-in Inverting Overcurrent Protection、Output discharge、Adjustable soft-start、Operating status indication、Built-in LDO regulator Step-down type Yes TDFN-12-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersCD74HC4067M96
SOIC-24-300mil-55℃~+125℃ 15ns 2V~6V 70Ω 83ns 83ns 89MHz SOIC-24-300mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersCJT1117-3.3
UncategorisedUnknown makerCJT1117-5.0
UncategorisedUnknown makerCOM1305-0.032768-EXT-T-TR
SMD3225-4PSMD3225-4P Crystal Oscillators ROHSRaltronCrystal OscillatorsSN74LV4051AD
SOIC-16-40℃~+85℃ 1 22Ω 2V~5.5V 35MHz 600ps 8:1 SOIC-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
README
README.mdOpen Source $50 qLAMP machine qNinja

$300 Real Time PCR and LAMP machine "qNinja" is also available

Reference Links
Parts
143| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | D_Photo | Diodes_SMD:D_1206 | D1A1, D1B1, D10A1, D10B1, D11A1, D11B1, D12A1, D12B1, D13A1, D13B1, D14A1, D14B1, D15A1, D15B1, D16A1, D16B1 +16 |
| 11 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C7, C8, C10, C11, C24, C27, C31, C32 |
| 7 | Jumper_3_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP4, JP5, JP6, JP7, JP8, JP9, JP10 |
| 6 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R16, R19, R21, R22, R23 |
| 6 | 22uF | Capacitor_SMD:C_1210_3225Metric | C12, C20, C21, C25, C28, C29 |
| 6 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | TAIR1, TEXT1, TEXT2, TEXT3, TLID1, TWELL1 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R14, R20 |
| 5 | Conn_01x02_Male | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J22, J24, J25, J26, J27 |
| 4 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C22, C33 |
| 4 | Conn_01x01_Male | Connector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_Vertical | J13, J16, J20, J23 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C14, C15, C16 |
| 3 | Q_NMOS_GSD | Ninja-qPCR:SOT95P240X112-3N | Q1, Q3, Q5 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C9, C19 |
| 2 | 150 | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | Conn_01x01_Male | Connector_PinSocket_1.27mm:PinSocket_1x01_P1.27mm_Vertical | J14, J15 |
| 2 | Conn_01x10_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | JLN1, JLS1 |
| 2 | Screw_Terminal_01x02 | Ninja-qPCR:TB_SeeedOPL_320110028 | HLID1, HWELL1 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C30 |
| 1 | 100uF | Ninja-qPCR:35TZV100M6.3X8 | C23 |
| 1 | 10M | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 10k_HP | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 10uF(<=20V) | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 1uF(<=20V) | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 2.2uH | Capacitor_SMD:C_0805_2012Metric | L1 |
| 1 | 330pF | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 39k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 47k_HP | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | ADA2200ARUZ | Ninja-qPCR:ADA2200ARUZ | U1 |
| 1 | ADS1219IPWR | Ninja-qPCR:ADS122C04IPWR | U2 |
| 1 | ALI_USB | Ninja-qPCR:ALI_USB | J1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | CD74HC4067M96 | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U19 |
| 1 | CJT1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U15 |
| 1 | CJT1117-5.0 | Package_TO_SOT_SMD:SOT-223 | U16 |
| 1 | COM1305-0.032768-EXT-T-TR | Ninja-qPCR:ASDK-32.768KHZ-LRT | U3 |
| 1 | Conn_01x05_Male | Connector_PinSocket_1.27mm:PinSocket_1x05_P1.27mm_Vertical | J21 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06_Male | Connector_PinSocket_1.27mm:PinSocket_1x06_P1.27mm_Vertical | J12 |
| 1 | DNP(<1pF) | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U5 |
| 1 | IP2721 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U11 |
| 1 | LITE_LCD | Ninja-qPCR:LITE_LCD | U17 |
| 1 | LMP7717MF_NOPB | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | MCP1755T-3302E_DC | Package_TO_SOT_SMD:SOT-223-6 | U13 |
| 1 | MCP1755T-3302E_OT | Package_TO_SOT_SMD:SOT-23-5 | U14 |
| 1 | SN74LV4051A | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U9 |
| 1 | SN74LVC1GU04DCKR | Ninja-qPCR:SN74LVC1GU04DBVR | U7 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | TLC5929 | Package_SO:HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x4.68mm_ThermalVias | U10 |
| 1 | TPS63710DRRR | Ninja-qPCR:TPS63710DRRR | U12 |
| 1 | TS12A12511DCNR | Package_TO_SOT_SMD:SOT-23-8 | U8 |
More from hisashin/qNinjaLite
10- 2 layers157 × 58 mm

- 2 layers142 × 58 mm

- 2 layers142 × 58 mm

- 2 layers181.5 × 58 mm

- 2 layers142 × 58 mm

- 2 layers84.5 × 30 mm

- 2 layers123.1 × 58 mm

- 2 layers39 × 28.5 mm

- 2 layers61.9 × 31.5 mm

- 2 layers84 × 36 mm

Similar boards
- 2 layers100 × 116 mm

- 2 layers100 × 116 mm

- 2 layers100 × 100 mm

- 4 layers63.4 × 50.8 mm

- 2 layers284.7 × 94.2 mm

- 2 layers301.8 × 97 mm

M256-WHE
peppapighs/M256-WHE
M256-WHE is a Hall-effect keyboard PCB, specifically designed for Mode Encore, Mode SixtyFive v2, and Mode Envoy [1].
318 parts4GPL-3.0 - 2 layers309.6 × 95 mm

HEball
gohanda11/HEball
A split keyboard powered by Hall Effect (magnetic) switches with a trackball on the right half.
213 parts2GPL-3.0 - 2 layers162.3 × 227.8 mm

Symm60HE wklbs2-Panel
Mokeded/Symm60HE
Symmetrical Hall effect Alice keyboard based off of the Doe
406 parts2GPL-3.0
Questions
How big is the QLAMP main PCB?
It measures 142 × 58 mm and has 2 copper layers, 1.6 mm thick.
What parts does the QLAMP main use?
143 parts, built around the ESP32-WROOM-32, ADA2200ARUZ, IP2721 and TLC5929PWP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the QLAMP main KiCad files?
From the hisashin/qNinjaLite repository on GitHub, at the commit this page was made from: the board is kicad/NinjaLite/batch01/main/qLAMP-main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the QLAMP main design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).