

GSM GPS HAT
- Size
- 37.6 × 34.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 117
- Pads
- 311
- Tracks, vias
- 541, 164
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Jul 2024
- Updated
- 14 Sep 2025
Overview
GSM GPS HAT is an open-source printed circuit board by shahariyar-maraz, from the shahariyar-maraz/PCB_Design repository on GitHub. It is a 4-layer board of 37.6 × 34.9 mm with 70 parts on 117 nets, routed with 541 tracks and 164 vias.
It is built around the ME6217C33P5G, RS0108YTQC20 and SNO-1430, with the ULC0511CDN, PESDHC3D3V3U and U.FL-R-SMT-1(10) among its other parts. Its parts include 23 capacitors, 16 resistors, 8 ICs, 8 diodes and 1 transistor. It belongs with the radio and wireless boards of this library.
Main components
9ME6217C33P5G
SOT-89-5-40℃~+85℃ 1 100mV@(300mA) 100uA 3.3V 6.5V 65dB@(1kHz) 800mA Fixed Over Current Protection、Thermal shutdown、Enable control Positive SOT-89-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRS0108YTQC20
QFN-20L(3x3)-40℃~+85℃ 1.65V~5.5V 2.3V~5.5V 24Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional I2C、Single bus Level translator Tri-State QFN-20L(3x3) Translators, Level Shifters ROHSJiangsu RUNIC TechTranslators, Level ShiftersSNO-1430
SMD-40℃~+85℃ 1.13mm Connector and Ejector Nano-SIM Card Push-Pull SMD SIM Card Connectors ROHSHanbo ElectronicSIM Card ConnectorsULC0511CDN
DFN1006-2-55℃~+125℃ 1 10V 1A@8/20us 200nA 3pF 5V 6V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 DFN1006-2 ESD and Surge Protection (TVS/ESD) ROHSShenzhen Jinkaisheng ElecESD And Surge Protection (TVS/ESD)PESDHC3D3V3U
SOD-32315A@8/20us 1uA 280W@8/20us 280pF 3.3V 5V 6.5V、7.4V、9V TVS Unidirectional SOD-323 ESD and Surge Protection (TVS/ESD) ROHSShanghai Prisemi ElecESD And Surge Protection (TVS/ESD)U.FL-R-SMT-1(10)
SMD-40℃~+90℃ 1 1.25mm 2mm 50Ω 6GHz Board Side IPEX Male Pin SMD Coaxial Connectors (RF) ROHSHirose ElectricCoaxial Connectors (RF)MMBT3904FA-7B
DFN-3L(0.6x0.8)-55℃~+150℃ 1 NPN 100 200mA 200mV 300MHz 40V 435mW 50nA 6V NPN DFN-3L(0.6x0.8) Bipolar (BJT) ROHSDiodes IncorporatedBipolar (BJT)SMF05C.TCT
SOT-363-6(SC-70)-55℃~+125℃ 100W 12.5V 130pF 5V 5uA 6V 8A@8/20us IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional SOT-363-6(SC-70) ESD and Surge Protection (TVS/ESD) ROHSSEMTECHESD And Surge Protection (TVS/ESD)TS-KG88C-ACT25F
SMD,4x2.9mm12V 2.5N 2.5mm 2.9mm 4mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x2.9mm Tactile Switches ROHSHanbo ElectronicTactile Switches
README
Kicad/GSM_Module/readme.mdParts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF/10V | easyeda2kicad:C0402 | C1, C2, C3, C4, C10, C13, C16, C19, C20, C21, C23 |
| 8 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 5 | 100nF/16V | easyeda2kicad:C0402 | C6, C7, C14, C17, C22 |
| 4 | 10R | easyeda2kicad:R0402 | R2, R6, R7, R14 |
| 3 | 10K | easyeda2kicad:R0402 | R1, R12, R13 |
| 3 | 22R | easyeda2kicad:R0402 | U2, U4, U5 |
| 3 | ULC0511CDN | easyeda2kicad:X1-DFN1006-2_L1.0-W0.6-RD | D1, D3, D4 |
| 2 | 0.1uF/100V | easyeda2kicad:C0603 | C8, C9 |
| 2 | 0R | easyeda2kicad:R0402 | R15, R16 |
| 2 | 100pF/50V | easyeda2kicad:C0402 | C15, C18 |
| 2 | 1K | easyeda2kicad:R0402 | R3, R4 |
| 2 | 220uF/6.3V | easyeda2kicad:CASE-B_3528 | C11, C12 |
| 2 | 390R | easyeda2kicad:R0402 | R5, R9 |
| 2 | PESDHC3D3V3U | easyeda2kicad:SOD-323_L1.8-W1.3-LS2.5-RD | D5, D6 |
| 2 | RED | easyeda2kicad:LED0603-R-RD_RED | LED1, LED2 |
| 2 | U.FL-R-SMT-1(10) | easyeda2kicad:ANT-SMD_UFL-R-SMT-1-10 | JP1, JP2 |
| 1 | 100R | easyeda2kicad:R0402 | R8 |
| 1 | 1050171001 | easyeda2kicad:MICRO-USB-SMD_1050171001 | USB1 |
| 1 | 1L/3P | easyeda2kicad:HDR-TH_3P-P2.54-V-M | U1 |
| 1 | 1L/7P | easyeda2kicad:HDR-TH_7P-P2.54-V-M | H1 |
| 1 | 2.2uF/25V | easyeda2kicad:C0402 | C5 |
| 1 | 4.7K | easyeda2kicad:R0402 | R10 |
| 1 | 47K | easyeda2kicad:R0402 | R11 |
| 1 | 47nH/1.2GHz | easyeda2kicad:IND-SMD_L1.6-W0.8-RD | L1 |
| 1 | ME6217C33P5G | easyeda2kicad:SOT-89-5_L4.5-W2.5-P1.50-LS4.5-BR | U8 |
| 1 | MMBT3904FA-7B | easyeda2kicad:DFN-3L_L0.8-W0.6-P0.35-BR | Q1 |
| 1 | RS0108YTQC20 | easyeda2kicad:QFN-20_L3.0-W3.0-P0.40-BL-EP1.7 | U3 |
| 1 | SMF05C.TCT | easyeda2kicad:SC-70-6_L2.2-W1.3-P0.65-LS2.1-BR | D2 |
| 1 | SNO-1430 | easyeda2kicad:SIM-SMD_HANBO_SNO-1430 | U6 |
| 1 | TS-KG88C-ACT25F | easyeda2kicad:KEY-SMD_L4.0-W2.9-LS4.8 | SW1 |
| 1 | ~ | easyeda2kicad:LGA-124_L24.0-W24.0-P1.0-A7670C-LASS | U7 |
Similar boards
- 2 layers110 × 70 mm

- 4 layers100 × 50 mm

Audio test board
Thecactusman0/ES8327-Breakout
Breakout/testing board for the ES8327 dual channel audio CODEC
152 parts2 - 2 layers206.3 × 91.3 mm

- 4 layers80.6 × 60.6 mm

Lorawan sensor node v2
ElektorLabs/lorawan-sensor-node-v2
Solar Powered LoRaWAN Sensor Node V2
84 parts1GPL-3.0 - 2 layers68.4 × 51.1 mm

- 2 layers52 × 29 mm

Cellular featherwing pcb
keenanjohnson/cellular-featherwing-pcb
The PCB Design for a Cellular Adafruit Featherwing based on the Quectel BG96 LTE Cat M1 & Cat NB1.
64 parts1 - 2 layers70.6 × 70.6 mm

- 2 layers42 × 59.5 mm

ESP32 adon
Stan-debakker/grap-6TWEA
Daarnaast moest ik ervoor zorgen dat de nieuwe sensoren correct werken. Ik ben gestart met experimenteren via Arduino IDE, zie "codearduinoIDE".
37 parts
Questions
How big is the GSM GPS HAT PCB?
It measures 37.6 × 34.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the GSM GPS HAT use?
70 parts, built around the ME6217C33P5G, RS0108YTQC20, SNO-1430 and ULC0511CDN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GSM GPS HAT KiCad files?
From the shahariyar-maraz/PCB_Design repository on GitHub, at the commit this page was made from: the board is Kicad/GSM_Module/GSM_GPS_HAT.kicad_pcb and its schematic Kicad/Boost_Converter_PCB_Design/Boost_Converter V1.0/Boost_Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GSM GPS HAT design in my own project?
Its repository states no licence, so its author keeps all rights: ask shahariyar-maraz before reusing the design.