

Project PCB
- Size
- 70.6 × 70.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 58
- Pads
- 179
- Tracks, vias
- 185, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Apr 2025
- Updated
- 20 May 2025
Overview
Project PCB is an open-source printed circuit board by hhh2004, from the hhh2004/DTAP2025_Team7_PCB repository on GitHub. It is a 2-layer board of 70.6 × 70.6 mm with 51 parts on 58 nets, routed with 185 tracks and 8 vias.
It is built around the ESP32-S3-WROOM-1-N8, LMV321 and MCP73831T-2ACI/OT-HXY, with the RT9080-33GJ5, B2100 and SMF05C.TCT among its other parts. Its parts include 15 resistors, 8 capacitors, 7 diodes, 4 ICs and 3 connectors. It belongs with the ESP32 boards of this library.
Main components
6ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLMV321
SOT-23-5L-2.75V~-1.25V、1.25V~2.75V 0℃~+70℃ 1 10pA 10pA 1MHz 2.1V~5.5V 20mA 20nV/√Hz@10kHz 520V/ms 60uA 70dB 800uV Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5L Operational Amplifier ROHSJiangsu Changjing Electronics Technology (CJ)Operational AmplifierMCP73831T-2ACI/OT-HXY
SOT-23-5LBattery ManagementHXY MOSFETRT9080-33GJ5
TSOT-23-5-40℃~+125℃@(Tj) 1 2uA 3.3V 360mV@(600mA) 42uVrms 5.5V 600mA 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsB2100
SMB(DO-214AA)100V 2A 790mV@2A 7uA@100V Independent SMB(DO-214AA) Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesSMF05C.TCT
SOT-363-6(SC-70)-55℃~+125℃ 100W 12.5V 130pF 5V 5uA 6V 8A@8/20us IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional SOT-363-6(SC-70) ESD and Surge Protection (TVS/ESD) ROHSSEMTECHESD And Surge Protection (TVS/ESD)
README
README.mdDTAP2025_Team7_PCB
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9, R11, R12 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5, C8 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R7, R10 |
| 2 | 1.0uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C6 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R16 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R17 |
| 2 | B2100 | Diode_SMD:D_SMB_Handsoldering | D4, D5 |
| 2 | LED_RKGB | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | D1, D2 |
| 1 | 10uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C7 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 2.2uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C4 |
| 1 | 22uF | Capacitor_THT:C_Radial_D6.3mm_H7.0mm_P2.50mm | C2 |
| 1 | 36k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 3V3_TEST | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW2 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J3 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | GND_TEST | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | Green | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | LMV321 | Package_TO_SOT_SMD:SOT-353_SC-70-5_Handsoldering | U4 |
| 1 | MCP73831T-2ACI/OT | MCP73831:SOT-23-5_MC_MCH | U3 |
| 1 | Myoware Connector | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | POWER | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW3 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW1 |
| 1 | RT9080-33GJ5 | RT9080:TSOT-23-5_RIT | U2 |
| 1 | Red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | SMF05C.TCT | SMF05C:SC70-6L_SEM | CR1 |
| 1 | Speaker_Crystal | LD-BZPN-1705:LDBZPN1705 | LS1 |
| 1 | USB_C_2.0 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | VBATT_TEST | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | VIN | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP5 |
| 1 | VUSB_TEST | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP4 |
| 1 | Yellow | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
The 47 most common of 51 parts.
Similar boards
- 4 layers108 × 110 mm

- 4 layers80.6 × 60.6 mm

Lorawan sensor node v2
ElektorLabs/lorawan-sensor-node-v2
Solar Powered LoRaWAN Sensor Node V2
84 parts1GPL-3.0 - 2 layers96.2 × 129.6 mm

- 2 layers68.4 × 51.1 mm

- 2 layers52 × 29 mm

Cellular featherwing pcb
keenanjohnson/cellular-featherwing-pcb
The PCB Design for a Cellular Adafruit Featherwing based on the Quectel BG96 LTE Cat M1 & Cat NB1.
64 parts1 - 4 layers37.6 × 34.9 mm

- 2 layers42 × 59.5 mm

ESP32 adon
Stan-debakker/grap-6TWEA
Daarnaast moest ik ervoor zorgen dat de nieuwe sensoren correct werken. Ik ben gestart met experimenteren via Arduino IDE, zie "codearduinoIDE".
37 parts - 2 layers80 × 50 mm

Questions
How big is the Project PCB PCB?
It measures 70.6 × 70.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Project PCB use?
51 parts, built around the ESP32-S3-WROOM-1-N8, LMV321, MCP73831T-2ACI/OT-HXY and RT9080-33GJ5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Project PCB KiCad files?
From the hhh2004/DTAP2025_Team7_PCB repository on GitHub, at the commit this page was made from: the board is Project_PCB/Project_PCB.kicad_pcb and its schematic Project_PCB/Project_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Project PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask hhh2004 before reusing the design.