

Audio test board
Breakout/testing board for the ES8327 dual channel audio CODEC
- Size
- 100 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 152
- Nets
- 109
- Pads
- 494
- Tracks, vias
- 882, 252
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Jun 2023
- Updated
- 7 Sep 2023
Overview
Audio test board is an open-source printed circuit board by Thecactusman0, from the Thecactusman0/ES8327-Breakout repository on GitHub. It is a 4-layer board of 100 × 50 mm with 152 parts on 109 nets, routed with 882 tracks and 252 vias.
It is built around the ESP32-WROOM-32, CH9102F and LM4990MM, with the XC6210B332MR, ULC0511CDN and AO3400A among its other parts. Its parts include 42 capacitors, 37 resistors, 10 diodes, 6 ICs and 4 transistors. It belongs with the audio and music and interfaces and adapters boards and the ESP32 boards of this library.
Main components
9ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesCH9102F
QFN-24-EP(4x4)-40℃~+85℃ 1.8V、2.5V、3.3V、5V 3mA 4Mbps 90uA USB 2.0 USB to UART QFN-24-EP(4x4) USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersLM4990MM
VSSOP-8-40℃~+85℃ 0.2% 1-Channel 2.2V~5.5V 2Wx1@4Ω 3mA 60dB Automatic mute/no-noise switch、Enable/shutdown function、ESD protection Class AB VSSOP-8 Audio Amplifiers ROHSTexas InstrumentsAudio AmplifiersXC6210B332MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 450mV@(800mA) 5.5V 70dB@(1kHz) 800mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsULC0511CDN
DFN1006-2-55℃~+125℃ 1 10V 1A@8/20us 200nA 3pF 5V 6V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 DFN1006-2 ESD and Surge Protection (TVS/ESD) ROHSShenzhen Jinkaisheng ElecESD And Surge Protection (TVS/ESD)AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsGMI6050P-36DB
插件,D=6mm-20℃~+70℃ -36dB 1.9mm 2.2kΩ 4.5V 500uA 58dB 5mm 6mm Omnidirectional Through-hole 插件,D=6mm Microphones ROHSINGHAiMicrophonesPJ-316A-6A
SMD3.5mm Headphone Jack 30V 500mA Gold Phosphor bronze SMD Audio Connectors ROHSHRO ElectronicsAudio Connectors (Headphones)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdES8327 Breakout
Breakout/testing board for the ES8327 dual channel audio CODEC
Wouldnt recommend building, works but could be done better. Mclk should be on either 0,1 or 3. Not 32. There should also be a 10k pulldown on the left out channel. This resistor is not in the datasheet but is required for the interrupt. On the topic of the interrupt it needs to be moved from io2 as depending on how its configured you can stop the esp32 booting. Among other small things. Working on a standalone breakout for this chip, stay tuned.
Parts
152| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +16 |
| 18 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C10, C11, C16, C17, C26, C30, C32, C33, C34, C43, C45 +2 |
| 6 | 100K | Resistor_SMD:R_0402_1005Metric | R10, R19, R20, R21, R27, R35 |
| 6 | 10pF | Capacitor_SMD:C_0402_1005Metric | C19, C21, C23, C40, C41, C42 |
| 6 | 33pF | Capacitor_SMD:C_0402_1005Metric | C18, C20, C22, C37, C38, C39 |
| 5 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R4, R18, R25, R26 |
| 5 | 330 | Resistor_SMD:R_0402_1005Metric | R12, R13, R14, R36, R37 |
| 4 | 2K | Resistor_SMD:R_0402_1005Metric | R1, R2, R5, R6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H5 |
| 4 | ULC0511CDN | Diode_SMD:DFN1006 | D4, D5, D7, D8 |
| 3 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C7, C24, C25 |
| 3 | 1M | Resistor_SMD:R_0402_1005Metric | R17, R22, R28 |
| 3 | 2SC4617R BR | Package_TO_SOT_SMD:SOT-523 | Q2, Q3, Q5 |
| 3 | DNP | Resistor_SMD:R_0402_1005Metric | R32, R33, R34 |
| 3 | LED | LED_SMD:LED_0402_1005Metric | D1, D2, D3 |
| 3 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2, SW4 |
| 3 | TBD | Resistor_SMD:R_0402_1005Metric | FB1, FB2, FB4 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C35, C36 |
| 2 | 20K | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | 220R | Resistor_SMD:R_0402_1005Metric | R7, R11 |
| 2 | 22uF | Capacitor_SMD:C_0402_1005Metric | C15, C44 |
| 2 | 33R | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R23, R24 |
| 2 | 5K | Resistor_SMD:R_0402_1005Metric | R29, R30 |
| 2 | LOGO | LOGO | G***, G1 |
| 1 | C530557 | Battery:batt conn | LS2 |
| 1 | 0.39uF | Capacitor_SMD:C_0603_1608Metric | C28 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R31 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C29 |
| 1 | 4.7nF | Capacitor_SMD:C_0805_2012Metric | C31 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | C233939 | Audio_Module:Electret mic 6mm 1.9mm pins | MK1 |
| 1 | CH9102F | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U5 |
| 1 | Display | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U4 |
| 1 | LM4990MM | Package_SO:TSSOP-8_3x3mm_P0.65mm | U3 |
| 1 | MCP1700x-180xxTT | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | Micro_SD_Card_Det1 | Connector_Card:microSD_HC_Molex_104031-0811 | J3 |
| 1 | PJ-316A-6A | Audio_Module:PJ-316A-6A | J1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D6 |
| 1 | Polyfuse | Fuse:Fuse_0603_1608Metric | F2 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW3 |
| 1 | RX | LED_SMD:LED_0402_1005Metric | D11 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TX | LED_SMD:LED_0402_1005Metric | D10 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2 |
| 1 | XC6210B332MR | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | ~ | Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm_ThermalVias | U1 |
Similar boards
- 4 layers46 × 100 mm

- 4 layers37.6 × 34.9 mm

- 2 layers90 × 100 mm

- 4 layers61.9 × 84.4 mm

FastStepper
harp-tech/device.faststepper
A fast moving stepper motor controller device, with acceleration, jerk control, and end stop support
141 parts - 2 layers75.1 × 100 mm

- 4 layers100 × 120 mm

- 4 layers160.7 × 51.7 mm

- 4 layers51 × 33 mm

Questions
How big is the Audio test board PCB?
It measures 100 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Audio test board use?
152 parts, built around the ESP32-WROOM-32, CH9102F, LM4990MM and XC6210B332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Audio test board KiCad files?
From the Thecactusman0/ES8327-Breakout repository on GitHub, at the commit this page was made from: the board is Kicad/Audio test board.kicad_pcb and its schematic Kicad/Audio test board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Audio test board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Thecactusman0 before reusing the design.