Skip to the content
25

CH9102F

WCH (Nanjing Qinheng Microelectronics)Extended

-40℃~+85℃ 1.8V、2.5V、3.3V、5V 3mA 4Mbps 90uA USB 2.0 USB to UART QFN-24-EP(4x4) USB Converters ROHS

Part id
wch/CH9102F
Category
USB Converters
Package
QFN-24-EP(4x4)
Pins
25
In stock
9,218 at JLCPCB (C2858418)
Used on
16 open-source boards

Overview

The CH9102F is a USB Converter made by WCH (Nanjing Qinheng Microelectronics) in a QFN-24-EP(4x4) package with 25 pins. -40℃~+85℃ 1.8V、2.5V、3.3V、5V 3mA 4Mbps 90uA USB 2.0 USB to UART QFN-24-EP(4x4) USB Converters ROHS.

PCBKit's library has its KiCad symbol (Interface_USB:CH9102F, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm, from KiCad's library), ready for a KiCad board. 9,218 are in stock at JLCPCB (part C2858418). 16 open-source boards in 13 repositories on GitHub use it.

Symbol

1RI2GND3D+4D-5VIO6V37VDD58VBUS9RST10ACT11WAKEUP/GPIO312TNOW/GPIO213RXS/GPIO114TXS/GPIO015SUSPEND16GPIO417SUSPEND18CTS19RTS20RXD21TXD22DSR23DTR24DCD
Interface_USB:CH9102FFrom KiCad's library

Footprint

25
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmFrom KiCad's library

From the datasheet

14
Supply, least
4 V · VDD5, recommended operating, 5 V mode, min · p. 6
Supply, most
5.5 V · VDD5, recommended operating, 5 V mode, max · p. 6
Supply, least
3 V · VDD5, recommended operating, V3 connected to VDD5, min · p. 6
Supply, most
3.6 V · VDD5, recommended operating, V3 connected to VDD5, max · p. 6
Supply, least
1.7 V · VIO, recommended operating, min · p. 6
Supply, most
5.5 V · VIO, recommended operating, max · p. 6
Supply, absolute maximum
6 V · VDD5, absolute maximum · p. 5
Supply, absolute maximum
6 V · VIO, absolute maximum · p. 5
Works from
-40 °C · operating ambient, min · p. 5
Works up to
85 °C · operating ambient, max · p. 5
Takes working
3 mA · sum of VDD5 or V3 and VIO operating currents, typical · p. 6
Takes asleep
92 µA · sum of VDD5 and VIO USB suspend currents, 5 V, no I/O load or pull-up, typical · p. 6
Takes asleep
87 µA · sum of VDD5=V3 and VIO USB suspend currents, 3.3 V, no I/O load or pull-up, typical · p. 6
Data rate, most
4 Mbit/s · UART baud rate, max · p. 1

Open-source boards using it

16See all 16
  • 4 layers102.4 × 27.5 mmGLARE, the printed circuit board in 3D

    GLARE

    RR-CREATOR/GLARE

    Glasses Linked Augmented Reality Engine

    102 parts10MIT
  • 2 layers75.1 × 100 mmZamkonator, the printed circuit board in 3D

    Zamkonator

    alufers/Zamkonator

    RFID access-control board with PoE and Wiegand

    182 parts5
  • 4 layers100 × 50 mmAudio test board, the printed circuit board in 3D

    Audio test board

    Thecactusman0/ES8327-Breakout

    Breakout/testing board for the ES8327 dual channel audio CODEC

    152 parts2
  • 6 layers76.5 × 69 mmFmc usb gpio spi jtag, the printed circuit board in 3D

    Fmc usb gpio spi jtag

    vowstar/rocket-pcb-orig

    FMC template board

    146 parts2Apache-2.0
  • 4 layers85 × 9 mmOSSG v0p4, the printed circuit board in 3D

    OSSG v0p4

    aezrapour/RINSIGHT

    This version was an attempt to use a 2S battery pack. The main issue is that as of 2022-09-15, there are not many 2S battery charging IC's nor a nice i2C fuel gauge IC, so at the moment, this is a dead end design.

    82 partsMIT
  • 2 layersFreeX, the printed circuit board in 3D

    FreeX

    hancho6319/FreeX

    This is FreeX project I designed for Sinan Yilmaz, Turkey 🇹🇷

    46 parts
  • 2 layers70.4 × 29.6 mmUSB CH9102F, the printed circuit board in 3D

    USB CH9102F

    hirakuni45/RX

    Renesas RX Microcontroller, C++ framework, Library, Sample

    30 parts86BSD-3-Clause

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the CH9102F?

Yes. The symbol is Interface_USB:CH9102F and the footprint Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the CH9102F?

QFN-24-EP(4x4), with 25 pins. Its footprint is drawn on this page.

Where is the CH9102F datasheet?

WCH (Nanjing Qinheng Microelectronics) publishes it: the Datasheet link on this page opens it.

Where can I order the CH9102F?

JLCPCB lists it as part C2858418, with 9,218 in stock; the sellers' links on this page open their listings.

What can replace the CH9102F?

Parts like it in the library: the CP2102N-A02-GQFN24R by Silicon Labs, the CP2104-F03-GMR by Silicon Labs, the USB3343-CP by Microchip Technology and the USB3343-CP-TR by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the CH9102F?

16 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.