Skip to the content
4 layers100 × 120 mmNeoPod, the printed circuit board in 3D

A modernized 'ipod' with bluetooth capabilities

Size
100 × 120 mm
Copper layers
4
Thickness
1.6 mm
Parts
62
Nets
154
Pads
379
Tracks, vias
461, 67
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 May 2025
Updated
6 Aug 2025

Overview

NeoPod is an open-source printed circuit board by lsyzg, from the lsyzg/NeoPod repository on GitHub. It is a 4-layer board of 100 × 120 mm with 62 parts on 154 nets, routed with 461 tracks and 67 vias.

It is built around the RP2040, ESP32-WROOM-32 and PCM5102APW, with the STC4054GR, XC6210B332MR and CSD25480F3 among its other parts. Its parts include 21 capacitors, 18 resistors, 8 ICs, 5 switches and 3 connectors. It belongs with the ESP32 and RP2040 boards of this library.

Main components

8

README

README.md

NeoPod

A modern, bluetooth compatible handheld music player

Parts

62
QtyValueFootprintReferences
60.1uFCapacitor_SMD:C_0603_1608MetricC1, C7, C9, C10, C14, C15
62.2uFCapacitor_SMD:C_0603_1608MetricC5, C24, C27, C28, C29, C30
5SW_SPSTKailh_Choc_White:Choc_V1SW1, SW2, SW3, SW4, SW5
410uFCapacitor_SMD:C_0402_1005MetricC2, C6, C8, C11
45.1kResistor_SMD:R_0603_1608MetricR9, R10, R13, R14
322Resistor_SMD:R_0402_1005MetricR3, R4, R5
218pFCapacitor_SMD:C_0603_1608MetricC12, C13
22.2nFCapacitor_SMD:C_0603_1608MetricC3, C4
222kResistor_SMD:R_0603_1608MetricR7, R8
2470Resistor_SMD:R_0603_1608MetricR1, R2
2USB4500-03-0-A_REVA1USB-C-2.0-24P(16+8):GCT_USB4500-03-0-A_REVA1J2, J4
10kResistor_SMD:R_0402_1005MetricR6
1100Resistor_SMD:R_0402_1005MetricR18
1100kResistor_SMD:R_0402_1005MetricR15
1100nFCapacitor_SMD:C_0402_1005MetricC26
110kResistor_SMD:R_0603_1608MetricR11
12.2kResistor_SMD:R_0603_1608MetricR17
12.7kResistor_SMD:R_0603_1608MetricR16
120kResistor_SMD:R_0603_1608MetricR12
140MHz-XtalCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY2
1Battery_CellConnector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalBT1
1CP2102N-Axx-xQFN24Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU4
1CSD25480F3Package_DFN_QFN:Texas_PicoStar_DFN-3_0.69x0.60mmQ1
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U1
1LEDLED_SMD:LED_0603_1608MetricD2
1MSK4005Diode_SMD:D_SOD-523D1
1PCM5102APackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU2
1RP2040Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mmU3
1SJ-3523-SMT-TRConnector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_HorizontalJ1
1SN74CB3Q3257DBQRSN74CB3Q3257DBQR:SN74CB3Q3257DBQRU10
1STC4054GRSTC4054GR:SOT95P280X110-5NU6
1SW6SW_TS-1088-AR2016:SW_TS-1088-AR02016POWER1
1TFT_320x240TFT-320x240:TFT-320x240U7
1XC6210B332MRPackage_TO_SOT_SMD:SOT-23-5U5
1~Adafruit_MicroSD_Socket:MicroSD_SocketX1

Similar boards

  • 2 layers100 × 90 mmPowerbank devboard, the printed circuit board in 3D

    Powerbank devboard

    math-milan/PowerbankTestCode

    This is a firmware for a Powerbank testboard where i want to evealuate multiple ti chips like the tps25751

    185 parts2MIT
  • 4 layers21 × 17.8 mmXIAO ESP32C3, the printed circuit board in 3D

    XIAO ESP32C3

    bombarie/jaha-koo-eel

    A robotic remote controlled eel. A prop for the play Haribo Kimchi.

    68 parts1
  • 8 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    cdg66/ExAce

    Framework ExpansionFPGA acceleration module

    207 parts37CC-BY-4.0
  • 2 layers8-ball badge, the printed circuit board in 3D

    8-ball badge

    tylercrumpton/magic-8-badge

    An Open Source CircuitPython-compatible PCB badge that can (maybe) tell the future!

    90 parts2
  • 2 layers84.2 × 52 mmPicoPico, the printed circuit board in 3D

    PicoPico

    DavidVentura/PicoPico

    Pico-8 Player

    57 parts141
  • 2 layers37 × 23.5 mmSmartWatch, the printed circuit board in 3D

    SmartWatch

    Sl-Alex/SmartWatch

    SmartWatch with BLE (open-source SW and HW)

    66 parts1GPL-3.0
  • 2 layers119 × 79 mmHome Ambient, the printed circuit board in 3D

    Home Ambient

    abrahanlp/Home-Ambient

    2-wire home thermostat with temperature, humidity, pressure and air quality measures.

    62 partsAGPL-3.0

Questions

How big is the NeoPod PCB?

It measures 100 × 120 mm and has 4 copper layers, 1.6 mm thick.

What parts does the NeoPod use?

62 parts, built around the RP2040, ESP32-WROOM-32, PCM5102APW and STC4054GR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the NeoPod KiCad files?

From the lsyzg/NeoPod repository on GitHub, at the commit this page was made from: the board is NeoPod-KiCad/NeoPod.kicad_pcb and its schematic NeoPod-KiCad/DACjack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the NeoPod design in my own project?

Its repository states no licence, so its author keeps all rights: ask lsyzg before reusing the design.