

AWS PROJECT
AWS Project Gen4
- Size
- 206.3 × 91.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 317
- Nets
- 260
- Pads
- 1,019
- Tracks, vias
- 1,622, 617
- Pours
- 30
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Jan 2026
- Updated
- 7 Oct 2026
Overview
AWS PROJECT is an open-source printed circuit board by marydovika, from the marydovika/AWS repository on GitHub. It is a 2-layer board of 206.3 × 91.3 mm with 317 parts on 260 nets, routed with 1,622 tracks and 617 vias.
It is built around the AMS1117-3.3, 1N5819WS and PESDHC3D3V3U, with the MMBT3904, B540C-13-F-MS and U.FL-R-SMT(10) among its other parts. Its parts include 75 resistors, 68 capacitors, 30 connectors, 20 diodes and 7 transistors.
Main components
6AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesPESDHC3D3V3U
SOD-32315A@8/20us 1uA 280W@8/20us 280pF 3.3V 5V 6.5V、7.4V、9V TVS Unidirectional SOD-323 ESD and Surge Protection (TVS/ESD) ROHSShanghai Prisemi ElecESD And Surge Protection (TVS/ESD)MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)B540C-13-F-MS
SMC-65℃~+125℃ 1 Independent 175A 40V 500uA@40V 5A 750mV@5A SMC Schottky Diodes ROHSMSKSEMISchottky DiodesU.FL-R-SMT(10)
SMD-40℃~+90℃ 1 1.25mm 2mm 50Ω 6GHz Board Side IPEX Male Pin SMD Coaxial Connectors (RF) ROHSHirose ElectricCoaxial Connectors (RF)
README
README.md//////////////////////////////////////////////////////////////////////////////////////////////////
System Description:
Automatic Weather Stations (AWS) play a critical role in environmental monitoring, yet their deployment in remote and energy-constrained locations remains limited by rigid and monolithic power architectures. Conventional systems are often designed for single energy sources, leading to inefficiencies, frequent power interruptions, high maintenance costs, and poor adaptability to dynamic environmental conditions. This research proposes the development of a modular and adaptive power electronics system architecture tailored for energy-constrained AWS deployments. Modular design; The modular design introduces swappable converter topologies that allow scalable integration (multiplexing) of multiple energy sources, including solar, DC input and batteries, while simplifying upgrades, repairs, and fault isolation. Adaptive design; Complementing the modular design, an adaptive control strategy will be implemented to dynamically optimize power flow in response to load variations, energy resource intermittency, in-system parameter drifts, and external/environmental disturbances, thereby enhancing system stability and efficiency. The study will involve system design, prototype development, and two algorithm development (both AMPC-based), followed by performance evaluation under varying operating conditions and benchmarking. Field deployment of Final product (PCB, Case Unit, and Mounting frame).
Expected outcomes include; improved system energy efficiency, fault tolerance, and operational autonomy, ensuring more reliable and sustainable weather data collection in energy resource-constrained and off-grid regions. The findings of this research will contribute to advancing resilient power system solutions that support agriculture, public safety, infrastructure planning, and climate research. with a civil and possible military adaptation.
Project is funded by: https://www.ademneaproject.net
//////////////////////////////////////////////////////////////////////////////////////////////////
Parts
317| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | Jumper_2_Small_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP10, JP10, JP11, JP11, JP12, JP12, JP13, JP13, JP14, JP15, JP16, JP17, JP18, JP18, JP19 +13 |
| 21 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | PB1, PB2, PB3, PB4, PB10, PB11, PB12, PB13, PB14, PB15, PB16, PB17, PB18, PB19, PB20, PB21 +5 |
| 20 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | SNS_TX1, SNS_TX2, SNS_TX3, SNS_TX4, SNS_TX5, SNS_TX10, SNS_TX11, SNS_TX12, SNS_TX13, SNS_TX14, SNS_TX15, SNS_TX16, SNS_TX17, SNS_TX18, SNS_TX19, SNS_TX20 +4 |
| 17 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C6, C11, C12, C13, C15, C18, C26, C27, C28, C33, C34, C65, C67, C69 +1 |
| 15 | 4.7k | Resistor_SMD:R_0603_1608Metric | R2, R3, R5, R6, R7, R8, R13, R14, R20, R21, R25, R26, R32, R33, R38 |
| 11 | 10K | Resistor_SMD:R_0603_1608Metric | R37, R54, R55, R69, R71, R73, R75, R77, R79, R80, R82 |
| 11 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J4, J8, J9, J10, J29, J30, J31, J32 |
| 10 | NET_LED | Diode_SMD:D_0603_1608Metric | D5, D8, D9, D11, D13, D14, D17, D18, D19, D20 |
| 9 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C16, C29, C31, C36, C63, C64 |
| 7 | 1k | Resistor_SMD:R_0603_1608Metric | R9, R15, R16, R23, R29, R31, R35 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R10, R11, R12, R30, R34 |
| 6 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C30, C35, C61, C62 |
| 5 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U2, U10, U12, U17 |
| 5 | B2B-XH-A_LF__SN_ | B2B-XH-A_LF__SN_:JST_B2B-XH-A_LF__SN_ | J13, J14, J21, J23, J33 |
| 5 | B3B-XH-A_LF__SN_ | B3B-XH-A_LF__SN_:JST_B3B-XH-A_LF__SN_ | J12, J18, J19, J20, J22 |
| 4 | 1N5819WS | Diode_SMD:D_SOD-323 | D20, D21, D24, D25 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C40, C41, C43, C53 |
| 4 | B4B-XH-A_LF__SN_ | B4B-XH-A_LF__SN_:JST_B4B-XH-A_LF__SN_ | J11, J15, J17, J28 |
| 4 | Cm | Capacitor_SMD:C_0603_1608Metric | C5, C10, C21, C22 |
| 4 | PESDHC3D3V3U | Diode_SMD:D_SOD-323F | D3, D4, D7, D22 |
| 3 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C25, C47, C48 |
| 3 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C56, C59, C60 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C32, C68, C71 |
| 3 | 5K1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R62, R63, R65 |
| 3 | Jumper_2_Small_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP19, JP19, JP21 |
| 3 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J25, J26, J27 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R1, R24 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C37, C49 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C38, C54 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C72, C73 |
| 2 | 23.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R46, R48 |
| 2 | 270R | Resistor_SMD:R_0603_1608Metric | R42, R43 |
| 2 | 2N7002 | PCM_JLCPCB:Q_SOT-23 | Q4, Q7 |
| 2 | 3.9 | Resistor_SMD:R_0603_1608Metric | R44, R45 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R40, R41 |
| 2 | 5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R47, R49 |
| 2 | B540C-13-F | Diode_SMD:D_SMB-SMC_Universal_Handsoldering | D21, D23 |
| 2 | NMOS | NTMFS4H01NFT3G:TRANS_NVMFS5834NLWFT1G | Q5, Q6 |
| 2 | SW_SPST | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1, SW2 |
| 2 | U.FL-R-SMT(10) | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | GSM1, GSM2 |
| 1 | |||
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C39 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C50 |
| 1 | 0.1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C42 |
| 1 | 1.2K | Resistor_SMD:R_0603_1608Metric | R78 |
| 1 | 1.5K | Resistor_SMD:R_0603_1608Metric | R74 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R58 |
| 1 | 10 | Resistor_SMD:R_1812_4532Metric | R61 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R59 |
| 1 | 100k | Resistor_SMD:R_1812_4532Metric | TH1 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C45 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C17 |
| 1 | 104224-0820 | 104224-0820:MOLEX_104224-0820 | J7 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C66 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C46 |
| 1 | 10uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C57 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_5x5.8 | C44 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C51 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R39 |
| 1 | 13k | Resistor_SMD:R_0603_1608Metric | R72 |
| 1 | 154k | Resistor_SMD:R_0603_1608Metric | R66 |
| 1 | 162k | Resistor_SMD:R_0603_1608Metric | R68 |
| 1 | 2.2 | Resistor_SMD:R_0603_1608Metric | R60 |
| 1 | 2.7nF | Capacitor_SMD:C_0603_1608Metric | C55 |
| 1 | 20K | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R70 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C14 |
| 1 | 25k | Resistor_SMD:R_0603_1608Metric | R52 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R76 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R81 |
| 1 | 33pF | Capacitor_SMD:C_0603_1608Metric | C58 |
| 1 | 36K | Resistor_SMD:R_0603_1608Metric | R51 |
| 1 | 4.22M | Resistor_SMD:R_0603_1608Metric | R64 |
| 1 | 499K | Resistor_SMD:R_0603_1608Metric | R50 |
| 1 | 5.23k | Resistor_SMD:R_0603_1608Metric | R56 |
| 1 | 503398-1892 | 503398-1892:MOLEX_503398-1892 | J16 |
| 1 | 51.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R53 |
| 1 | 6.1uH | MPPT INDUCTORS:CDEP147NP-6R1MC-95 | L1 |
| 1 | 7.5k | Resistor_SMD:R_0603_1608Metric | R57 |
The 285 most common of 317 parts.
More from marydovika/AWS
3- 2 layers175 × 90 mm

- 2 layers140 × 90 mm

- 2 layers214.9 × 91.5 mm

Similar boards
- 4 layers37.6 × 34.9 mm

- 4 layers164 × 118 mm

OpenEFI rev4 bkp
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
345 parts8CERN-OHL-S-2.0 - 2 layers65 × 56 mm

- 2 layers50 × 53 mm

Picoquorum key
jmcpheron/pico-quorum
Several people, several keys, one Safe. Hardware approvals for Safe multisig wallets.
71 partsMIT - 2 layers99.5 × 90.5 mm

- 2 layers102 × 102 mm

- 2 layers93.8 × 73.5 mm

SimplerFlightV2
elenajusto/SimplerFlightV2
PCB for team rocket air brakes. (Never manufactured).
114 parts - 2 layers128.7 × 60.3 mm

MOBILE
sumit123hub/Mobile-PCB-Files-
I always dreamed of building my own mobile system. This repo documents my journey designing a custom ESP32 PCB featuring a GSM module, display interface, and complete Battery Management System (BMS).
92 parts
Questions
How big is the AWS PROJECT PCB?
It measures 206.3 × 91.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AWS PROJECT use?
317 parts, built around the AMS1117-3.3, 1N5819WS, PESDHC3D3V3U and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AWS PROJECT KiCad files?
From the marydovika/AWS repository on GitHub, at the commit this page was made from: the board is KiCAD FILES__PCBA__Ver1/AWS PROJECT.kicad_pcb and its schematic KiCAD FILES__PCBA__Ver1/AWS PROJECT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AWS PROJECT design in my own project?
Its repository states no licence, so its author keeps all rights: ask marydovika before reusing the design.