Skip to the content
2 layers83.8 × 101.6 mmSolder practice heart, the printed circuit board in 3D

Solder practice heart

sgofferj/Solder-practice-heart1

Solder practice PCB for kids

Size
83.8 × 101.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
19
Pads
52
Tracks, vias
34, 0
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
15 Feb 2025
Updated
16 Feb 2025

Overview

Solder practice heart is an open-source printed circuit board by sgofferj, from the sgofferj/Solder-practice-heart repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 83.8 × 101.6 mm with 26 parts on 19 nets, routed with 34 tracks and 0 vias.

It is built around the CR2032. Its parts include 16 diodes and 8 resistors.

Main components

1

README

README.md

Solder practice PCB for kids

License: CC-BY-SA 4.0

Solder-practice-heart-front.pngSolder-practice-heart-back.png

I designed this PCB to teach my 6 years old son soldering and some electronics basics. The cutout on top fits a standard ID card clip, so the PCB can be worn as some kind of brooch if desired.

The resistors need to be calculated according to the LED color and the desired current. Red LEDs running at 10mA would be 150R.

Parts

26
QtyValueFootprintReferences
16LED_5mm_RedPCM_LED_THT_AKL:LED_D5.0mmLED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12, LED13, LED14, LED15, LED16
8150RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8
2CR2032PCM_JLCPCB:BAT-TH_BS-07-A1BJ001BAT1, BAT2

Similar boards

  • 2 layers333.4 × 149.9 mmOmega Mainboard, the printed circuit board in 3D

    Omega Mainboard

    skiselev/omega

    Omega Home Computer

    248 parts459GPL-3.0
  • 2 layers17.2 × 30.4 mmWeigand, the printed circuit board in 3D

    Weigand

    linklayer/BLEKey

    A Bluetooth Low Energy device for interfacing with Wiegand

    17 parts268
  • 4 layers188 × 188 mmITX Llama, the printed circuit board in 3D

    ITX Llama

    eivindbohler/itxllama

    422 parts246GPL-3.0
  • 2 layers61 × 36.8 mmKeebcard, the printed circuit board in 3D

    Keebcard

    rsheldiii/Keebcard

    Home of the KeebCard project - Kicad files, code, and more!

    15 parts112
  • 2 layers59.2 × 41 mmBluey, the printed circuit board in 3D

    Bluey

    electronut/ElectronutLabs-bluey

    Nordic nRF52832 BLE development board with sensors.

    79 parts96
  • 2 layers35 × 35 mmQron0b, the printed circuit board in 3D

    Qron0b

    qewer33/qron0b

    a sleek and low-power binary wristwatch

    35 parts62GPL-3.0
  • 2 layers90 × 89.4 mm38-04-usb sleuth, the printed circuit board in 3D

    38-04-usb sleuth

    smaroukis/usb-sleuth

    USB cable continuity tester ++

    68 parts61
  • 2 layers170.2 × 100 mmZ80-SBC, the printed circuit board in 3D

    Z80-SBC

    skiselev/zeta_sbc

    Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware

    75 parts53GPL-3.0

Questions

How big is the Solder practice heart PCB?

It measures 83.8 × 101.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Solder practice heart use?

26 parts, built around the CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Solder practice heart KiCad files?

From the sgofferj/Solder-practice-heart repository on GitHub, at the commit this page was made from: the board is Solder practice heart.kicad_pcb and its schematic Solder practice heart.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Solder practice heart design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).