4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers17.8 × 33 mm
Vibration-based, free-mounted z-probe sensor with micron accuracy for 3d printers (DIY THT/breadboard edition)
- Size
- 17.8 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 11
- Pads
- 40
- Tracks, vias
- 33, 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 30 May 2023
- Updated
- 30 May 2023
Overview
Tap is an open-source printed circuit board by sevkin, from the sevkin/tap-attiny repository on GitHub. It is a 2-layer board of 17.8 × 33 mm with 14 parts on 11 nets, routed with 33 tracks and 2 vias.
It is built around the ATTINY13V-10PU and 1N4148W. Its parts include 5 resistors, 3 diodes, 3 connectors, 2 capacitors and 1 IC. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY13V-10PU
PDIP-8-40℃~+85℃ 1.8V~5.5V 10MHz 10bit 1KB 6 64Byte 64Byte 8 Bit AVR Built-in FLASH PDIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
README
README.mdПьезоконцевик TAP350
Для дельтапринтеров и прочих воронов
- Микроконтроллер attiny13a
- Пьеза 35мм
- Шар 8г (тяжелее 10г может не работать)
Прошивочный разъём при*ан на от**бись мгтф проводом.
Основан на схеме и прошивке https://github.com/ripinteer/tap-attiny/
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2 |
| 2 | 1N4148W | Diode_THT:D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp | D1, D2 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4, R5 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | ATtiny13V-10P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_XH_S3B-XH-A-1_1x03_P2.50mm_Horizontal | J2 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | LED_Dual_AKA | LED_THT:LED_D3.0mm-3 | D3 |
| 1 | piezo | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm
- 4 layers95.6 × 73.6 mm
- 2 layers141.5 × 83 mm
Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm
- 2 layers99.1 × 90.7 mm
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers229.8 × 102.6 mm
Questions
How big is the Tap PCB?
It measures 17.8 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tap use?
14 parts, built around the ATTINY13V-10PU and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tap KiCad files?
From the sevkin/tap-attiny repository on GitHub, at the commit this page was made from: the board is pcb/tap.kicad_pcb and its schematic pcb/tap.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tap design in my own project?
Its repository states no licence, so its author keeps all rights: ask sevkin before reusing the design.