
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

That is 12 ethernet POE, I2C, CAN implementation. KiCAD source files
SEth is an open-source printed circuit board by SergeiSOficial, from the SergeiSOficial/SEht12 repository on GitHub, published under the MIT licence. It is a 2-layer board of 157.5 × 72.4 mm with 37 parts on 7 nets.
It is built around the RJ45. Its parts include 16 connectors, 13 capacitors, 3 diodes and 1 resistor.
That is 12 ethernet POE, I2C, CAN implementation. KiCAD source files
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | CP | Capacitors_THT:CP_Radial_D8.0mm_P3.50mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13 |
| 13 | RJ45 | .pretty:RJ45_8 | J1, J2, J3, J4, J5, J9, J10, J11, J12, J13, J14, J15, J16 |
| 4 | 3mm_Pad_Via | Mounting_Holes:MountingHole_3mm_Pad_Via | VIA1, VIA2, VIA3, VIA4 |
| 2 | Screw_Terminal_01x03 | Connectors_Terminal_Blocks:TerminalBlock_bornier-3_P5.08mm | J7, J8 |
| 1 | 1K | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | D | Diodes_SMD:D_SMB | D2 |
| 1 | D_TVS | Diodes_SMD:D_SMB | D1 |
| 1 | LED | LEDs:LED_0603_HandSoldering | D3 |
| 1 | Screw_Terminal_01x04 | Connectors_Terminal_Blocks:TerminalBlock_bornier-4_P5.08mm | J6 |

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.



nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project


Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems

mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
It measures 157.5 × 72.4 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SergeiSOficial/SEht12 repository on GitHub, at the commit this page was made from: the board is SEth.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).