2 layers103.8 × 50 mm
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558
2 layers35.6 × 88.9 mm
Controller
semteXKG/autoplaner-controller- Size
- 35.6 × 88.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 36
- Pads
- 57
- Tracks, vias
- 55, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Jan 2024
- Updated
- 15 Jan 2024
Overview
Controller is an open-source printed circuit board by semteXKG, from the semteXKG/autoplaner-controller repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 35.6 × 88.9 mm with 8 parts on 36 nets, routed with 55 tracks and 0 vias.
It is built around the ESP32-DEVKITC-VE. Its parts include 2 capacitors and 1 IC. It belongs with the ESP32 boards of this library.
Main components
1Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02_Pin | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | MOVE_TO_CONVERSION1, POWER1, SPEED1 |
| 2 | 0.1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | Display1 |
| 1 | Conn_01x05_Pin | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | RotEncoder1 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U1 |
Questions
How big is the Controller PCB?
It measures 35.6 × 88.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
8 parts, built around the ESP32-DEVKITC-VE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the semteXKG/autoplaner-controller repository on GitHub, at the commit this page was made from: the board is CAD/controller/controller.kicad_pcb and its schematic CAD/controller/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers115 × 75 mm
SpinCoater
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.
11 parts55GPL-3.0 - 2 layers127.3 × 54.1 mm
ESP32 SolarBox
cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.
34 parts42 - 2 layers62.2 × 57.1 mm
- 2 layers99.9 × 99.9 mm
- 2 layers
- 2 layers72.5 × 84.8 mm
Devboard
ste2425/PSP-Bluetooth-AVConnector
An AV-Out Breakout library for the PSP. Providing Kicad symbols and footprints to interface with the PSP 2/3K AVOut socket (also known as the TVOut socket)
13 parts12 - 2 layers100 × 88.9 mm
