

WetterStationPCB
Wetterstation controller (Akku+Buck-Boost-converter + ESP32/s3)
- Size
- 100 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 119
- Nets
- 98
- Pads
- 430
- Tracks, vias
- 754, 250
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Sep 2022
- Updated
- 30 Oct 2022
Overview
WetterStationPCB is an open-source printed circuit board by sebif2004, from the sebif2004/WetterStationPCB repository on GitHub. It is a 4-layer board of 100 × 60 mm with 119 parts on 98 nets, routed with 754 tracks and 250 vias.
It is built around the ESP32-S3-WROOM-1-N16, ISL6612ACBZ-T and ADS1015IDGS, with the HY2213-BB3A among its other parts. Its parts include 39 resistors, 29 capacitors, 16 connectors, 12 ICs and 10 transistors. It belongs with the power boards and the ESP32 boards of this library.
Main components
4ESP32-S3-WROOM-1-N16
SMD,25.5x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesISL6612ACBZ-T
SOIC-8-40℃~+85℃ 1.25A 10.8V~13.2V 18ns 2 26ns 2A Enable shutdown、Interleaved conduction protection、Dead-time control、Built-in bootstrap diode Half-Bridge MOSFET SOIC-8 Gate Drivers ROHSRenesas ElectronicsGate DriversADS1015IDGS
VSSOP-10-0.5mm-40℃~+125℃ 0.5LSB 12 128Hz、250Hz、490Hz、920Hz、1.6kHz、2.4kHz、3.3kHz 1MHz 2 2V~5.5V 2uA 3.3kHz 5ppm/℃ 6.144V Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)HY2213-BB3A
SOT-23-6-40℃~+85℃ 1 1.5V~8V 2uA 4.19V Balancing IC Lithium Battery Not supported SOT-23-6 Battery Management ROHSHYCON TechBattery Management
README
README.mdWetterStationPCB
Weather station controller (Battery + Buck-Boost-converter + ESP32/s3) 4 Layer PCB ~10A Buck Boost 21700 Battery
My second PCB disigning project (stil untestet but in manufacturing)

Parts
119| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C10, C11, C13, C14, C15, C16, C17, C18, C20, C22, C24, C25, C26 +2 |
| 12 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4, R9, R11, R12, R13, R15, R26, R27, R30, R31 |
| 6 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C7, C8, C12, C19, C27 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R7, R10, R17, R28 |
| 4 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34, R35, R38, R39 |
| 4 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13, J14, J15, J16 |
| 4 | IRF6715M | Package_DirectFET:DirectFET_MX | Q9, Q10, Q13, Q14 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 4 | Q_NMOS_DGS | Package_TO_SOT_SMD:SOT-23 | Q1, Q4, Q5, Q6 |
| 3 | BuckConverter | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U4, U5, U7 |
| 3 | C_Polarized_US | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C21, C28, C33 |
| 3 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7, J10, J11 |
| 3 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19 |
| 2 | 14k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32, R33 |
| 2 | 15k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R8 |
| 2 | 28k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R36, R37 |
| 2 | 610 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R20, R21 |
| 2 | ACS712xLCTR-20A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U6 |
| 2 | Conn_01x02_Male | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1, J6 |
| 2 | Conn_01x14_Male | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J2, J5 |
| 2 | HY2213-BB3A | SamacSys_Parts:SOT95P280X140-6N | IC2, IC3 |
| 2 | ISL6612ACBZ-T | SamacSys_Parts:SOIC127P600X175-8N | IC4, IC5 |
| 2 | Q_NMOS_DGS | Package_DirectFET:DirectFET_MX | Q2, Q3 |
| 2 | SW_DIP_x01 | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 11k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 1pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23 |
| 1 | 22uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 2xBattery+sense | Library:2x18650+21700-Holder | BT1 |
| 1 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29 |
| 1 | 500 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 6k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | 7500 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 8k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
| 1 | ADS1015IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | BoostConverter | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U1 |
| 1 | Conn_01x03_Male | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06_Male | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | D | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | ESP32-S3-WROOM-1-N16 | SamacSys_Parts:ESP32S3WROOM1N16 | IC1 |
| 1 | INDUCTOR | Library:Inductor-Universal-15x15 | L1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J17 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP6 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | P1 |
Similar boards
- 2 layers151 × 118 mm

- 4 layers300 × 200 mm

- 4 layers236.1 × 156.9 mm

- 2 layers99.8 × 50.8 mm

- 2 layers48 × 48 mm

- 2 layers80 × 17.8 mm

- 4 layers85 × 56 mm

- 2 layers57.8 × 34 mm

DangerDonut
gavin4d/dangerDonut
Danger Donut is a work-in-progress 150 gram melty brain combat robot.
65 parts5
Questions
How big is the WetterStationPCB PCB?
It measures 100 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the WetterStationPCB use?
119 parts, built around the ESP32-S3-WROOM-1-N16, ISL6612ACBZ-T, ADS1015IDGS and HY2213-BB3A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WetterStationPCB KiCad files?
From the sebif2004/WetterStationPCB repository on GitHub, at the commit this page was made from: the board is KicadProjekt/WetterStationPCB.kicad_pcb and its schematic KicadProjekt/WetterStationPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WetterStationPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask sebif2004 before reusing the design.