2 layers52 × 44 mm
2 layers99.8 × 50.8 mm
- Size
- 99.8 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 254
- Nets
- 165
- Pads
- 717
- Tracks, vias
- 1,553, 456
- Pours
- 93
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Mar 2020
- Updated
- 17 Mar 2020
Overview
Sd04 is an open-source printed circuit board by Ron-Z, from the Ron-Z/PCB_SD04-PCM-DW01 repository on GitHub. It is a 2-layer board of 99.8 × 50.8 mm with 254 parts on 165 nets, routed with 1,553 tracks and 456 vias.
It is built around the DW01A-G, HY2213-BB3A and MMBT3906, with the P75N02LDG-VB and MMBT3904 among its other parts. Its parts include 128 resistors, 40 transistors, 39 ICs, 27 capacitors and 13 diodes.
Main components
5
DW01A-G
SOT-23-6-40℃~+85℃ 1 2.5V~4.35V 3V 3uA 4.3V Lithium Battery Not supported Not supported Protection IC SOT-23-6 Battery Management ROHSFortune SemiconBattery ManagementHY2213-BB3A
SOT-23-6-40℃~+85℃ 1 1.5V~8V 2uA 4.19V Balancing IC Lithium Battery Not supported SOT-23-6 Battery Management ROHSHYCON TechBattery Management
MMBT3906
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200mA 200mW 300MHz 300mV 40V 5V PNP SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
P75N02LDG-VB
TO-252-55℃~+175℃ 1 N-channel 1.525nF 1.5V、2.5V 100A 235W 2mΩ@10V、3mΩ@4.5V 30V 5.201nF 71.5nC@4.5V、151nC@10V 770pF N-Channel TO-252 MOSFETs ROHSVBsemi ElecMOSFETsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
705_PCB_SD04-PCM-DW01/191212_shark04_dw01/readme.mdChange log
v0.1 Draft release
v0.2 - 20200316
- 根据需求增加了 均衡指示灯
- 修改了部分不合理的布线。
Parts
254| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 1M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R10, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R106, R110, R116 +15 |
| 27 | 510K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36, R111 +11 |
| 26 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C22, C23, C24 +10 |
| 26 | 100R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R42, R43, R44, R45, R46, R47, R48, R49, R50, R51, R72, R73, R100, R113, R114, R115 +10 |
| 26 | 150R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R52, R53, R54, R55, R56, R57, R58, R59, R60, R61, R103, R104, R105, R107, R108, R109 +10 |
| 26 | MMBT3906 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +10 |
| 14 | 1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R97, R117, R118, R119, R120, R121, R122, R123, R124, R125, R126, R127, R128 |
| 13 | DW01A-G | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | IC1, IC2, IC3, IC4, IC5, IC6, IC7, IC8, IC9, IC10, IC11, IC12, IC13 |
| 13 | HY2213-BB3A | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U24, U25, U26 |
| 13 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13 |
| 13 | SLS2302 | Package_TO_SOT_SMD:SOT-23 | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U21, U22, U23 |
| 12 | P75N02LD | Package_TO_SOT_SMD:TO-252-2 | Q28, Q29, Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39 |
| 2 | 10M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R88, R112 |
| 2 | 4mΩ | Resistor_SMD:R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R101, R102 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q27, Q40 |
| 1 | * | 99_others:sd_logo_front_copper_with_mask | * |
| 1 | 0.47uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C21 |
| 1 | B+ | SolderWirePad_1x01_SMD_5x5mm:SolderWirePad_1x01_SMD_5x5mm | H1 |
| 1 | B- | SolderWirePad_1x01_SMD_5x5mm:SolderWirePad_1x01_SMD_5x5mm | H2 |
| 1 | CONN_14 | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J1 |
| 1 | LOGO | 99_others:sd_logo_front_silkscreen | G*** |
| 1 | P+ | SolderWirePad_1x01_SMD_5x5mm:SolderWirePad_1x01_SMD_5x5mm | H4 |
| 1 | P- | SolderWirePad_1x01_SMD_5x5mm:SolderWirePad_1x01_SMD_5x5mm | H3 |
Similar boards
- 2 layers97.8 × 73.7 mm
Clock test breakout
Iver-Iscariot/TideWatchEink
E-ink display version of my tidal water wrist watch
228 parts - 4 layers100 × 80 mm
AuraForge-50X
RaviKachhwaha/AuraForge-50X
A 4-layer programmable PCB board audio platform featuring an ESP32 DSP core, 50Hz Wi-Fi CSI radar, 2x50W TPA3116D2 Class-D amp, hybrid dual-rail power (10A TPS61088 3.7V-to-12V boost & 12–21V DC jack), 3A USB-C fast…
83 parts - 2 layers95 × 60 mm
Callsystem
thomas1299/Wireless-call-system
Die Alarmauslösung auf beiden Geräten erfolgt innerhalb von 500 ms ab dem Berühren des Sensors durch die Lippen und die Reichweite der Funkverbindung beträgt mindestens 100 m im Freien.
59 partsGPL-3.0 - 4 layers56.6 × 69.4 mm
VariometerV2
oiver12/VariometerV2
Paragliding variometer: custom KiCad PCBs, ESP32 firmware, sensor fusion, e-ink UI, and desktop flight replay.
117 partsMIT - 2 layers151 × 118 mm
- 4 layers100 × 60 mm
WetterStationPCB
sebif2004/WetterStationPCB
Wetterstation controller (Akku+Buck-Boost-converter + ESP32/s3)
119 parts1 - 4 layers300 × 200 mm
Questions
How big is the Sd04 PCB?
It measures 99.8 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sd04 use?
254 parts, built around the DW01A-G, HY2213-BB3A, MMBT3906 and P75N02LDG-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sd04 KiCad files?
From the Ron-Z/PCB_SD04-PCM-DW01 repository on GitHub, at the commit this page was made from: the board is 705_PCB_SD04-PCM-DW01/191212_shark04_dw01/sd04.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sd04 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ron-Z before reusing the design.