2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59
2 layers43.8 × 69.3 mm
Hotendheater
sebastius/NuzzlerA hotend heater for Bambulabs X1C hotends
- Size
- 43.8 × 69.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 31
- Pads
- 63
- Tracks, vias
- 67, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Nov 2024
- Updated
- 29 Nov 2024
Overview
Hotendheater is an open-source printed circuit board by sebastius, from the sebastius/Nuzzler repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 43.8 × 69.3 mm with 16 parts on 31 nets, routed with 67 tracks and 2 vias.
It is built around the IRF540N. Its parts include 5 connectors, 3 resistors and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdNuzzler
A hotend heater for Bambulabs X1C hotends
This version is untested.
Designed with these parts on order:
- https://www.aliexpress.com/item/1005006322355552.html (display)
- https://www.aliexpress.com/item/1005007080333485.html (jst-xh, 2 pin)
- https://www.aliexpress.com/item/1005004337800850.html (jst-gh, 2pin)
- 1k 0805
- 100k 0805
- Arduino Nano
- https://www.aliexpress.com/item/1005006949630465.html (USB C Trigger board, 12v (in theory you could go 20V but the Arduino Nano vreg will burn...))
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4, H5, H6 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J5 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1 |
| 1 | Conn_01x02_Shielded | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J6 |
| 1 | Conn_01x08_Socket | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
Questions
How big is the Hotendheater PCB?
It measures 43.8 × 69.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hotendheater use?
16 parts, built around the IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hotendheater KiCad files?
From the sebastius/Nuzzler repository on GitHub, at the commit this page was made from: the board is hotendheater.kicad_pcb and its schematic hotendheater.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hotendheater design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers124.5 × 77.5 mm
- 2 layers55 × 90.8 mm
- 2 layers73.7 × 61 mm
- 2 layers
- 4 layers147.8 × 77 mm
2xBLDCPicoV3
AmericanRework/Pico-2x-BLDC
One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.
135 parts7 - 2 layers
PCB Layout
chgopireddy/Full-Bridge-Class-D-Audio-Amplifier
LTspice Model for Full Bridge Class D, Voltage Mode Control, Peak Current Mode Control
63 parts6 - 2 layers147.2 × 58.3 mm
Li IonBatteryProtection
cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
81 parts6MIT