

Narfkb2
6x3 split keyboard powered by rp2040-zero
- Size
- 302.4 × 99.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 120
- Nets
- 96
- Pads
- 606
- Tracks, vias
- 840, 92
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 May 2023
- Updated
- 11 May 2023
Overview
Narfkb2 is an open-source printed circuit board by sebastian-stumpf, from the sebastian-stumpf/narfkb2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 302.4 × 99.4 mm with 120 parts on 96 nets, routed with 840 tracks and 92 vias.
It is built around the RP2040-ZERO and 1N4148W. Its parts include 50 diodes, 50 switches, 2 ICs and 2 connectors. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
2README
README.mdnarfkb2

More pictures in the pictures directory.
Attention
I'm a hobbyist/amateur at best. So there may be things that aren't optimized. That being said I've had the files
in the gerbers/ directory manufactured at JLC with 1.6mm size and they work just fine with my fork of the qmk repository
directory. So if you decide to use this, then please be advised that I'm not providing any sort of liability and you should
exercise some caution.
BOM
| Quantity | Item | Comment |
|---|---|---|
| 2 | Waveshare RP2040-Zero | |
| 2 | IC-Sockets for MCU | Optional but recommended |
| 2 | TRRS Sockets | |
| 50 | 1N4148 SOD123 diodes | |
| 42 | MX Hotswap Sockets | |
| 2 | EC11 Encoders | |
| 6 | Omrom 6mm Tact switches | B3F-1002 |
| 42 | MX Switches + Keycaps | |
| 12 | M2 Screws, Nuts, Bolts and Spacers |
Firmware
See my fork of the qmk repository. Nothing special here. You can just copy the code over to your own repository.
Feedback
I'm always happy to hear your opinions about this and if you decide to build this board then please do send me a picture of it.
Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | 1N4148W | sepp:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +34 |
| 42 | MX_SW_HS | sepp:SW_MX_HS_1u | SW1, SW2, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW19, SW23, SW24, SW25, SW26, SW27 +26 |
| 12 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12 |
| 6 | actionswitch | sepp:actionswitch | SW20, SW21, SW22, SW39, SW40, SW41 |
| 4 | mousebites | sepp:breakaway-mousebites | H13, H14, H15, H16 |
| 2 | MJ-4PP-9 | sepp:MJ-4PP-9 | J1, J2 |
| 2 | RotaryEncoder_Switch | sepp:RotaryEncoder_EC11 | SW13, SW32 |
| 2 | rp2040-zero | sepp:rp2040-zero-tht | U1, U2 |
Similar boards
- 2 layers305.2 × 76.2 mm

- 2 layers258.2 × 96.8 mm

Narfkb
sebastian-stumpf/narfkb
rp2040 powered split keyboard with rotary encoders and 6mm tactile buttons
108 parts29MIT - 2 layers317.2 × 109.9 mm

- 2 layers245.3 × 78.6 mm

Sg48key2
sago35/keyboards
This repository was created to manage the circuitry and firmware for the keyboards I designed. The firmware is created using sago35/tinygo-keyboard.
158 parts22MIT - 2 layers76.1 × 116.7 mm

- 2 layers229.2 × 116.9 mm

- 2 layers141 × 22 mm

- 2 layers214.8 × 146.4 mm

Questions
How big is the Narfkb2 PCB?
It measures 302.4 × 99.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Narfkb2 use?
120 parts, built around the RP2040-ZERO and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Narfkb2 KiCad files?
From the sebastian-stumpf/narfkb2 repository on GitHub, at the commit this page was made from: the board is pcb/narfkb2.kicad_pcb and its schematic pcb/narfkb2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Narfkb2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).