Skip to the content
2 layers64.8 × 55.1 mmD1 cleared, the printed circuit board in 3D
Size
64.8 × 55.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
48
Nets
62
Pads
190
Tracks, vias
0, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 Apr 2026
Updated
16 Apr 2026

Overview

D1 cleared is an open-source printed circuit board by sean8845, from the sean8845/PCB_routing repository on GitHub. It is a 2-layer board of 64.8 × 55.1 mm with 48 parts on 62 nets.

It is built around the ATMEGA128RFA1-ZU and LM1117-3.3. Its parts include 17 capacitors, 6 resistors, 3 diodes, 2 ICs and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

PCB_routing

Basic Astar

Execution Workflow

The routing process is divided into two main stages: clearing the board and generating new routes.

1. Clear Existing Tracks (Rip-up)
  • Before running the routing algorithm, you must remove any existing tracks or vias to create a clean workspace.
  • Script: basic_Astar/ripup.py
  • Action: This script reads your original .kicad_pcb file, strips away all pre-existing routing data, and saves a clean version to be used as the input for the router.
2. Execute A* Routing Logic
  • Once the board is clear, you can run the pathfinding algorithm to connect the netlist.

  • Available Scripts:

    -- routing_4direction.py: Restricts routing to horizontal and vertical movements only. Only 2-Layers is allowed.

    -- routing_8direction.py: Allows diagonal movement for more efficient and flexible paths. Only 2-Layers is allowed.

    -- routing_8direction_multi_layer.py: Allows multi-layers.

  • Action: The script calculates the shortest path between pins based on grid coordinates and writes the new track data back into a KiCad-compatible file.

Parts

48
QtyValueFootprintReferences
51uF0402-CAPC1, C2, C3, C4, C12
412pF0402-CAPC5, C6, C7, C8
31X02_NO_SILKJP1, JP5, JP7
2SJ_2S-TRACESJ1, SJ2
20.1uF0402-CAPC13, C15
210uFEIA3216C10, C14
23300402-RESR5, R6
2FIDUCIALUFIDUCIALMICRO-FIDUCIALFID1, FID2
2GREENLED-0603LED2, LED3
2JUMP0402-CAPC16, C17
1SCREWTERMINAL-3.5MM-2-NSJP8
1SWITCH-SPST-SMD-AS2
1JST-2-PTHJP6
11X04_NO_SILKJP2
11X06_NSJP3
1TACTILE_SWITCH_SMDS1
10.75pF0402-CAPC9
110k0402-RESR1
116MHzCRYSTAL-SMD-5X3Y1
11k0402-RESR2
122pF0402-CAPC11
12400402-RESR3
132.768kHzCRYSTAL-32KHZ-SMDY2
13900402-RESR4
1748421245BALUNB1
1ANTENNA2SMD5ANTENNA-CHIP5A1
1ATMEGA128RFA1QFN-64U1
1FTDIFTDI_BASICJP9
1ISP2X3-NSJ1
1LM1117SOT223U2
1POWER_JACKPTH_LOCKPOWER_JACK_PTH_LOCKJ3
1REDLED-0603LED1

Similar boards

  • 2 layers95.9 × 90.2 mmRfAtmega128-append, the printed circuit board in 3D

    RfAtmega128-append

    borisov-r/rfAtmega128

    Arduino with ATmega128RFa1, ftdi, and RPSMA connector

    4 parts2
  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers52.5 × 36.6 mmESP8266-WebRadio, the printed circuit board in 3D

    ESP8266-WebRadio

    karawin/Ka-Radio

    A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

    52 parts453
  • 2 layers95.2 × 57.2 mmDomesdayDuplicator, the printed circuit board in 3D

    DomesdayDuplicator

    Domesday86/DomesdayDuplicator

    High-speed LaserDisc RF sampler

    66 parts325GPL-3.0
  • 2 layers189.5 × 204.9 mmSmartSpin2k Panelized, the printed circuit board in 3D

    SmartSpin2k Panelized

    doudar/SmartSpin2k

    Transform your spin bike into a Smart Trainer!

    749 parts292GPL-2.0
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 4 layers113.5 × 105.5 mmMultistepper, the printed circuit board in 3D

    Multistepper

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    243 parts208
  • 2 layers275 × 103 mmKeebee, the printed circuit board in 3D

    Keebee

    blakesmith/embedded

    Blake's embedded projects

    159 parts167

Questions

How big is the D1 cleared PCB?

It measures 64.8 × 55.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the D1 cleared use?

48 parts, built around the ATMEGA128RFA1-ZU and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the D1 cleared KiCad files?

From the sean8845/PCB_routing repository on GitHub, at the commit this page was made from: the board is basic_Astar/data/d1_cleared.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the D1 cleared design in my own project?

Its repository states no licence, so its author keeps all rights: ask sean8845 before reusing the design.