Skip to the content
2 layers95.9 × 90.2 mmRfAtmega128-append, the printed circuit board in 3D

RfAtmega128-append

borisov-r/rfAtmega1282

Arduino with ATmega128RFa1, ftdi, and RPSMA connector

Size
95.9 × 90.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
49
Pads
90
Tracks, vias
0, 4
Routed
Not yet
KiCad
KiCad 3
Created
2 Apr 2012
Updated
1 Sep 2013

Overview

RfAtmega128-append is an open-source printed circuit board by borisov-r, from the borisov-r/rfAtmega128 repository on GitHub. It is a 2-layer board of 95.9 × 90.2 mm with 4 parts on 49 nets.

It is built around the ATMEGA128RFA1-ZU and 2450FB15L0001E. Its parts include 3 ICs and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README

Simple PCB with ATmega128RFa1 processor and usb. Main application of this board will be in our RepRap projects.

This work is licensed under the GNU GPL v3 or (at the user's discretion) any later version. Software that will be used in this project is completely free and should be licensed under GPL v2 or later.

As a pins and code reference I'll use zigduino project: http://www.logos-electro.com/zigduino/

============================================================================

Components:

  1. ATmega128RFa1 -> 64 pins QFN @ 3.3 V
  2. FT232RL -> 28 pins @ 3.3 V
  3. BA033 -> 5 pins @ -0.3 - 35 V
  4. 2450FB15L0001 -> 6 pins - RF balun
  5. MCP809T-270I/TT -> added to RESET pin for programming
  6. tunning capacitors -> 22 pF, 0.5 - 1.5 pF, 0603
  7. RPSMA connector or PCB antenna
  8. ICSP connector

============================================================================

Basic processes of the foundries should be examined and compared, so a simplified trasistor model could be generated for more universal design.

Other option is a model to be generated according the needs and after that the most suitable foundry should be chosen.

============================================================================

Schematic and layout design will be done using KiCAD. Eventually a 3D models of the components will be added to the PCB.

============================================================================

Additional software for testing should be implemented.

Main RF libraries: http://www.nongnu.org/uracoli/ http://freaklabs.org/index.php/chibiArduino.html http://www.contiki-os.org https://github.com/erictj/uracoli/tree/master/wibo https://github.com/maniacbug/contiki-avr-zigduino http://code.google.com/p/looci/wiki/GettingStartedContikiAVRRaven

Parts

4
QtyValueFootprintReferences
12450FB15L00012450FB15L0001U8
1ATMEGA128RFA1atmega128rfa1U6
1Q16.000crystal_xg6x3p5U3
1RP-SMArp-smaX1

Similar boards

  • 2 layers64.8 × 55.1 mmD1 cleared, the printed circuit board in 3D

    D1 cleared

    sean8845/PCB_routing

    48 parts
  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

How big is the RfAtmega128-append PCB?

It measures 95.9 × 90.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RfAtmega128-append use?

4 parts, built around the ATMEGA128RFA1-ZU and 2450FB15L0001E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RfAtmega128-append KiCad files?

From the borisov-r/rfAtmega128 repository on GitHub, at the commit this page was made from: the board is hardware/rev.A/rfAtmega128-append.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the RfAtmega128-append design in my own project?

Its repository states no licence, so its author keeps all rights: ask borisov-r before reusing the design.