
RfAtmega128-append
borisov-r/rfAtmega128
Arduino with ATmega128RFa1, ftdi, and RPSMA connector

D1 cleared is an open-source printed circuit board by sean8845, from the sean8845/PCB_routing repository on GitHub. It is a 2-layer board of 64.8 × 55.1 mm with 48 parts on 62 nets.
It is built around the ATMEGA128RFA1-ZU and LM1117-3.3. Its parts include 17 capacitors, 6 resistors, 3 diodes, 2 ICs and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
The routing process is divided into two main stages: clearing the board and generating new routes.
Once the board is clear, you can run the pathfinding algorithm to connect the netlist.
Available Scripts:
-- routing_4direction.py: Restricts routing to horizontal and vertical movements only. Only 2-Layers is allowed.
-- routing_8direction.py: Allows diagonal movement for more efficient and flexible paths. Only 2-Layers is allowed.
-- routing_8direction_multi_layer.py: Allows multi-layers.
Action: The script calculates the shortest path between pins based on grid coordinates and writes the new track data back into a KiCad-compatible file.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1uF | 0402-CAP | C1, C2, C3, C4, C12 |
| 4 | 12pF | 0402-CAP | C5, C6, C7, C8 |
| 3 | 1X02_NO_SILK | JP1, JP5, JP7 | |
| 2 | SJ_2S-TRACE | SJ1, SJ2 | |
| 2 | 0.1uF | 0402-CAP | C13, C15 |
| 2 | 10uF | EIA3216 | C10, C14 |
| 2 | 330 | 0402-RES | R5, R6 |
| 2 | FIDUCIALUFIDUCIAL | MICRO-FIDUCIAL | FID1, FID2 |
| 2 | GREEN | LED-0603 | LED2, LED3 |
| 2 | JUMP | 0402-CAP | C16, C17 |
| 1 | SCREWTERMINAL-3.5MM-2-NS | JP8 | |
| 1 | SWITCH-SPST-SMD-A | S2 | |
| 1 | JST-2-PTH | JP6 | |
| 1 | 1X04_NO_SILK | JP2 | |
| 1 | 1X06_NS | JP3 | |
| 1 | TACTILE_SWITCH_SMD | S1 | |
| 1 | 0.75pF | 0402-CAP | C9 |
| 1 | 10k | 0402-RES | R1 |
| 1 | 16MHz | CRYSTAL-SMD-5X3 | Y1 |
| 1 | 1k | 0402-RES | R2 |
| 1 | 22pF | 0402-CAP | C11 |
| 1 | 240 | 0402-RES | R3 |
| 1 | 32.768kHz | CRYSTAL-32KHZ-SMD | Y2 |
| 1 | 390 | 0402-RES | R4 |
| 1 | 748421245 | BALUN | B1 |
| 1 | ANTENNA2SMD5 | ANTENNA-CHIP5 | A1 |
| 1 | ATMEGA128RFA1 | QFN-64 | U1 |
| 1 | FTDI | FTDI_BASIC | JP9 |
| 1 | ISP | 2X3-NS | J1 |
| 1 | LM1117 | SOT223 | U2 |
| 1 | POWER_JACKPTH_LOCK | POWER_JACK_PTH_LOCK | J3 |
| 1 | RED | LED-0603 | LED1 |

borisov-r/rfAtmega128
Arduino with ATmega128RFa1, ftdi, and RPSMA connector

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix


doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!

plinkysynth/plinky_public
a public release of the plinky sw and hw

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32

It measures 64.8 × 55.1 mm and has 2 copper layers, 1.6 mm thick.
48 parts, built around the ATMEGA128RFA1-ZU and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sean8845/PCB_routing repository on GitHub, at the commit this page was made from: the board is basic_Astar/data/d1_cleared.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sean8845 before reusing the design.