
Maglev26
Hansolini/Take-home-Maglev-lab
A small lab for students in control engineering to learn control topics at home!

Einfache glasbausteinlampe mit steuerbaren leds und einem 3D-gedrucktem Gehäuse
Glasbaustein is an open-source printed circuit board by Schappie321, from the Schappie321/Glausbaustein repository on GitHub. It is a 2-layer board of 144.5 × 70 mm with 65 parts on 35 nets, routed with 284 tracks and 27 vias.
It is built around the PJ-036AH-SMT-TR. Its parts include 39 diodes, 6 resistors, 6 connectors, 3 capacitors and 3 ICs.
Einfache glasbausteinlampe mit steuerbaren leds und einem 3D-gedrucktem Gehäuse
| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | SMDLED_3528 | LED_SMD:LED_PLCC_2835_Handsoldering | D1, D2, D10, D11, D12, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26 +20 |
| 8 | ~ | TestPoint:TestPoint_Pad_D1.5mm | +12V1, GND1, LED_RED1+1, LED_WW1, LED_WW2, PWM_RED1, PWM_WW1, PWM_WW2 |
| 3 | 10n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3 |
| 3 | BCR430UW6-7 | Library:BCR430UW6-7_DIO | U1, U2, U3 |
| 3 | BZX84Cxx | Package_TO_SOT_SMD:SOT-23 | D13, D14, D15 |
| 3 | Mode | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4, J5 |
| 2 | 3K | Resistor_SMD:R_0603_1608Metric | R2A1, R3A1 |
| 2 | 4K7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R2B1, R3B1 |
| 1 | 0 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R1B1 |
| 1 | 10K | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R1A1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | PJ-036AH-SMT-TR | Library:CONN3_PJ-036AH_CUD | J1 |
| 1 | Power Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |

Hansolini/Take-home-Maglev-lab
A small lab for students in control engineering to learn control topics at home!

o7-machinehum/Hydroponic
Please find the electronics files in the ee folder, all pcb design is done with the open source software KiCad. Is uses an STM32 as the main controller, and an ST L6470 moter driver for the stepper motor.



cadenhillis/nixie-tube-clock
custom high-voltage boost power supply and nessesary drivers to control IN-12A and IN13 nixies with an adafruit itsybitsy nRF32



It measures 144.5 × 70 mm and has 2 copper layers, 1.6 mm thick.
65 parts, built around the PJ-036AH-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Schappie321/Glausbaustein repository on GitHub, at the commit this page was made from: the board is electronics/Glasbaustein.kicad_pcb and its schematic electronics/Glasbaustein.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Schappie321 before reusing the design.