2 layers
2 layers200 × 200 mm
FULL BOARD
AndyPpohl/PCB-Conundrum-Crack1- Size
- 200 × 200 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 128
- Nets
- 195
- Pads
- 529
- Tracks, vias
- 874, 86
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Sep 2024
- Updated
- 6 Nov 2024
Overview
FULL BOARD is an open-source printed circuit board by AndyPpohl, from the AndyPpohl/PCB-Conundrum-Crack repository on GitHub. It is a 2-layer board of 200 × 200 mm with 128 parts on 195 nets, routed with 874 tracks and 86 vias.
It is built around the TAS5760LDAP, MEM2080-00-128-00-A and B2B-PH-K-S, with the PJ-036AH-SMT-TR and PTS645SK50SMTR92LFS among its other parts. Its parts include 34 capacitors, 33 diodes, 30 resistors, 21 switches and 6 connectors. It belongs with the STM32 boards of this library.
Main components
5
TAS5760LDAP
HTSSOP-32-EP-6.1mm-25℃~+85℃ 0.09% 1-Channel、2-Channel 100dB 4.5V~16.5V Class D Configurable output topology、Built-in audio processing HTSSOP-32-EP-6.1mm Audio Amplifiers ROHSTexas InstrumentsAudio Amplifiers
MEM2080-00-128-00-A
SMD-25℃~+85℃ 1.28mm 12V Connector and Ejector MicroSD Card (TF Card) Push-Push SMD SD Card / Memory Card Connector ROHSGlobal Connector Technology (GCT)SD Card / Memory Card Connector
B2B-PH-K-S
插件,P=2mmUncategorisedJST
PJ-036AH-SMT-TR
SMD-25℃~+85℃ 11mm 14.5mm 15.2mm 24V 2mm 5A 6.3mm DC Power Jack Surface Mount, Right Angle SMD DC Power Connectors ROHSCUIDC Power Connectors
PTS645SK50SMTR92LFS
SMD-4P,6x6mm-40℃~+85℃ 1.55mm 12V 2.6N 50mA 6mm 6mm Gull Wing Round Button SPST Surface Mount,Vertical SMD-4P,6x6mm Tactile Switches ROHSC&KTactile Switches
Parts
128| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | Diode | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4 |
| 20 | Keyswitch | ScottoKeebs_MX:MX_PCB_1.00u | S1, S2, S3, S4, S5, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20 +4 |
| 13 | 100 | Resistor_SMD:R_0805_2012Metric | R14, R15, R17, R19, R21, R22, R23, R24, R25, R26, R27, R28, R29 |
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5, C6, C8, C10, C11, C12, C14, C16, C18 |
| 9 | BZX84Cxx | Package_TO_SOT_SMD:SOT-23 | D22, D26, D27, D28, D29, D30, D31, D32, D33 |
| 6 | 1uF | Capacitor_SMD:C_0805_2012Metric | C19, C21, C22, C23, C24, C26 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R13, R30 |
| 5 | 1k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R7 |
| 4 | .22uF | Capacitor_SMD:C_0805_2012Metric | C27, C28, C29, C30 |
| 4 | 47nF | Capacitor_SMD:C_0805_2012Metric | C32, C34, C35, C36 |
| 4 | 68 | Resistor_SMD:R_0805_2012Metric | R12, R16, R18, R20 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D21, D23, D24, D25 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C25, C31, C33 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C2, C7 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C4, C15 |
| 2 | 26pF | Capacitor_SMD:C_0805_2012Metric | C9, C13 |
| 2 | B2B-PH-K-S | Audio Connector 2:CON_530470210_MOL | J3, J6 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 47 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 5019514000 | Final Ribbon Connector:GCT_FFC3B07-40-T | J4 |
| 1 | 61201021621 | Debugger:CONN_61201021621_WRE | J5 |
| 1 | ABLS7M2-16.000MHZ-D-2Y-T | crystal osc:XTAL_ABLS7M2_ABR | Y1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | MEM2080-00-128-00-A | Second SD card:MEM20800012800A | J2 |
| 1 | PJ-036AH-SMT-TR | power jack:CONN3_PJ-036AH_CUD | J1 |
| 1 | PTS645SK50SMTR92LFS | Reset Switch:SW_PTS645SK50SMTR92LFS | SW1 |
| 1 | STM32H743VITx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U2 |
| 1 | TAS5760LDAP | Audio Amp:DAP0032A_M | IC1 |
More from AndyPpohl/PCB-Conundrum-Crack
1Similar boards
- 4 layers36 × 60 mm
- 4 layers52.7 × 60.9 mm
- 4 layers70 × 110 mm
- 2 layers42 × 42 mm
LoadcellSensor
jujojujo2003/Ender-3-3DPrinter-Load-Cell-Bed-Leveling-Sensor
This is a Load Cell based bed leveling sensor based on the RP2040 and TI ADS1235 ADC that should mount onto any vertical MGN12H gantry. My printer is an Ender 3 with a bunch of linear rail mods.
56 parts5MIT - 2 layers83.6 × 107.3 mm
Shield stm2025
Rami-Troudi/Electrique-Eurobot-IEEE-INSAT-2026
Repo for my electrical work for the Eurobot competition
66 parts1 - 4 layers46 × 30 mm
Can distance sensor
nlbutts/can_distance_sensor
This is a small CAN based Time-of-Flight (TOF) sensor. It determines the distance to an object and sends the resulting message on the CAN bus.
74 partsMIT - 4 layers100 × 50 mm
- 2 layers
Maglev26
Hansolini/Take-home-Maglev-lab
A small lab for students in control engineering to learn control topics at home!
60 parts15MIT
Questions
How big is the FULL BOARD PCB?
It measures 200 × 200 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FULL BOARD use?
128 parts, built around the TAS5760LDAP, MEM2080-00-128-00-A, B2B-PH-K-S and PJ-036AH-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FULL BOARD KiCad files?
From the AndyPpohl/PCB-Conundrum-Crack repository on GitHub, at the commit this page was made from: the board is FULL BOARD/FULL BOARD/FULL BOARD.kicad_pcb and its schematic FULL BOARD/FULL BOARD/FULL BOARD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FULL BOARD design in my own project?
Its repository states no licence, so its author keeps all rights: ask AndyPpohl before reusing the design.