
ESP32 Interface1
Saroja-J/ESP32-Board-
Custom ESP32-WROOM-32D PCB designed in KiCad with USB-UART,I2C,VSPI, and Sensor Interfaces.

Custom ESP32-WROOM-32D PCB designed in KiCad with USB-UART,I2C,VSPI, and Sensor Interfaces.
ESP32 Interface is an open-source printed circuit board by Saroja-J, from the Saroja-J/ESP32-Board- repository on GitHub. It is a 2-layer board of 109 × 78.5 mm with 62 parts on 71 nets, routed with 508 tracks and 55 vias.
It is built around the CH340C, ESP32-WROOM-32D and LM2596S-3.3, with the MMBT2222A and SM518 among its other parts. Its parts include 19 resistors, 15 connectors, 12 capacitors, 5 diodes and 3 ICs. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.
A custom ESP32-WROOM-32D Development Board designed in KiCad for IoT and embedded applications. The board integrates USB-to-UART programming, power management, automatic reset and boot circuitry, and GPIO expansion, providing a compact platform for developing Wi-Fi and Bluetooth-enabled systems.
This project is based on the ESP32-WROOM-32D, a Wi-Fi and Bluetooth-enabled microcontroller module from Espressif. The board includes a CH340C USB-to-UART interface, LM2596 buck converter, automatic reset and boot circuitry, GPIO headers, and supporting passive components. It supports UART, SPI, I²C, PWM, ADC, and GPIO interfaces, making it suitable for IoT, embedded systems, automation, and rapid prototyping.
Add your PCB images below.
| 2-Layer PCB | 4-Layer PCB |
|---|---|
| Component | Description |
|---|---|
| ESP32-WROOM-32D | Main Wi-Fi & Bluetooth microcontroller |
| CH340C | USB-to-UART programming interface |
| LM2596 | Buck converter for power regulation |
| USB Connector | Power input and programming |
| NPN Transistors | Automatic Reset & Boot switching |
| Push Buttons | Manual Reset & Boot |
| Capacitors | Power filtering and decoupling |
| Resistors | Pull-up, pull-down and current limiting |
| GPIO Headers | External peripheral connections |
This design does not include an ESD protection diode on the 3.3V supply near the ESP32-WROOM-32D, although it is recommended in the ESP32 Hardware Design Guidelines. It can be added in future revisions to improve protection against electrostatic discharge (ESD).
This project is shared for educational and learning purposes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R7, R8, R9, R10, R15, R17, R18, R19 |
| 6 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R11, R12, R13, R14 |
| 6 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C6, C7, C8, C9 |
| 4 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5, J9, J10, J11 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C10, C11 |
| 2 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Omron_B3FS | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-100x | SW1, SW2 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 220uF/16V | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C3 |
| 1 | 33uH | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 680/35V | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | Conn_01x02_Socket | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J14 |
| 1 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | Conn_01x16_Pin | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J13 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32D | U3 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J3 |
| 1 | LM2596S-3.3 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_148-149_Single_Horizontal | RV1 |
| 1 | SM518 | Diode_THT:D_T-1_P2.54mm_Vertical_AnodeUp | D3 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-AB_Molex_47590-0001 | J2 |
| 1 | YELLOW | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
The 60 most common of 62 parts.

Saroja-J/ESP32-Board-
Custom ESP32-WROOM-32D PCB designed in KiCad with USB-UART,I2C,VSPI, and Sensor Interfaces.


RatnakarSahooVSSUT/ESP32-Custom-PCB
Custom ESP32 development board designed in KiCad


yogesh8441/ESP32-CUSTOM-DEVELOPMENT-BOARD
A custom-designed ESP32-WROOM-32D Development Board developed using KiCad 10. This project demonstrates the complete PCB design workflow, including schematic design, PCB layout, routing, ground plane implementation…

jliusgustalvoo/making-pcb-with-esp32-s3-with-sensor-actuator-i2c-pin
making pcb with esp32-s3 with sensor,actuator,i2c pin for college task

Khoapham2004/ESP32-to-ESP-NOW-Control
The second repository contains the hardware design of the robot. It is mostly based on the 2025 version, with updated sensors, the BTS signal removed from the previous design, and a PCB that primarily uses SMD…


lukasprojects/esp32-dalitester
Small ESP32 DALI tester for commissioning and maintaining light installations via the DALI bus
It measures 109 × 78.5 mm and has 2 copper layers, 1.6 mm thick.
62 parts, built around the CH340C, ESP32-WROOM-32D, LM2596S-3.3 and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Saroja-J/ESP32-Board- repository on GitHub, at the commit this page was made from: the board is 2_layer PCB/ESP32 Interface.kicad_pcb and its schematic 2_layer PCB/ESP32 Interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Saroja-J before reusing the design.