Skip to the content
2 layers100 × 100 mmEv smart, the printed circuit board in 3D

The second repository contains the hardware design of the robot. It is mostly based on the 2025 version, with updated sensors, the BTS signal removed from the previous design, and a PCB that primarily uses SMD…

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
96
Nets
102
Pads
354
Tracks, vias
611, 215
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Mar 2025
Updated
23 Jul 2026

Overview

Ev smart is an open-source printed circuit board by Khoapham2004, from the Khoapham2004/ESP32-to-ESP-NOW-Control repository on GitHub. It is a 2-layer board of 100 × 100 mm with 96 parts on 102 nets, routed with 611 tracks and 215 vias.

It is built around the CH340C, ESP32-WROOM-32D and LM2596S-5.0, with the LM2596S-3.3, AMS1117-3.3 and BC337 among its other parts. Its parts include 30 resistors, 14 capacitors, 14 ICs, 11 connectors and 9 diodes. It belongs with the ESP32 boards of this library.

Main components

9

README

README.md

The second repository contains the hardware design of the robot. It is mostly based on the 2025 version, with updated sensors, the BTS signal removed from the previous design, and a PCB that primarily uses SMD components for improved compactness and reliability. image image image image The following slide presents the control board developed for the 2026 project. image image image image

Parts

96
QtyValueFootprintReferences
221kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR11, R12, R13, R14, R15, R16, R17, R18, R21, R23, R24, R25, R26, R27, R28, R29 +6
5220uF/50VCapacitor_SMD:CP_Elec_10x10.5C2, C5, C13, C15, C16
5Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2, J18, J19, J20, J21
5LEDLED_SMD:LED_0805_2012MetricD4, D5, D13, D14, D22
4BC337Package_TO_SOT_THT:TO-92_InlineQ1, Q2, Q3, Q4
4OPTOIVSFootprint:OptoIsolation-EL357N-GU8, U9, U10, U11
4SS54-HFSS54-HF:DIOM5025X220ND1, D2, D6, D12
3470uF/50VCapacitor_SMD:CP_Elec_10x10.5C1, C6, C12
3CDRH105RNP-4R7NCCDRH105RNP-4R7NC:IND_CDRH105RNP-4R7NCL1, L2, L3
3N_MosfetPackage_TO_SOT_SMD:SOT-23-3Q5, Q6, Q12
2100uFCapacitor_SMD:CP_Elec_6.3x5.4C22, C24
210kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR20, R31
212kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR32, R35
21uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC21, C23
2330Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
2470Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR33, R36
2BC847Package_TO_SOT_SMD:SOT-23Q8, Q9
2LM2596S-5Package_TO_SOT_SMD:TO-263-5_TabPin3U2, U19
2SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxGSW1, SW3
2Screw_Terminal_01x06Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_6-G-5,08_1x06_P5.08mm_HorizontalJ4, J28
1105Capacitor_SMD:C_0805_2012MetricC14
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC19
13362P-1-105LF3362P-1-105LF:TRIM_3362P-1-105LFVR1
14527LIB:FUSE_4527F1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U15
1CH340CPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU17
1Conn_01x04B4B-XH-A_LF__SN_:JST_B4B-XH-A_LF__SN_J3
1Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ5
1ESP32-WROOM-32DRF_Module:ESP32-WROOM-32DU14
1ICM7555xPPackage_DIP:DIP-8_W7.62mmU5
1LM2596S-3.3Package_TO_SOT_SMD:TO-263-5_TabPin3U3
1LM7812_TO220Package_TO_SOT_THT:TO-220-3_VerticalU4
1LOGOLOGO_BMT:BMTG***
1Optocoupler_DC_PhotoNPN_AKECIVSFootprint:OptoIsolation-EL357N-GU6
1SW_DIP_x04Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mmTEST_DIP1
1USB_AConnector_USB:USB_A_Stewart_SS-52100-001_HorizontalJ8
1USB_B_MicroConnector_USB:USB_Micro-B_Molex-105017-0001J1
1~GY-521:ICMU12

More from Khoapham2004/ESP32-to-ESP-NOW-Control

3
  • 2 layers144.1 × 98.5 mmControl PCB 2026, the printed circuit board in 3D

    Control PCB 2026

    Khoapham2004/ESP32-to-ESP-NOW-Control

    The second repository contains the hardware design of the robot. It is mostly based on the 2025 version, with updated sensors, the BTS signal removed from the previous design, and a PCB that primarily uses SMD…

    71 parts
  • 2 layers63.9 × 167.6 mmESP32-to ESP NOW Control, the printed circuit board in 3D

    ESP32-to ESP NOW Control

    Khoapham2004/ESP32-to-ESP-NOW-Control

    The second repository contains the hardware design of the robot. It is mostly based on the 2025 version, with updated sensors, the BTS signal removed from the previous design, and a PCB that primarily uses SMD…

    42 parts
  • 2 layers117.7 × 76.5 mmControl, the printed circuit board in 3D

    Control

    Khoapham2004/ESP32-to-ESP-NOW-Control

    The second repository contains the hardware design of the robot. It is mostly based on the 2025 version, with updated sensors, the BTS signal removed from the previous design, and a PCB that primarily uses SMD…

    21 parts

Similar boards

  • 4 layers81 × 53 mmPratham, the printed circuit board in 3D

    Pratham

    PeriwalPratham/FlightController

    A basic PCB design which contains all components for a solo yet affordable basic drone controller

    102 partsMIT
  • 2 layers67.3 × 99.7 mmSensor, the printed circuit board in 3D

    Sensor

    oakayasaroglu/esp32d_i2c

    esp32d based i2c pcb

    40 parts1
  • 2 layers84.3 × 57.5 mmATM90E36A V1, the printed circuit board in 3D

    ATM90E36A V1

    ClaudioSeda/ATM90EEnergy

    Atm EnergyMeter

    80 parts
  • 2 layers100 × 100 mmTemp pro, the printed circuit board in 3D

    Temp pro

    CrafterSteve/ESP32_Temp_Con

    An temperture control device, based on ESP32. With custom PCB board, it can fit an ESP32-DevKit as controller, DAC and ADC is done on board, as well as, a 5 to +-12v power supply..

    134 parts
  • 2 layers114.2 × 97.5 mmPlantMonitor v102, the printed circuit board in 3D

    PlantMonitor v102

    MathewNhari/KiCad

    Schematics for the plant monitoring systems

    51 parts
  • 2 layers109 × 78.5 mmESP32 Interface, the printed circuit board in 3D

    ESP32 Interface

    Saroja-J/ESP32-Board-

    Custom ESP32-WROOM-32D PCB designed in KiCad with USB-UART,I2C,VSPI, and Sensor Interfaces.

    62 parts1
  • 2 layers65 × 86 mmPcb KE 2 JULIUS, the printed circuit board in 3D

    Pcb KE 2 JULIUS

    jliusgustalvoo/making-pcb-with-esp32-s3-with-sensor-actuator-i2c-pin

    making pcb with esp32-s3 with sensor,actuator,i2c pin for college task

    78 parts
  • 2 layers100.8 × 68.8 mmESP32 Design, the printed circuit board in 3D

    ESP32 Design

    More414/PCB-designing

    73 parts

Questions

How big is the Ev smart PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ev smart use?

96 parts, built around the CH340C, ESP32-WROOM-32D, LM2596S-5.0 and LM2596S-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ev smart KiCad files?

From the Khoapham2004/ESP32-to-ESP-NOW-Control repository on GitHub, at the commit this page was made from: the board is PCB_EV2026/ev_smart.kicad_pcb and its schematic Circuit/RX.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ev smart design in my own project?

Its repository states no licence, so its author keeps all rights: ask Khoapham2004 before reusing the design.