Skip to the content
2 layers131.3 × 77.3 mmESP32 project, the printed circuit board in 3D

Custom ESP32 development board designed in KiCad

Size
131.3 × 77.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
70
Nets
64
Pads
301
Tracks, vias
1,189, 176
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Sep 2026
Updated
6 Sep 2026

Overview

ESP32 project is an open-source printed circuit board by RatnakarSahooVSSUT, from the RatnakarSahooVSSUT/ESP32-Custom-PCB repository on GitHub. It is a 2-layer board of 131.3 × 77.3 mm with 70 parts on 64 nets, routed with 1,189 tracks and 176 vias.

It is built around the CH340C, ESP32-WROOM-32D and LM2596S-5.0, with the HDSP-7403 and SM518 among its other parts. Its parts include 21 capacitors, 19 connectors, 18 resistors, 5 diodes and 4 ICs. It belongs with the ESP32 boards of this library.

Main components

5

README

README.md

ESP32-Custom-PCB

Custom ESP32 development board designed in KiCad

Parts

70
QtyValueFootprintReferences
21CCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21 +5
1610kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R6, R7, R8, R9, R10, R11, R14, R15, R16, R17, R18, R19, R20
6Conn_01x04_PinConnector:FanPinHeader_1x04_P2.54mm_VerticalJ5, J7, J8, J9, J10, J11
4Conn_01x08_PinConnector_Molex:Molex_SL_171971-0008_1x08_P2.54mm_VerticalJ12, J13, J14, J15
24.7KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR12, R13
2Conn_01x02_SocketConnector_Molex:Molex_SL_171971-0002_1x02_P2.54mm_VerticalJ4, J19
2Conn_01x03_PinConnector:FanPinHeader_1x03_P2.54mm_VerticalJ6, J16
1CH340CPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU3
1Conn_01x02_PinConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ18
1Conn_01x16_PinConnector_Molex:Molex_SL_171971-0016_1x16_P2.54mm_VerticalJ17
1Crystal_GND24Crystal:Crystal_SMD_7050-4Pin_7.0x5.0mmY2
1ESP32-WROOM-32DRF_Module:ESP32-WROOM-32DU2
1GREENLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD4
1HDSP-7403Display_7Segment:HDSP-7401U4
1Jack-DCConnector_BarrelJack:BarrelJack_SwitchcraftConxall_RAPC10U_HorizontalJ2
1LInductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolderL1
1LM2596S-5Package_TO_SOT_SMD:TO-263-5_TabPin3U1
1PURPLELED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD5
1REDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD2
1R_PotentiometerPotentiometer_THT:Potentiometer_Vishay_148-149_Single_HorizontalRV1
1SM518Diode_SMD:D_MELFD1
1Screw_Terminal_01x02TerminalBlock_CUI:TerminalBlock_CUI_TB007-508-02_1x02_P5.08mm_HorizontalJ3
1USB_B_MicroConnector_USB:USB_Micro-AB_Molex_47590-0001J1
1YELLOWLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD3

Similar boards

  • 2 layers124.5 × 62.5 mmProject 3, the printed circuit board in 3D

    Project 3

    Shourya-Basu/PCB-Design_Custom_ESP32_V1

    Design 2-Layer Custom ESP 32 PCB

    71 parts
  • 2 layers118.4 × 61.2 mmESP32 Project, the printed circuit board in 3D

    ESP32 Project

    yogesh8441/ESP32-CUSTOM-DEVELOPMENT-BOARD

    A custom-designed ESP32-WROOM-32D Development Board developed using KiCad 10. This project demonstrates the complete PCB design workflow, including schematic design, PCB layout, routing, ground plane implementation…

    63 parts
  • 2 layers100.8 × 68.8 mmESP32 Design, the printed circuit board in 3D

    ESP32 Design

    More414/PCB-designing

    73 parts
  • 2 layers109 × 78.5 mmESP32 Interface, the printed circuit board in 3D

    ESP32 Interface

    Saroja-J/ESP32-Board-

    Custom ESP32-WROOM-32D PCB designed in KiCad with USB-UART,I2C,VSPI, and Sensor Interfaces.

    62 parts1
  • 2 layers100 × 100 mmEv smart, the printed circuit board in 3D

    Ev smart

    Khoapham2004/ESP32-to-ESP-NOW-Control

    The second repository contains the hardware design of the robot. It is mostly based on the 2025 version, with updated sensors, the BTS signal removed from the previous design, and a PCB that primarily uses SMD…

    96 parts
  • 2 layers108.7 × 45.8 mmEsp32, the printed circuit board in 3D

    Esp32

    Nirajkeste/ESP32_PCB

    58 parts
  • 2 layers82 × 84 mmDigitalTimer, the printed circuit board in 3D

    DigitalTimer

    Bican-Valeriu-Cristian/DigitalTimer

    The project involves a digital timer that counts up to one minute. Each counter's 4-bit output is fed into a binary-to-7-segment decoder, enabling number display on 7-segment displays.

    38 parts1MIT
  • 2 layers117.5 × 87.5 mmSeminraski rad, the printed circuit board in 3D

    Seminraski rad

    MartiniGitGub/Upravljanje-ku-anskih-tro-ila-

    Upravljanje kućanskim trošilima. Izrada PCB pločice koja obuhvaća sastav kućne automatizacije.

    73 parts

Questions

How big is the ESP32 project PCB?

It measures 131.3 × 77.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32 project use?

70 parts, built around the CH340C, ESP32-WROOM-32D, LM2596S-5.0 and HDSP-7403. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32 project KiCad files?

From the RatnakarSahooVSSUT/ESP32-Custom-PCB repository on GitHub, at the commit this page was made from: the board is ESP32_project.kicad_pcb and its schematic ESP32_project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32 project design in my own project?

Its repository states no licence, so its author keeps all rights: ask RatnakarSahooVSSUT before reusing the design.