Skip to the content
2 layers79.5 × 64.4 mmGBAHD Shield, the printed circuit board in 3D

Shield for the Spartan Edge board to output HDMI for the Game Boy Advance

Size
79.5 × 64.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
70
Nets
147
Pads
417
Tracks, vias
752, 115
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
21 Jan 2021
Updated
9 Jun 2021

Overview

GBAHD Shield is an open-source printed circuit board by sanchezand, from the sanchezand/GBAHD-Shield repository on GitHub. It is a 2-layer board of 79.5 × 64.4 mm with 70 parts on 147 nets, routed with 752 tracks and 115 vias.

It is built around the ATMEGA328P-AU. Its parts include 13 connectors, 4 switches, 3 capacitors, 2 resistors and 1 IC. It belongs with the retro computing and games boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

gbaHD Shield

This is a shield for the gbaHD project.

Has the following features.

  • Connects via female headers to the Edge board (shield)
  • Has a FFC 40, 32 and 34 pin connector for GBA LCD connector.
  • Has a FFC 20 pin connector for controls with a wire up board.
  • Has a ATMEGA328p for using a SNES Classic connector to control the GBA.
  • Both FFC cables need to be opposite side

Issues

  • Havent had the chance to fully test the controller extension board, but the controller port on it works.
  • Controller extension board needs to be made bigger and separate the button from the LED and the LED from the controller port.
  • No case made for it yet
  • GND pin on the breakout board needs to be moved (doesnt affect anything)
  • Labels on breakout board need to be made bigger

Contributing

If you wish to contribute, see something wrong or want to add a feature please make a pull request or leave an issue!

BOM

ReferenceValue
C1, C222pF
C3100nF
R110K ohm
R2120 ohm (or change for your LED)
D15mm LED or
TJ-L5FPTGCRMFCSFLC2R-A5
U2ATMEGA328p-AU
X116MHz Crystal SMD-3225
SW1XKB-TS-1185EC-C-D-B
SW2XKB_XKB5858-Z-C
J1JUSHUO_AFC01-S40FCC-00
J2PinHeader 2x08 2.54mm
J3, J9JUSHUO_AFC01-S20FCC-00
J5JUSHUO_AFC07-S34FCC-00
J7JUSHUO_AFC01-S32FCC-00
J4PinHeader 2x10 2.54mm
P1, P2Wii Expansion Port
EXTRA 1PinHeader 1x08 2.54mm
EXTRA 2PinHeader 1x06 2.54mm

Programming the MCU

In order to program the MCU, you need an arduino to use as ISP.
Use the following image to wire up an arduino to the board to program it.
I would also recomend not programming it while seated in the FPGA board. PCB
After wiring the board, follow this tutorial to flash the bootloader and the sketch to the board.
ICSP Tutorial

The Arduino code requires the NintendoExtensionCtrl library.

Version 1 vs Version 2

  • Removed SNES connector for an classic controller connector
  • Made the PCB bigger and uses lower pins to improve stability
  • Added future proof pins to the edge board.
  • Panelized the board to lower the amount of PCBs needed
  • Added an "Expansion" board to relocate the controller port and add an LED and power switch (which needs to desolder old switch and be wired to the Spartan board)
  • Made the breakout board bigger and added more extra pins.
  • Changed FFC connectors (except 34 pin) to use a clamp down connector.

Images

PCB

LICENSE

This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2. You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions.

Parts

70
QtyValueFootprintReferences
15VAL**Panelization:mouse-bite-2.54mm-slotmousebite, mousebite, mousebite, mousebite, mousebite, mousebite, mousebite, mousebite, mousebite, mousebite, mousebite, mousebite, mousebite, mousebite, mousebite
222pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
2CONN_WIIRaizu_OFFSET:CONN_WIIP1, P2
2Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ8, J11
2Conn_01x20Raizu:JUSHUO_AFC01-S20FCC-00J3, J9
2VAL**keyboard_parts:HOLE_M3HOLEM3, HOLEM3
1100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3
110KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1120Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
1ATmega328P-AUPackage_QFP:TQFP-32_7x7mm_P0.8mmU2
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ10
1Conn_01x32Raizu:JUSHUO_AFC01-S32FCC-00J7
1Conn_01x34Raizu:JUSHUO_AFC07-S34FCC-00J5
1Conn_01x40Raizu:JUSHUO_AFC01-S40FCC-00J1
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ6
1Conn_02x08_Top_BottomConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ2
1Conn_02x10_Top_BottomConnector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_VerticalJ4
1Crystal_GND2Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mmX1
1EX1TestPoint:TestPoint_Pad_1.5x1.5mmEX1
1EX2TestPoint:TestPoint_Pad_1.5x1.5mmEX2
1EX3TestPoint:TestPoint_Pad_1.5x1.5mmEX3
1EX4TestPoint:TestPoint_Pad_1.5x1.5mmEX4
1GBA_ARaizu_OFFSET:SOLDER_PADTP0
1GBA_BRaizu_OFFSET:SOLDER_PADTP1
1GBA_CLKRaizu_OFFSET:SOLDER_PADGBA3
1GBA_DDRaizu_OFFSET:SOLDER_PADTP7
1GBA_DLRaizu_OFFSET:SOLDER_PADTP5
1GBA_DRRaizu_OFFSET:SOLDER_PADTP4
1GBA_DURaizu_OFFSET:SOLDER_PADTP6
1GBA_EX1Raizu_OFFSET:SOLDER_PADGEX1
1GBA_EX2Raizu_OFFSET:SOLDER_PADGEX2
1GBA_EX3Raizu_OFFSET:SOLDER_PADGEX3
1GBA_EX4Raizu_OFFSET:SOLDER_PADGEX4
1GBA_GNDRaizu_OFFSET:SOLDER_PADGBA4
1GBA_LRaizu_OFFSET:SOLDER_PADTP9
1GBA_RRaizu_OFFSET:SOLDER_PADTP8
1GBA_RESETRaizu_OFFSET:SOLDER_PADGBA2
1GBA_S01Raizu_OFFSET:SOLDER_PADS1
1GBA_S02Raizu_OFFSET:SOLDER_PADS2
1GBA_SELRaizu_OFFSET:SOLDER_PADTP2
1GBA_STRRaizu_OFFSET:SOLDER_PADTP3
1GBA_VCCRaizu_OFFSET:SOLDER_PADGBA1
1LEDLED_THT:LED_D5.0mm_FlatTopD1
1LOGORaizu_OFFSET:OFFSET_LOGO_4.0mmG***
1PinHeader_1x06_P2.54mm_VerticalConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalEXP2
1PinHeader_1x08_P2.54mm_VerticalConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalEXP1
1SW_PushRaizu_OFFSET:XKB-TS-1185EC-C-D-BSW1
1Switch-DPDTRaizu_OFFSET:XKB_XKB5858-Z-CSW2
1TestPointRaizu_OFFSET:SOLDER_PADTP19

The 68 most common of 70 parts.

Similar boards

  • 2 layers50.5 × 128.5 mmOpenThereminV45, the printed circuit board in 3D

    OpenThereminV45

    GaudiLabs/OpenThereminV4

    Open Source Theremin Instrument

    107 parts249GPL-3.0
  • 2 layers152 × 88 mmRFBitBangSMT, the printed circuit board in 3D

    RFBitBangSMT

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    271 parts222
  • 2 layers50.2 × 31.2 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    futureshocked/KLP4e_MCU-Datalogger

    This is the repository for the "MCU Datalogger" project.

    31 parts138MIT
  • 2 layers34 × 46 mmNfcemu, the printed circuit board in 3D

    Nfcemu

    solosky/nfc-emu

    NFC模拟器

    58 parts117Apache-2.0
  • 2 layers73 × 94 mmSportiduino base, the printed circuit board in 3D

    Sportiduino base

    sportiduino/sportiduino

    Electronic timing system for orienteering and similar outdoor sports events on Arduino

    119 parts78GPL-3.0
  • 2 layers58.9 × 44.2 mmOpenPSX2AmigaPadAdapter, the printed circuit board in 3D

    OpenPSX2AmigaPadAdapter

    SukkoPera/OpenPSX2AmigaPadAdapter

    Playstation to Commodore Amiga/CD32 Controller Adapter

    43 parts69
  • 2 layers60 × 50 mmVx8 gps prototype v2.0, the printed circuit board in 3D

    Vx8 gps prototype v2.0

    4x1md/vx8_gps

    DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.

    56 parts66MIT

Questions

How big is the GBAHD Shield PCB?

It measures 79.5 × 64.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the GBAHD Shield use?

70 parts, built around the ATMEGA328P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GBAHD Shield KiCad files?

From the sanchezand/GBAHD-Shield repository on GitHub, at the commit this page was made from: the board is shield/GBAHD_Shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the GBAHD Shield design in my own project?

Its repository states no licence, so its author keeps all rights: ask sanchezand before reusing the design.