Skip to the content
4 layers50.8 × 50.8 mmGrove sensor, the printed circuit board in 3D

Grove sensor

samuelclay/grove16

Grove is the forest inside your lungs. An interactive biofeedback art installation at Burning Man 2016

Size
50.8 × 50.8 mm
Copper layers
4
Thickness
1.6 mm
Parts
43
Nets
32
Pads
147
Tracks, vias
334, 42
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
31 May 2016
Updated
14 Jan 2018

Overview

Grove sensor is an open-source printed circuit board by samuelclay, from the samuelclay/grove repository on GitHub. It is a 4-layer board of 50.8 × 50.8 mm with 43 parts on 32 nets, routed with 334 tracks and 42 vias.

It is built around the ADD8704ARU and WS2812B. Its parts include 21 resistors, 6 capacitors, 6 ICs, 6 connectors and 3 diodes. It belongs with the sensors and measurement boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

2

README

README.md

Grove

Mailing list: grove-electronics@googlegroups.com

Boards

  1. Main board - Teensy shield

    • 4 x 3 pins for 144/m 5m strips on trunk
    • 4 x 5 pins (power + rgb) for dispatcher board
    • 3 pins (power + data) for breathing sensor
    • Power switch
    • PTC fuse + zener diode
    • 4 pins for buck converter, 12V -> 5V
  2. Sensor board

    • 3 pins from mainboard (power, data)
    • Proximity sensor (SI1143x)
    • IR motion detector
    • "breathing" sensor
    • active LEDs
  3. Dispatcher board

    • 4 x 5 pins input (power + rgb)
    • 4 PicoBucks (six pins in, six pins out)
    • 16 x 6 pin RGB LEDs (r±, g±, b±)

Concerns

  1. Power
    • 12V deep cycle marine batteries
    • Charging circuit
    • Solar array
    • Delivering 12V to each tree (voltage drop)
  2. Firmware
    • Performance over time
    • Running 4x trunks vs 1 trunk 4 times
  3. Lighting
    • Soldering high current LEDs
    • 144/m 5m vs splicing power

Timeline

  • May 31: Initial meeting
  • June 8th: Dispatcher board rev #1 sent to printer
  • June 9th: Main board rev #1 sent to printer
  • June 10th: Sensor board rev #1 sent to printer
  • July 1st: Boards return from printer, soldering begins
  • July 6th: Final board revisions sent to printer
  • July 27th: Final boards return from printer, soldering begins
  • August 20th: Installation begins on playa
  • August 28th: Burning Man begins

Useful links:

Grove proposal: https://docs.google.com/presentation/d/1Oe51Et6uq_moFoTw9EoB07Vlh8WwSTc89PW6PQpZ1io/edit#slide=id.g12e5fa7d1f_0_1 Grove budget: https://docs.google.com/spreadsheets/d/1ltcCgIae5ANJpvHL2A5ckWDxvADcpXeD_jZIF5hPCvg/edit#gid=0 Prototypes and earlier installation: https://cambridge.nuvustudio.com/studios/grove#tab-proposal-url

Parts

43
QtyValueFootprintReferences
710kResistors_SMD:R_0603_HandSolderingR1, R7, R9, R10, R23, R24, R26
42kResistors_SMD:R_0603_HandSolderingR3, R8, R11, R12
30Resistors_SMD:R_0603_HandSolderingR21, R22, R25
30.1uFCapacitors_SMD:C_0603_HandSolderingC1, C5, C6
3LEDLEDs:LED_0805D1, D2, D3
2CONN_01X01Pin_Headers:Pin_Header_Straight_1x01P5, P6
2CONN_01X03Pin_Headers:Pin_Header_Straight_1x03P1, P3
2WS2812BLEDs:LED_WS2812B-PLCC4U5, U6
11Resistors_SMD:R_0603_HandSolderingR6
1100uFCapacitors_SMD:C_1210_HandSolderingC4
110kResistors_SMD:R_0603R2
110uFCapacitors_SMD:C_0603_HandSolderingC2
115uFCapacitors_SMD:C_0603_HandSolderingC3
1165kResistors_SMD:R_0603_HandSolderingR4
130Resistors_SMD:R_0603_HandSolderingR14
1300Resistors_SMD:R_0603_HandSolderingR15
14.3kResistors_SMD:R_0603_HandSolderingR13
1ADD8704SI1143:TSSOP-14U1
1CONN_01X06Pin_Headers:Pin_Header_Straight_1x06P2
1CONN_01X07Pin_Headers:Pin_Header_Straight_1x07P4
1MCP1700TO_SOT_Packages_SMD:SOT-23U4
1Q_NPN_BECTO_SOT_Packages_SMD:SOT-23Q1
1SI1143SI1143:SI1143U2
1THERMResistors_SMD:R_0402R5
1Teensy_3.1Teensy-3:Teensy-3.1U3

More from samuelclay/grove

3
  • 2 layers110 × 80 mmTeensyShield progLED, the printed circuit board in 3D

    TeensyShield progLED

    samuelclay/grove

    Grove is the forest inside your lungs. An interactive biofeedback art installation at Burning Man 2016

    85 parts16
  • 2 layers110 × 80 mmTeensyShield progLED FINAL REV1, the printed circuit board in 3D

    TeensyShield progLED FINAL REV1

    samuelclay/grove

    Grove is the forest inside your lungs. An interactive biofeedback art installation at Burning Man 2016

    84 parts16
  • 2 layers156.8 × 75.6 mmGrove dispatcher, the printed circuit board in 3D

    Grove dispatcher

    samuelclay/grove

    Grove is the forest inside your lungs. An interactive biofeedback art installation at Burning Man 2016

    75 parts16

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 2 layers95.3 × 161.9 mmDfh badge, the printed circuit board in 3D

    Dfh badge

    tanaes/whopping_Voron_mods

    135 parts787GPL-3.0
  • 2 layers42.8 × 28.8 mmMM Skirt, the printed circuit board in 3D

    MM Skirt

    PrintersForAnts/Micron

    If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)

    11 parts741GPL-3.0
  • 2 layers149.6 × 127.1 mmErgodash, the printed circuit board in 3D

    Ergodash

    omkbd/ErgoDash

    keyboard

    187 parts732MIT
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 2 layers177.7 × 144.5 mmCOMM PANEL, the printed circuit board in 3D

    COMM PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    275 parts431

Questions

How big is the Grove sensor PCB?

It measures 50.8 × 50.8 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Grove sensor use?

43 parts, built around the ADD8704ARU and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Grove sensor KiCad files?

From the samuelclay/grove repository on GitHub, at the commit this page was made from: the board is sensor board/grove-sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Grove sensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask samuelclay before reusing the design.