

Microbug
PCB Decal
- Size
- 31.7 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 26
- Pads
- 87
- Tracks, vias
- 407, 25
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Feb 2020
- Updated
- 30 Apr 2020
Overview
Microbug is an open-source printed circuit board by samtron1412, from the samtron1412/198-hope repository on GitHub. It is a 2-layer board of 31.7 × 38.1 mm with 25 parts on 26 nets, routed with 407 tracks and 25 vias.
It is built around the ATTINY1616-SN, TC78H651AFNG,EL and QRE1113GR. Its parts include 8 resistors, 4 ICs, 3 capacitors, 3 diodes and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY1616-SN
SOIC-20-300mil-40℃~+105℃ 1.8V~5.5V 16KB 18 20MHz 256Byte 2KB 8 Bit AVR Built-in FLASH SOIC-20-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TC78H651AFNG,EL
TSSOP-16-40℃~+105℃ 220mΩ 2A Yes TSSOP-16 Stepper Motor Driver ROHSToshibaStepper Motor DriverQRE1113GR
SMD-4P1mm 20mA SMD-4P Reflective Optical Interrupters ROHSonsemiReflective Optical Interrupters
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R5, R8 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R6, R7 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D2, D3 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R4 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 2 | Motor_DC | microbug-fplib:micro_motor_5mm | M1, M2 |
| 2 | QRE1113GR | OptoDevice:Everlight_ITR8307F43 | U2, U4 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | ATtiny1616-S | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U1 |
| 1 | Battery_Cell | microbug-fplib:BK-883 | BT1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | LOGO | microbug-fplib:ieee_logo | G*** |
| 1 | TC78H651AFNG | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U3 |
More from samtron1412/198-hope
2- 2 layers62 × 95 mm

- 2 layers25.4 × 50.8 mm

Similar boards
- 2 layers31.7 × 38.1 mm

- 2 layers50.8 × 50.8 mm

DC2026 LASIR
CmdrZin/chips_avr_examples
AVR assembly and C code for robotics and other projects.
38 parts6MIT - 4 layers174 × 29 mm

- 2 layers25.4 × 28.8 mm

Kicad linear
fjalvingh/8bit-busdisplay
PCB for showing an 8 bit hex number from a 5V bus on a 7-segment display using an ATTINY1616
7 parts1 - 2 layers85.6 × 54 mm

PersonalPCB BC
Bumb1eris/PCB_Business_Card
A coin cell powered PCB business card that can play snake
73 partsMIT - 2 layers100 × 60 mm

- 2 layers80.5 × 53.8 mm

- 2 layers81.2 × 46.1 mm

Lightmeter
empdo/lightmeter
An open-hardware handheld photographic light meter. Set shutter speed and ISO on two dials, press the button, and one of nine LEDs lights up to show the aperture you should use. Runs from a single CR2032.
47 parts
Questions
How big is the Microbug PCB?
It measures 31.7 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Microbug use?
25 parts, built around the ATTINY1616-SN, TC78H651AFNG,EL and QRE1113GR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Microbug KiCad files?
From the samtron1412/198-hope repository on GitHub, at the commit this page was made from: the board is microbug/microbug.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Microbug design in my own project?
Its repository states no licence, so its author keeps all rights: ask samtron1412 before reusing the design.