
Lul left
weteor/LuttUnLutt
Lütt Un Lütt is a small 3x5+2 split ortho keyboard with encoder

A tactile, tactical tenkey calculator that doubles as a USB/BT numpad
Tactical tenkey is an open-source printed circuit board by sammothxc, from the sammothxc/tactical-tenkey repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 76.2 × 122 mm with 47 parts on 51 nets, routed with 425 tracks and 13 vias.
It is built around the DW01A and FS8205. Its parts include 16 diodes, 4 resistors, 3 connectors, 2 ICs and 1 capacitor. It belongs with the ESP32 boards of this library.
A tactile, tactical tenkey that doubles as a USB/BT numpad
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | ~ | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 14 | ~ | ScottoKeebs_Hotswap:Hotswap_MX_Plated_1.00u | S_-1, S_.1, S_*1, S_/1, S_1, S_2, S_3, S_4, S_5, S_6, S_7, S_8, S_9, S_num1 |
| 3 | ~ | ScottoKeebs_Hotswap:Hotswap_MX_Plated_2.00u | S_+1, S_0, S_enter1 |
| 2 | 220k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 0.08uF | Capacitor_THT:CP_Radial_Tantal_D4.5mm_P5.00mm | C1 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 18650 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | FS8205 | FS8205:SOT95P280X145-6N | Q2 |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | SW_SPDT | Personal:SS-12F23G5 | SW1 |
| 1 | XIAO-ESP32-S3-SMD | Seeed_Studio_XIAO_Series:XIAO-ESP32-S3-SMD_PAD | U1 |
| 1 | by sammothxc & kwarr | Personal:tactical_tenkey | G*** |
| 1 | esp32_side | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | io_side | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |

weteor/LuttUnLutt
Lütt Un Lütt is a small 3x5+2 split ortho keyboard with encoder


Badbird5907/thermal-camera
My design of a cheap and affordable thermal camera

MangoIV/le_chiff_ble
A drop-in replacement-PCB for the beautiful le_chiffre

KaliAssistant/Fox-Jack
Portable social-engineering LAN tool for automated payloads and wired audits — based on Luckfox Pico Max

badaboombox/SS-Handheld-Console
An open-source handheld game console built around a Lattice ECP5 FPGA that uses a custom hybrid 2D + 3D graphics engine capable of DS-era 2D-and-3D gameplay at a locked 60 fps.


Cyclone-92/TP4056-LiPo-charger-with-DW01A-and-FS8205A-MOSFET-protection
Kicad8 PCB design for LIPO single cell charger with TP4056 and DW01 protection
It measures 76.2 × 122 mm and has 2 copper layers, 1.6 mm thick.
47 parts, built around the DW01A and FS8205. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sammothxc/tactical-tenkey repository on GitHub, at the commit this page was made from: the board is pcb/tactical-tenkey.kicad_pcb and its schematic pcb/tactical-tenkey.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).