
IR SENSOR
Sahilhamids/IR-sensor-module
Designed a two layer PCB of IR sensor module andVoltage regulator using the open source EDA KiCADsoftware.

Designed a two layer PCB of IR sensor module andVoltage regulator using the open source EDA KiCADsoftware.
Tut 01 is an open-source printed circuit board by Sahilhamids, from the Sahilhamids/IR-sensor-module repository on GitHub. It is a 2-layer board of 37.9 × 30.8 mm with 7 parts on 4 nets, routed with 48 tracks and 7 vias.
It is built around the LM2596S-ADJ. Its parts include 2 capacitors, 2 connectors, 1 IC, 1 diode and 1 inductor.
Designed a two layer PCB of IR sensor module and Voltage regulator using the open source EDA KiCADsoftware.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C1, C2 |
| 1 | 1N5821 | Diode_THT:D_DO-201AD_P12.70mm_Horizontal | D1 |
| 1 | Conn_01x02_Pin | Connector:JWT_A3963_1x02_P3.96mm_Vertical | J2 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J1 |
| 1 | L | Inductor_SMD:L_7.3x7.3_H3.5 | L1 |
| 1 | LM2596S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |

Sahilhamids/IR-sensor-module
Designed a two layer PCB of IR sensor module andVoltage regulator using the open source EDA KiCADsoftware.



Aleksei327/ESP32-C5-OBD2-Scanner
DIY dual-CAN OBD2 adapter on Seeed XIAO ESP32-C5 with a Flutter Android app. Working prototype, tested on a Citroën C3 II: full read-only ECU scan, PSA fault codes, live data. Single-sided home-etched KiCad board.


Pendu1699/solar-mppt-charge-controller
ESP32-based solar MPPT charge controller, custom PCB, perturb & observe tracking algorithm, logged efficiency test data.



0BitsnBytes/McQueen
an overpowered rc car that poses a danger to my safety :)
It measures 37.9 × 30.8 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the LM2596S-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sahilhamids/IR-sensor-module repository on GitHub, at the commit this page was made from: the board is tut_01.kicad_pcb and its schematic IR_SENSOR/IR_SENSOR/IR_SENSOR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Sahilhamids before reusing the design.