

Buck converter
- Size
- 67.1 × 48.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 7
- Pads
- 30
- Tracks, vias
- 42, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Sep 2025
- Updated
- 14 Jan 2026
Overview
Buck converter is an open-source printed circuit board by yuvve, from the yuvve/aeroponics repository on GitHub. It is a 2-layer board of 67.1 × 48.1 mm with 10 parts on 7 nets, routed with 42 tracks and 4 vias.
It is built around the LM2596S-ADJ. Its parts include 2 connectors, 1 IC, 1 diode and 1 inductor. It belongs with the power boards of this library.
Main components
1README
README.mdaeroponics
EC sensor - current state
At the current state there is no EC-sensor that is done. However, there is a simulation file that has been made that is meant to be worked on so that it may one day meet specification for the rest of the project. Thease specifications include but are not limited to: being able to be powered by the given power source, not requireing negative source and have an output range between 0 - 3.3V as not to fry the microcontroller.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | C | aeroponics:TPME158K004R0015 | Cff1, Cin1, Cout1 |
| 2 | R_Potentiometer_Trim | Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical | RV1, RV2 |
| 2 | Screw_Terminal_01x02 | aeroponics:terminal-block-2-pole-TB006-508-02BE | J1, J2 |
| 1 | D | aeroponics:MBRS360T3G | D1 |
| 1 | L | aeroponics:36561040M101T | L1 |
| 1 | LM2596S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
Similar boards
- 2 layers90 × 53.4 mm

- 2 layers78.7 × 58.4 mm

- 2 layers40 × 60 mm

Scaner v1
Aleksei327/ESP32-C5-OBD2-Scanner
DIY dual-CAN OBD2 adapter on Seeed XIAO ESP32-C5 with a Flutter Android app. Working prototype, tested on a Citroën C3 II: full read-only ECU scan, PSA fault codes, live data. Single-sided home-etched KiCad board.
34 parts2 - 2 layers85.1 × 99.1 mm

- 2 layers105.6 × 72 mm

Solar mppt charge controller
Pendu1699/solar-mppt-charge-controller
ESP32-based solar MPPT charge controller, custom PCB, perturb & observe tracking algorithm, logged efficiency test data.
25 parts2MIT - 2 layers100 × 100 mm

- 6 layers100.5 × 101.5 mm

Custom ESC
0BitsnBytes/McQueen
an overpowered rc car that poses a danger to my safety :)
192 parts1GPL-3.0 - 2 layers31 × 58 mm

Questions
How big is the Buck converter PCB?
It measures 67.1 × 48.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Buck converter use?
10 parts, built around the LM2596S-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Buck converter KiCad files?
From the yuvve/aeroponics repository on GitHub, at the commit this page was made from: the board is design/buck-converter/kicad/buck-converter.kicad_pcb and its schematic design/buck-converter/kicad/buck-converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Buck converter design in my own project?
Its repository states no licence, so its author keeps all rights: ask yuvve before reusing the design.