2 layers
2 layers78.7 × 58.4 mm
AGV SENSOR PCB 2
Ashutoshkarve007/STM32_Learning3Learining STM32
- Size
- 78.7 × 58.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 30
- Pads
- 187
- Tracks, vias
- 315, 87
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Sep 2022
- Updated
- 16 Mar 2023
Overview
AGV SENSOR PCB 2 is an open-source printed circuit board by Ashutoshkarve007, from the Ashutoshkarve007/STM32_Learning repository on GitHub. It is a 2-layer board of 78.7 × 58.4 mm with 53 parts on 30 nets, routed with 315 tracks and 87 vias.
It is built around the MAX485CSA+, LM2596S-ADJ and LM1117-3.3, with the SS34 among its other parts. Its parts include 19 capacitors, 17 resistors, 7 connectors, 4 ICs and 2 diodes. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
4
MAX485CSA+
SOIC-80℃~+70℃ 1 1 2.5Mbps 300uA 32 4.75V~5.25V Half-Duplex Transceiver ±15kV SOIC-8 RS-485 / RS-422 ICs ROHSMaxim Integrated (Analog Devices)RS-485 / RS-422 ICs
LM2596S-ADJ
TO-263-5-40℃~+125℃@(TA) 1 1.2V~37V 150kHz 3A 40V 80uA Adjustable Buck Buck Built-in No TO-263-5 DC-DC Converters ROHSUMWDC-DC Converters
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdSTM32_Learning
Learn STM32 together. Create your name folder, >> create pull request.
#add to discord webhook lk
Slave Board
pin 1 - VCC Modbus side pin 2 - DO pin 3 - CLK pin 4 - rst* pin 5 - GND
Master - Slave
Request Data - {slave_id, 0x06, CRC_L, CRC_H}
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C7, C9, C11, C13, C14, C15, C16, C19 |
| 10 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R8, R14, R15, R16, R17 |
| 4 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C8 |
| 3 | Screw_Terminal_01x04 | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_4-G-5.08_1x04_P5.08mm_Vertical | J2, J3, J5 |
| 2 | 0 | Resistor_SMD:R_0805_2012Metric | R7, R11 |
| 2 | 10uF/50V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C17, C18 |
| 2 | 20K | Resistor_SMD:R_0805_2012Metric | R6, R10 |
| 2 | 220uF/50V | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C10, C12 |
| 2 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1, J7 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 120E | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 32.768Khz | Crystal:Crystal_DS26_D2.0mm_L6.0mm_Horizontal | Y2 |
| 1 | 33uH | Inductor_SMD:L_12x12mm_H6mm | L1 |
| 1 | 8Mhz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | LM2596S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | MAX485CSA+ | MAX485CSA+:SOIC127P600X175-8N | IC1 |
| 1 | Programming | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J4 |
| 1 | SS34 | SS34ALH:SODFL5226X100N | D1 |
| 1 | STM32F103C6Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_MEC_5E | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | Slave selection | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J6 |
More from Ashutoshkarve007/STM32_Learning
1Similar boards
- 2 layers31 × 24 mm
- 4 layers85 × 54 mm
PECDR
pedro-ibs/trekking
Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”
68 parts9 - 2 layers172.7 × 114.3 mm
Modules
DarekKrawczyk/MastersThesis
System to support management and control of plant cultivation
115 parts3 - 2 layers53 × 103 mm
PersianaPCB
dsi-fceia/persianaPCB
Proyecto desarrollado en Curso: Diseño integral de productos tecnológicos basados en Sistemas Electrónicos Embebidos
57 parts - 2 layers40 × 60 mm
Scaner v1
Aleksei327/ESP32-C5-OBD2-Scanner
DIY dual-CAN OBD2 adapter on Seeed XIAO ESP32-C5 with a Flutter Android app. Working prototype, tested on a Citroën C3 II: full read-only ECU scan, PSA fault codes, live data. Single-sided home-etched KiCad board.
34 parts2 - 6 layers100.5 × 101.5 mm
Custom ESC
0BitsnBytes/McQueen
an overpowered rc car that poses a danger to my safety :)
192 parts1GPL-3.0 - 2 layers43 × 21.3 mm
- 2 layers39.1 × 68.9 mm
BaseChipOnly
ZonatedCord/Yggdrasill
Smart LED plant pot — ESP32 PCB, WS2812B/SK6812 LEDs, WLED firmware, modular 3D-printed vase, and a native iOS app with Apple's Liquid Glass design.
34 parts1
Questions
How big is the AGV SENSOR PCB 2 PCB?
It measures 78.7 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AGV SENSOR PCB 2 use?
53 parts, built around the MAX485CSA+, LM2596S-ADJ, LM1117-3.3 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AGV SENSOR PCB 2 KiCad files?
From the Ashutoshkarve007/STM32_Learning repository on GitHub, at the commit this page was made from: the board is shambhavi/Hardware/AGV_SENSOR_PCB_2/AGV_SENSOR_PCB_2/AGV_SENSOR_PCB_2.kicad_pcb and its schematic shambhavi/QURO hardware training/5V/5V.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AGV SENSOR PCB 2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ashutoshkarve007 before reusing the design.