4 layers76.7 × 86.3 mm
LumiCtrl
saeedniko/LumiCtrl
Hardware and firmware design for controlling LED strips using an ESP32 microcontroller. Includes circuit design, PCB layout, and software for lighting effects and control.
110 partsGPL-3.0
4 layers
LumiCtrl
saeedniko/LumiCtrlHardware and firmware design for controlling LED strips using an ESP32 microcontroller. Includes circuit design, PCB layout, and software for lighting effects and control.
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 138
- Nets
- 106
- Pads
- 424
- Tracks, vias
- 506, 204
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 Sep 2025
- Updated
- 16 Aug 2026
Overview
LumiCtrl is an open-source printed circuit board by saeedniko, from the saeedniko/LumiCtrl repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board with 138 parts on 106 nets, routed with 506 tracks and 204 vias.
It is built around the ESP32-C6-MINI-1-N4, HDC1080DMBR and TPS562202DRL, with the TPS62081DSGR, VL53L8CHV0GC/1 and AP7384-50SA among its other parts. Its parts include 68 resistors, 29 capacitors, 10 ICs, 9 diodes and 3 connectors. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.
Main components
11
ESP32-C6-MINI-1-N4
SMD-53P-106dBm -40℃~+85℃ 2.4GHz 21dBm 354mA 3V~3.6V 71mA ESP32-C6FH4 Integrated Bluetooth function、Integrated Zigbee function On-board PCB Antenna UART、SPI、I2C、GPIO、I2S SMD-53P WiFi Modules ROHSEspressif SystemsWiFi Modules
HDC1080DMBR
WSON-6(3x3)-40℃~+125℃ 0%RH~100%RH 1.3uA 14bit 2.7V~5.5V I2C ±0.2℃ ±2%RH WSON-6(3x3) Temperature and Humidity Sensor ROHSTexas InstrumentsTemperature And Humidity Sensor
TPS562202DRL
SOT-6(3x5)-40℃~+125℃@(TJ) 1 2A 4.3V~17V 520uA 580kHz 804mV~7V Adjustable Buck Buck Built-in Yes SOT-6(3x5) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
TPS62081DSGR
WSON-8-EP(2x2)-40℃~+85℃@(TA) 1 1.2A 1.8V 2.3V~6V 2MHz 6.5uA Buck Buck Built-in Fixed Yes WSON-8-EP(2x2) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
VL53L8CHV0GC/1
-- Position Sensors ROHSSTMicroelectronicsPosition Sensors
AP7384-50SA
SOT-23-40℃~+125℃@(Tj) 1 2.5uA 40V 50mA 5V Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PCA9306DCUR
VSSOP-8-40℃~+85℃ 1 1.2V~3.3V 1.8V~5.5V 2 Auto Direction Detection Bidirectional Push-Pull、Open-drain VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
NLCV32T-1R0M-PFR
12101.7A 1uH 55mΩ Wire-wound inductor ±20% 1210 Power Inductors ROHSTDKPower Inductors
B4B-XH-AM-BK
插件,P=2.5mm-25℃~+85℃ 1 12.4mm 1x4P 2.5mm 250V 3A 4 4P 5.75mm 7mm Black Brass K Pin、With post PA66 Through Hole Tin UL94V-0 XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
ICS-43432
SMD-7P,3x4mm-26dB 1.5mA 1.62V~3.63V 1mm 3mm 4mm 50Hz~20kHz 65dB I2S Omnidirectional Omnidirectional pickup SMD-7P,3x4mm MEMS Microphones ROHSTDK InvenSenseMEMS Microphones
USB4105-GF-A-120
SMD-40℃~+85℃ 1 16P 48V 5A Black Female Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdLumiCtrl
Hardware and firmware design for controlling LED strips using an ESP32 microcontroller. Includes circuit design, PCB layout, and software for lighting effects and control.
Parts
138| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 0R | Resistor_SMD:R_0603_1608Metric | R2, R3, R10, R13, R14, R17, R41, R42, R43, R44, R45, R46, R47, R48, R49, R50 +9 |
| 15 | 100n/50V | Capacitor_SMD:C_0603_1608Metric | C2, C4, C7, C8, C9, C10, C15, C16, C19, C20, C22, C24, C28, C29, C30 |
| 7 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R4, R24, R25, R28, R31, R35 |
| 7 | LED_green | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D8, D9 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP5, TP6, TP7, TP8, TP9, TP10 |
| 6 | 47K | Resistor_SMD:R_0603_1608Metric | R5, R7, R18, R36, R37, R38 |
| 6 | 4K7 | Resistor_SMD:R_0603_1608Metric | R59, R60, R61, R62, R63, R64 |
| 4 | 22u/10V | Capacitor_SMD:C_1206_3216Metric | C1, C13, C26, C27 |
| 3 | 100K | Resistor_SMD:R_0603_1608Metric | R9, R32, R56 |
| 3 | 10u/25V | Capacitor_SMD:C_1206_3216Metric | C6, C11, C25 |
| 3 | 270R | Resistor_SMD:R_0603_1608Metric | R22, R29, R30 |
| 3 | 33p/50V | Capacitor_SMD:C_0603_1608Metric | C14, C21, C23 |
| 3 | 470R | Resistor_SMD:R_0603_1608Metric | R15, R34, R57 |
| 2 | 20K | Resistor_SMD:R_0603_1608Metric | R19, R33 |
| 2 | 2K2 | Resistor_SMD:R_0603_1608Metric | R39, R40 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | SS0840WS | Diode_SMD:D_SOD-323F | D6, D7 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 1 | 1.5m/16V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm_P7.50mm | C18 |
| 1 | 10n/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 1u/10V | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1uH | Inductor_SMD:L_TDK_NLV32_3.2x2.5mm | L2 |
| 1 | 200K | Resistor_SMD:R_0603_1608Metric | R58 |
| 1 | 220R | Resistor_SMD:R_0603_1608Metric | R54 |
| 1 | 24K | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 27K | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 2u2 | Inductor_SMD:L_Taiyo-Yuden_NR-24xx_HandSoldering | L1 |
| 1 | 33R@100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 4u7/25V | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 56K | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 75K | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 8K2 | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 91K | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | AP7384-50SA | Package_TO_SOT_SMD:SOT-23 | U8 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | ESP32-C6-MINI-1-N4 | RF_Module:ESP32-C6-MINI-1 | U1 |
| 1 | Fuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | HDC1080DMBR | HDC1080DMBR:SON100P300X300X80-7N | U10 |
| 1 | ICS-43432 | ICS_43432:MIC_ICS-43432 | MK1 |
| 1 | PCA9306DCUR | PCA9306DCUR:SOP50P310X90-8N | U4 |
| 1 | TC7SET126FU_LJCT | TC7SET126FU:SOT-353F USV_TOS | U7 |
| 1 | TPS26400PWPR | footprints:PWP0016H-IPC_A | U6 |
| 1 | TPS562202 | Package_TO_SOT_SMD:SOT-563 | U5 |
| 1 | TPS62081DSGR | TPS62081DSGR:SON50P200X200X80-9N | U2 |
| 1 | VL53L8CHV0GC/1 | ul_VL53L8CHV0GC-1:LGA17_VL53L8CHV0GC&slash_1_STM | U9 |
| 1 | WE-TVS-82400102 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | ~ | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
More from saeedniko/LumiCtrl
1Similar boards
- 2 layers30 × 50.8 mm
- 8 layers300 × 120 mm
BenchyMotherBoard AM625
Daxxn/BenchyReloaded
New and improved Benchy, now with more doodads!
1,054 parts2AGPL-3.0 - 2 layers70 × 70 mm
- 4 layers101.3 × 50.5 mm
ESP32 sensor board
Ankithkumarsingh/ESP32-custom-sensor-board
This PCB contains the power supply unit, ESP32 module as compute, microphone sensor, light sensing sensor, SDCard module for data logging.
94 parts1 - 4 layers88.6 × 55.6 mm
ESP32 4 layers
riteshsalikeripatil/ESP32-IoT-Development-Board
Custom ESP32 IoT Development Board designed in KiCad.
95 parts1MIT - 4 layers100 × 84 mm
- 2 layers60 × 100 mm
- 2 layers95.4 × 30 mm
Questions
What parts does the LumiCtrl use?
138 parts, built around the ESP32-C6-MINI-1-N4, HDC1080DMBR, TPS562202DRL and TPS62081DSGR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LumiCtrl KiCad files?
From the saeedniko/LumiCtrl repository on GitHub, at the commit this page was made from: the board is Hardware/LumiCtrl_rev11/LumiCtrl.kicad_pcb and its schematic Hardware/LumiCtrl_rev10/LumiCtrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LumiCtrl design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).