Skip to the content
2 layers70 × 70 mmLED strip stand lamp, the printed circuit board in 3D

LED strip stand lamp

saeedniko/LED_strip_stand_lamp2
Full screenGitHub.kicad_pcb
Size
70 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
92
Nets
88
Pads
298
Tracks, vias
435, 226
Pours
5
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
6 May 2024
Updated
15 Feb 2026

Overview

LED strip stand lamp is an open-source printed circuit board by saeedniko, from the saeedniko/LED_strip_stand_lamp repository on GitHub. It is a 2-layer board of 70 × 70 mm with 92 parts on 88 nets, routed with 435 tracks and 226 vias.

It is built around the ESP32-WROOM-32E, CP2102N-A02-GQFN24 and TPS562242DRL, with the AP7384-50SA among its other parts. Its parts include 32 resistors, 25 capacitors, 8 diodes, 7 ICs and 3 connectors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.

Main components

4

README

README.md

LED_strip_stand_lamp

led_strip_stand_lamp

photo_5197630205005521579_y

Parts

92
QtyValueFootprintReferences
12100n/50VCapacitor_SMD:C_0603_1608MetricC2, C3, C4, C6, C7, C13, C14, C15, C16, C17, C19, C23
810kResistor_SMD:R_0603_1608MetricR1, R4, R17, R19, R20, R22, R24, R32
6270RResistor_SMD:R_0603_1608MetricR8, R9, R10, R28, R29, R30
5LED_greenLED_SMD:LED_0603_1608MetricD1, D3, D6, D7, D8
40Resistor_SMD:R_0603_1608MetricR2, R3, R11, R12
422u/10VCapacitor_SMD:C_1206_3216MetricC1, C5, C11, C25
433p/50VCapacitor_SMD:C_0603_1608MetricC12, C18, C20, C22
4TestPointTestPoint:TestPoint_Pad_D1.0mmTP1, TP2, TP3, TP4
310u/25VCapacitor_SMD:C_1206_3216MetricC8, C9, C24
256kResistor_SMD:R_0603_1608MetricR6, R31
2MountingHoleMountingHole:MountingHole_3.2mm_M3H2, H4
2SS0840WSDiode_SMD:D_SOD-323FD4, D5
2SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2SW1, SW2
2SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1, JP2
11.5m/16VCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC21
1100KResistor_SMD:R_0603_1608MetricR25
1100kResistor_SMD:R_0603_1608MetricR7
110n/50VCapacitor_SMD:C_1206_3216MetricC10
11kResistor_SMD:R_0603_1608MetricR5
120KResistor_SMD:R_0603_1608MetricR26
120kResistor_SMD:R_0603_1608MetricR14
124kResistor_SMD:R_0603_1608MetricR16
127kResistor_SMD:R_0603_1608MetricR23
12N7002Package_TO_SOT_SMD:SOT-23Q1
12u2Inductor_SMD:L_Taiyo-Yuden_NR-24xxL1
1300R@100MHzInductor_SMD:L_0603_1608MetricFB1
1470RResistor_SMD:R_0603_1608MetricR27
147kResistor_SMD:R_0603_1608MetricR13
175KResistor_SMD:R_0603_1608MetricR15
18k2Resistor_SMD:R_0603_1608MetricR21
191kResistor_SMD:R_0603_1608MetricR18
1AP7384-50SAPackage_TO_SOT_SMD:SOT-23U7
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_HorizontalJ2
1CP2102N-A02-GQFN24Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU2
1Conn_01x04_PinConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ3
1ESP32-WROOM-32ERF_Module:ESP32-WROOM-32DU1
1LED_orangeLED_SMD:LED_0603_1608MetricD2
1LOGOlib-footprint:github-logoG***
1SW_PushButton_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFSSW3
1TC7SET126FUPackage_TO_SOT_SMD:SOT-353_SC-70-5U5
1TPS26400PWPRPackage_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3x3mmU6
1TPS562242Package_TO_SOT_SMD:SOT-563U4
1TestPointTestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP5
1USB_B_MicroConnector_USB:USB_Micro-B_Wuerth_629105150521J1
1WE-TVS-82400102Package_TO_SOT_SMD:SOT-23-6U3
1n.b.Fuse:Fuse_1206_3216MetricF1

Similar boards

  • 4 layers76.7 × 86.3 mmLumiCtrl, the printed circuit board in 3D

    LumiCtrl

    saeedniko/LumiCtrl

    Hardware and firmware design for controlling LED strips using an ESP32 microcontroller. Includes circuit design, PCB layout, and software for lighting effects and control.

    110 partsGPL-3.0
  • 2 layers49.5 × 40.5 mmHcv, the printed circuit board in 3D

    Hcv

    chrkir/hcv

    Local Viessmann E3 CAN-bus to MQTT bridge for Vitocal heat pumps. Features Home Assistant Auto-Discovery, ESP32 firmware, and Open Hardware.

    32 parts9
  • 4 layers67 × 83 mmApple peeler pcb, the printed circuit board in 3D

    Apple peeler pcb

    SIGPLAN-AV/apple-peeler

    HDMI MITM device aimed at supplying crafted EDID to make Apple sources behave

    138 parts
  • 2 layers60 × 100 mmMasterBoard A, the printed circuit board in 3D

    MasterBoard A

    Gregification/BeeMS

    Battery Management System

    167 parts5MIT
  • 2 layers95.4 × 30 mmIOController, the printed circuit board in 3D

    IOController

    Envious-Data/EnvOpenTorch

    An open source USB rechargable LED Torch

    40 parts1GPL-3.0
  • 2 layers40 × 40 mmCorridor node, the printed circuit board in 3D

    Corridor node

    lucanastasio/myHomeAutomation

    Home automation stuff

    63 parts1
  • 2 layers140 × 100 mmPlts monitoring controller, the printed circuit board in 3D

    Plts monitoring controller

    desvandi/PLTSMonitoring_Firmware-Backend

    Integrated to PLTSMonitoring_PWA

    152 parts

Questions

How big is the LED strip stand lamp PCB?

It measures 70 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED strip stand lamp use?

92 parts, built around the ESP32-WROOM-32E, CP2102N-A02-GQFN24, TPS562242DRL and AP7384-50SA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED strip stand lamp KiCad files?

From the saeedniko/LED_strip_stand_lamp repository on GitHub, at the commit this page was made from: the board is hardware/led_strip_stand_lamp/led_strip_stand_lamp.kicad_pcb and its schematic hardware/led_strip_stand_lamp/led_strip_stand_lamp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED strip stand lamp design in my own project?

Its repository states no licence, so its author keeps all rights: ask saeedniko before reusing the design.