2 layers44.5 × 43 mm
Vik universal
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
154 parts220CERN-OHL-P-2.0
2 layers24.8 × 43.5 mm
Haptic
sadekbaroudi/vik220This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
- Size
- 24.8 × 43.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 13
- Pads
- 31
- Tracks, vias
- 30, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 May 2023
- Updated
- 13 Sep 2025
Overview
Haptic is an open-source printed circuit board by sadekbaroudi, from the sadekbaroudi/vik repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 24.8 × 43.5 mm with 10 parts on 13 nets, routed with 30 tracks and 11 vias.
Its parts include 2 resistors and 2 connectors.
README
pcb/per56-cirque-leds/README.mdPER56 Scroll Ring with Cirque Trackpad and LEDs
Overview
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
This was used to demonstrate a build for vulpes minora. See the repo for pictures.
Fabrication and BOM
For PCB fabrication, you can use the files in the production folder.
- gerbers.zip - the file used to fabricate the pcb
- bom.csv - used for PCBA. You can also use the part numbers in this file to look up the exact parts as lcsc.com
- positions.csv - used for PCBA
Using the 3 files above, this has been tested at jlcpcb.com
VIK module certification
| Category | Classification | Response |
|---|---|---|
| FPC connector | Required | :heavy_check_mark: |
| Breakout pins | Recommended | :x: |
| Uses: SPI | Optional | :heavy_check_mark: |
| SPI used for SPI only | Strongly recommended | :heavy_check_mark: |
| Uses: I2C | Optional | :x: |
| I2C used for I2C only | Strongly Recommended | N/A |
| I2C pull ups | Required | N/A |
| Uses: RGB | Optional | :heavy_check_mark: |
| Uses: Extra GPIO 1 | Optional | :heavy_check_mark: |
| Uses: Extra GPIO 2 | Optional | :heavy_check_mark: |
| Standard PCB Size/Mount | Strongly recommended | Large |
PCB images
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 4.7k | fingerpunch:D3_TH_SMD | R1, R2 |
| 1 | Pimoroni | fingerpunch:Pimoroni Haptic Buzz DRV2605L Driver | J2 |
| 1 | ~ | vik:vik-module-connector-horizontal | J1 |
The 8 most common of 10 parts.
Questions
How big is the Haptic PCB?
It measures 24.8 × 43.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Haptic use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Haptic KiCad files?
From the sadekbaroudi/vik repository on GitHub, at the commit this page was made from: the board is pcb/haptic/haptic.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Haptic design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from sadekbaroudi/vik
12- 2 layers94 × 94.5 mm
Vikropad
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
59 parts220CERN-OHL-P-2.0 - 2 layers99 × 65.5 mm
Vik playground
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
40 parts220CERN-OHL-P-2.0 - 2 layers25 × 25 mm
Pmw3610
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
24 parts220CERN-OHL-P-2.0 - 2 layers52 × 46.6 mm
Vik universal
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
24 parts220CERN-OHL-P-2.0 - 2 layers25 × 25 mm
Pmw3360
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
22 parts220CERN-OHL-P-2.0 - 2 layers25.9 × 41.3 mm
Pmw3610
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
22 parts220CERN-OHL-P-2.0 - 2 layers64.8 × 63.5 mm
Scroll wheel trackball
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
21 parts220CERN-OHL-P-2.0 - 2 layers25.9 × 41.3 mm
Pmw3360
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
20 parts220CERN-OHL-P-2.0 - 2 layers64.8 × 63.5 mm
Scroll wheel trackball
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
19 parts220CERN-OHL-P-2.0 - 2 layers25 × 25 mm
Ec11-evqwgd001
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
18 parts220CERN-OHL-P-2.0 - 2 layers25 × 42 mm
Haptic drv2605l
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
15 parts220CERN-OHL-P-2.0
Similar boards
- 2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0