2 layers43 × 43 mm
2 layers20 × 15 mm
Magic sensor pcb
s-light/magic_sensor_pcbI2C Sensor: Avago APDS 9960 & Bosch BME680 on mini breakout
- Size
- 20 × 15 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 7
- Pads
- 37
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Dec 2018
- Updated
- 14 Dec 2018
Overview
Magic sensor pcb is an open-source printed circuit board by s-light, from the s-light/magic_sensor_pcb repository on GitHub. It is a 2-layer board of 20 × 15 mm with 13 parts on 7 nets.
It is built around the APDS-9960 and BME680. Its parts include 5 capacitors, 3 resistors, 3 connectors and 2 ICs. It belongs with the sensors and measurement and interfaces and adapters boards of this library.
Main components
2README
README.mdmagic sensor pcb
Two I2C sensor on mini breakout board:
- APDS-9960 Digital RGB, Ambient Light, Proximity and Gesture Sensor
- BME680 gas, pressure, humidity and temperature
magic sensor pcb by Stefan Krüger (s-light) is licensed under a
Creative Commons Attribution 4.0 International License .
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 1 | 22R | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | APDS-9960 | Package_DFN_QFN:DFN-8_2x2mm_P0.5mm | U2 |
| 1 | APDS-9960_INT | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J1 |
| 1 | BME680 | Package_LGA:Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering | U1 |
| 1 | data | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | power | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
Questions
How big is the Magic sensor pcb PCB?
It measures 20 × 15 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Magic sensor pcb use?
13 parts, built around the APDS-9960 and BME680. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Magic sensor pcb KiCad files?
From the s-light/magic_sensor_pcb repository on GitHub, at the commit this page was made from: the board is magic_sensor_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Magic sensor pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask s-light before reusing the design.
Similar boards
- 4 layers43 × 43 mm
- 8 layers120 × 60 mm
DFTBoard
juliancoy/zynqPCB
An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection
299 parts75MIT - 4 layers50.8 × 22.9 mm
Bald Sense Wing v3
baldengineer/BaldSENSE_Sensor_Feather_Wing
A temperature, humidity, light, and sound sensor wing
63 parts9MIT - 2 layers85 × 70 mm
PRTGN v1
bismarx-v1/PRTGN
OwO whats this (This repo contains electronics, mechanical and software data for a protogen visor)
69 parts6 - 2 layers134 × 38.5 mm
LED Clock
bitbank2/LED_Clock
A low cost PCB project (w/firmware) for a dark-room-friendly digital clock
97 parts6Apache-2.0 - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers100.1 × 100.1 mm
