8 layers120 × 60 mm
DFTBoard
juliancoy/zynqPCB
An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection
299 parts75MIT
2 layers85 × 70 mm
PRTGN v1
bismarx-v1/PRTGN6OwO whats this (This repo contains electronics, mechanical and software data for a protogen visor)
- Size
- 85 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 65
- Pads
- 241
- Tracks, vias
- 570, 123
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Jun 2025
- Updated
- 9 Oct 2026
Overview
PRTGN v1 is an open-source printed circuit board by bismarx-v1, from the bismarx-v1/PRTGN repository on GitHub. It is a 2-layer board of 85 × 70 mm with 69 parts on 65 nets, routed with 570 tracks and 123 vias.
It is built around the ESP32-S3-WROOM-1-N8, APDS-9960 and USBLC6-2SC6. Its parts include 15 resistors, 12 capacitors, 12 connectors, 6 diodes and 3 ICs. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
3
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
APDS-9960
LGA-8LGA-8 Abolished Device ROHSBroadcom LimitedAmbient Light Sensors
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdPRTGN
OwO whats this (This repo contains electronics, mechanical and software data for a protogen visor)
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C5, C9, C10, C11, C12 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R5, R8, R9, R10 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | 22uF | Capacitor_Tantalum_SMD:CP_EIA-2012-12_Kemet-R | C4, C6, C7, C8 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D3, D4, D5, D6 |
| 2 | 15R | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric | R11, R12 |
| 2 | 220R | Resistor_SMD:R_0805_2012Metric | R13, R14 |
| 2 | Conn_01x05_Socket | gps-compass_brd:SolderWire-Relief-5pin | J8, J9 |
| 2 | D_Schottky | Diode_SMD:D_2114_3652Metric | D1, D2 |
| 2 | Fan_4pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1, M2 |
| 2 | JST-VH4 | Connector_JST:JST_VH_B4P-VH-B_1x04_P3.96mm_Vertical | J2, J5 |
| 2 | SOLDER PAD | PRTGN_brd:SolderWirePad_1x01_SMD | J3, J4 |
| 2 | SW_Push | sumec_brd:SW_SPST_EVQPE1 | SW2, SW3 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6, J7 |
| 2 | TestPoint | sumec_graphic:OWO_IMG | TPd4, TPd6 |
| 1 | 02x08 IDC | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical_SMD | J10 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 1.5uH | Inductor_SMD:L_Vishay_IHLP-1212 | L1 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 45k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | APDS-9960 | gps-compass_brd:SolderWire-Relief-4pin | J11 |
| 1 | Buzzer | inset:AST0827MW-03BTRQ_MAL | BZ1 |
| 1 | Conn_01x03_Socket | gps-compass_brd:SolderWire-Relief-3pin | J12 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1 | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Q_PMOS | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | SW_SPDT | sumec_brd:Custom_SPDT_2.5_Switch | SW1 |
| 1 | TPS565242DRLR | Package_TO_SOT_SMD:SOT-563 | IC1 |
| 1 | TestPoint | sumec_graphic:BOYKISSER_IMG | TPd3 |
| 1 | TestPoint | PRTGN_brd:APERTURE_ART | TPd1 |
| 1 | TestPoint | sumec_graphic:PURO_CHANGED_IMG | TPd8 |
| 1 | TestPoint | PRTGN_brd:LEGOSHI_SILK | TPd2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | USB_TypeC | sumec_brd:HRO_TYPE-C-31-M-12 | J1 |
Questions
How big is the PRTGN v1 PCB?
It measures 85 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PRTGN v1 use?
69 parts, built around the ESP32-S3-WROOM-1-N8, APDS-9960 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PRTGN v1 KiCad files?
From the bismarx-v1/PRTGN repository on GitHub, at the commit this page was made from: the board is Electronics/PRTGN_v1/PRTGN_v1.kicad_pcb and its schematic Electronics/PRTGN_v1/PRTGN_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PRTGN v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask bismarx-v1 before reusing the design.
Similar boards
- 2 layers43 × 43 mm
- 4 layers50.8 × 22.9 mm
Bald Sense Wing v3
baldengineer/BaldSENSE_Sensor_Feather_Wing
A temperature, humidity, light, and sound sensor wing
63 parts9MIT - 2 layers134 × 38.5 mm
LED Clock
bitbank2/LED_Clock
A low cost PCB project (w/firmware) for a dark-room-friendly digital clock
97 parts6Apache-2.0 - 4 layers43 × 43 mm
- 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers100.1 × 100.1 mm
- 2 layers51.1 × 35.6 mm
SensorBoard
cherri03ly25/at-iot
This project is an IOTs project for Tuxera to develop wireless sensor boad.
43 parts2