
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!

ENN node.v1 is an open-source printed circuit board by ryanrdetzel, from the ryanrdetzel/KiCad-PCB-Designs repository on GitHub. It is a 2-layer board of 54.4 × 25.5 mm with 24 parts on 38 nets, routed with 228 tracks and 15 vias.
It is built around the ATMEGA328P-AU. Its parts include 8 capacitors, 4 resistors, 3 connectors, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uf | Capacitors_SMD:C_0805_HandSoldering | C3, C4, C5, C9, C10 |
| 2 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 2 | 4k7 | Resistors_SMD:R_0805_HandSoldering | R1, R2 |
| 1 | 10k | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 10uf | Capacitors_SMD:C_0805_HandSoldering | C6 |
| 1 | 330 | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | ATmega328P-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | Analog Connector | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | Conn_Coaxial | resonator:CONN-RF-UFL | ANT1 |
| 1 | Digital Connector | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J2 |
| 1 | FTDI | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | FTDI |
| 1 | I2C Bus | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | I2C |
| 1 | ICSP | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | ICSP |
| 1 | LED | LEDs:LED_0805_HandSoldering | D1 |
| 1 | Power Connector | Connectors_JST:JST_PH_B2B-PH-K_02x2.00mm_Straight | J7 |
| 1 | RFM69W | RF_Modules:HOPERF-RFM69HW | RFM69 |
| 1 | Resonator | resonator:ResTest | Y1 |
The 23 most common of 24 parts.

dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!


profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance

futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.


sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino

SukkoPera/OpenPSX2AmigaPadAdapter
Playstation to Commodore Amiga/CD32 Controller Adapter

4x1md/vx8_gps
DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.
It measures 54.4 × 25.5 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the ATMEGA328P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ryanrdetzel/KiCad-PCB-Designs repository on GitHub, at the commit this page was made from: the board is ENN-node.v1/ENN-node.v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ryanrdetzel before reusing the design.