2 layers56 × 86 mm
2 layers60 × 40 mm
LSR drone
ryanabraham1/LSR-drone3KiCad Files for LSR drone pcb
- Size
- 60 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 46
- Pads
- 94
- Tracks, vias
- 246, 14
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Aug 2024
- Updated
- 10 Aug 2024
Overview
LSR drone is an open-source printed circuit board by ryanabraham1, from the ryanabraham1/LSR-drone repository on GitHub, published under the MIT licence. It is a 2-layer board of 60 × 40 mm with 15 parts on 46 nets, routed with 246 tracks and 14 vias.
It is built around the NRF24L01, L293D and XT30UPB-M. Its parts include 9 ICs, 4 capacitors and 1 connector. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3
NRF24L01
QFN-20-EP(4x4)-40℃~+85℃ -85dBm 0dBm 1.9V~3.6V 2.4GHz 2Mbps CRC check function、Automatic response function、Automatic retransmission function SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
L293D
DIP-16-40℃~+150℃ 1.2A 2 4.5V~36V 4mA 600mA DIP-16 Brushed DC Motor Drivers ROHSSTMicroelectronicsStepper Motor Driver
XT30UPB-M
--、Aviation model plug 0.65mΩ 15A DC 500V Gold Plated Male PA Yellow - Power connector / plug connectorAMASSPlug
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 330nF | LSR_drone:CAP-SMD_L3.2-W1.6 | C5, C6, C7, C8 |
| 4 | DC Motor | LSR_drone:TT DC MOTOR | U14, U15, U16, U17 |
| 2 | L293D | LSR_drone:DIP-16_L20.0-W6.4-P2.54-LS7.6-BL | U10, U13 |
| 2 | LM7805-5V | LSR_drone:TO-252-2_L6.6-W6.1-P4.58-LS9.9-TL | U5, U9 |
| 1 | ARDUINO_NANO | LSR_drone:COMM-TH_ARDUINO_NANO | U18 |
| 1 | NRF24L01 | LSR_drone:WIRELM-SMD_NRF24L01 | MK2 |
| 1 | XT30UPB-M | LSR_drone:CONN-TH_XT30UPB-M | CN2 |
Similar boards
- 2 layers214 × 187.9 mm
Line follower simple
alientanya/line-follower-PCB
A modular PCB platform for Fast Line Follower (FLF) robots, designed to prioritize sensor experimentation and component flexibility.
259 parts2MIT - 4 layers135 × 84 mm
Stepper with TMC2209 controller board V1
JasonHEngineering/DIY-Robot-Arm-V3
1) Along with using with TMC2209 motor drivers, I have removed R8, R15, R16, R17, R18, R19 because the R value was accidentally too high. I have shorted R8, R16, R17, and left open R15, R18, R19.
95 parts2 - 4 layers88.9 × 57.8 mm
- 4 layers70 × 70 mm
- 4 layers101 × 51.5 mm
Quack core
HeyPCB/quack-core
Brain board for the Open Duck Mini: Pi Zero 2W carrier, 14-servo STS bus, fused 2S power path in stitched copper zones (15-18 A battery side), USB-C charging with balancing, IMU.
138 parts1CERN-OHL-S-2.0 - 2 layers50 × 35 mm
M5stack board unitree brushless digital servo
kim-xps12/m5stack_board_unitree_brushless_digital_servo
Unitree Servo UART Board for M5Stack: auto-direction 4 Mbps half-duplex TTL bus for Unitree J288 / S288 brushless digital servos (KiCad 9, JLCPCB PCBA)
29 parts1MIT - 2 layers101.9 × 101.9 mm
Tejas
Rujul-Rumale/INSPACe-CanSat-Team-Tejas-PCB-Design
Onboard computer PCB for the INSPACe Team Tejas CanSat — Teensy 4.1 + XBee + sensor suite, designed in KiCad. Schematic, layout, Gerbers, 3D renders and libraries.
34 parts1
Questions
How big is the LSR drone PCB?
It measures 60 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LSR drone use?
15 parts, built around the NRF24L01, L293D and XT30UPB-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LSR drone KiCad files?
From the ryanabraham1/LSR-drone repository on GitHub, at the commit this page was made from: the board is LSR_drone.kicad_pcb and its schematic LSR_drone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LSR drone design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).