2 layers23 × 120 mm
2 layers31 × 62 mm
Rlcontroller
rujxtastic/rlcontrollera controller for Rocket League based entirely around piloting the Octane.
- Size
- 31 × 62 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 34
- Pads
- 68
- Tracks, vias
- 216, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Mar 2026
- Updated
- 27 Jun 2026
Overview
Rlcontroller is an open-source printed circuit board by rujxtastic, from the rujxtastic/rlcontroller repository on GitHub, published under the MIT licence. It is a 2-layer board of 31 × 62 mm with 15 parts on 34 nets, routed with 216 tracks and 0 vias.
It is built around the MPU-6050. Its parts include 5 switches, 4 capacitors, 2 resistors, 2 ICs and 1 connector.
Main components
1README
PCB/README.mdPCB
This is the PCB (Printed Circuit Board) files, which broadcast the controller's acceleration and angle to the computer.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C4 |
| 2 | 4700 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | 0.01uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 2200uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | BL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | BR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW5 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | FL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | FR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW4 |
| 1 | Hood | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW3 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 1 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | On/Off |
| 1 | WEMOS_C3_mini | RF_Module:WEMOS_C3_mini | U1 |
Questions
How big is the Rlcontroller PCB?
It measures 31 × 62 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rlcontroller use?
15 parts, built around the MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rlcontroller KiCad files?
From the rujxtastic/rlcontroller repository on GitHub, at the commit this page was made from: the board is PCB/rlcontroller.kicad_pcb and its schematic PCB/rlcontroller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rlcontroller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers95 × 50 mm
Control board
ZhuYanzhen1/MM32_CLion
本项目是全国大学生智能车竞赛GDUT 2022年极速越野组的项目文件。采用了LQR控制器和多速率卡尔曼融合算法，并在单片机上实现。This project is the project document for the GDUT 2022 Extreme Off-Road Category of the National Student Intelligent Vehicle Competition.
129 parts58AGPL-3.0 - 2 layers50 × 66 mm
- 2 layers36 × 43 mm
Asac fc rev a
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying
119 parts52GPL-3.0 - 4 layers305 × 208.3 mm
- 2 layers98.5 × 17.8 mm
- 2 layers36.2 × 36.2 mm
- 2 layers26 × 21.3 mm
PModBoard
pms67/PModlet
PMOD PCB with USB-to-UART converter and IMU (MPU-6050, I2C) for FPGAs.
19 parts15MIT