2 layers61.5 × 32 mm
MSMP MPU6050
divs27-xgb/MSMP0-MPU6050-Board
A Custom designed PCB for learning and experiment purposes
40 parts
2 layers26 × 21.3 mm
PModBoard
pms67/PModlet15PMOD PCB with USB-to-UART converter and IMU (MPU-6050, I2C) for FPGAs.
- Size
- 26 × 21.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 19
- Pads
- 83
- Tracks, vias
- 155, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Jul 2021
- Updated
- 6 Jul 2021
Overview
PModBoard is an open-source printed circuit board by pms67, from the pms67/PModlet repository on GitHub, published under the MIT licence. It is a 2-layer board of 26 × 21.3 mm with 19 parts on 19 nets, routed with 155 tracks and 16 vias.
It is built around the CH340E and MPU-6050. Its parts include 6 capacitors, 4 resistors, 2 ICs, 2 diodes and 2 connectors.
Main components
2
CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
MPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
README
README.mdPModlet
PMOD PCB with USB-to-UART converter and IMU (MPU-6050, I2C) for FPGAs.
You can order this board (incl. SMT assembly) at https://www.jlcpcb.com/RPH. Gerber and assembly files are in the relevant repo folders.
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 2k2 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 1 | 2n2 | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Horizontal | J1 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LOGO | BluePhil-Footprints:PhilsLab-Silkscreen | G*** |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 1 | USB_B_Micro | BluePhil-Footprints:MicroXNJ | J2 |
The 17 most common of 19 parts.
Questions
How big is the PModBoard PCB?
It measures 26 × 21.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PModBoard use?
19 parts, built around the CH340E and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PModBoard KiCad files?
From the pms67/PModlet repository on GitHub, at the commit this page was made from: the board is PModBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PModBoard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers46.9 × 68.1 mm
- 4 layers45 × 41 mm
Osw
Open-Smartwatch/open-smartwatch-gps
Hardware design files for the GPS version of the open-smartwatch
70 parts243GPL-3.0 - 4 layers32 × 30 mm
- 2 layers51 × 23.1 mm
Feather rak3172
teapotlaboratories/feather-rak3172
Teapotlabs Feather RAK3172: Low-cost Low-power LoRaWAN Development Board
53 parts43MIT - 2 layers22.9 × 50.8 mm
Penguino STM32WL LoRa E5
azerimaker/Penguino-STM32WL-LoRa-E5
This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.
58 parts42 - 4 layers100 × 50 mm
- 4 layers160 × 110 mm
