
Heart board
roshanibankar/boardyard
A small corner for my PCBs. This is their favorite hangout spot! 🦋✷Δೃ࿔*:・

A small corner for my PCBs. This is their favorite hangout spot! 🦋✷Δೃ࿔*:・
Lights audio sync is an open-source printed circuit board by roshanibankar, from the roshanibankar/boardyard repository on GitHub, published under the MIT licence. It is a 2-layer board of 87 × 61 mm with 39 parts on 57 nets, routed with 390 tracks and 22 vias.
It is built around the ARDUINO UNO R3, IR2125PBF and 1N4148WT, with the IRF740 among its other parts. Its parts include 16 capacitors, 9 resistors, 4 ICs, 3 diodes and 3 transistors. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.
A small corner for my PCBs. This is their favorite hangout spot! 🦋✷Δೃ࿔*:・
reminder: add the remaining circuits from the drive later
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C6, C7, C11, C13, C14, C15 |
| 3 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C8, C9, C10 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R8, R9 |
| 3 | 1N4148WT | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3 |
| 3 | 1nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C5, C12, C16 |
| 3 | 47Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R7 |
| 3 | IR2125PBF | Package_DIP:CERDIP-8_W7.62mm_SideBrazed | U1, U2, U3 |
| 3 | IRF740 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3 |
| 2 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 1 | 0.01uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 0.3uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 200k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 33pF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | AudioJack2_Ground | Connector_Audio:Jack_3.5mm_CUI_SJ1-3523N_Horizontal | J1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | MSGEQ7 | Package_DIP:CERDIP-8_W7.62mm_SideBrazed | IC1 |

roshanibankar/boardyard
A small corner for my PCBs. This is their favorite hangout spot! 🦋✷Δೃ࿔*:・

roshanibankar/boardyard
A small corner for my PCBs. This is their favorite hangout spot! 🦋✷Δೃ࿔*:・

Niels-Clayton/self-tuning-buck-converter
Variable frequency and PWM buck converter, controlling for both output voltage and inductor ripple current of the converter.


b3nn/3DVisionAVR-Hardware
Hardware design files and info for 3DVisionAVR, a clone for 3D Vision Emitter using IR


SonOfCheevap/PierogiNixie-PSU
A simple 12v to 150v-250v DC-DC Power supply for use with nixie tubes.

CatoLynx/LAWO-Arduino
Arduino Nano adapter board for LAWO XY5 flipdot displays


It measures 87 × 61 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the ARDUINO UNO R3, IR2125PBF, 1N4148WT and IRF740. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the roshanibankar/boardyard repository on GitHub, at the commit this page was made from: the board is lights-audio-sync/lights-audio-sync.kicad_pcb and its schematic Valentine's-heart-pcb/heart-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).