

Outdr
Sensor project hardware - ESP32-S3 base board, light and air sensors
- Size
- 25 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 15
- Pads
- 56
- Tracks, vias
- 110, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Aug 2025
- Updated
- 5 Nov 2026
Overview
Outdr is an open-source printed circuit board by romkey, from the romkey/sensr repository on GitHub, published under the MIT licence. It is a 2-layer board of 25 × 20 mm with 18 parts on 15 nets, routed with 110 tracks and 14 vias.
It is built around the TSL25911FN, CL21B104KBCNNNC and SM04B-SRSS-TB(LF)(SN), with the CL21A106KOQNNNE and 0805W8F3304 among its other parts. Its parts include 4 capacitors, 4 resistors, 2 ICs, 2 connectors and 1 diode.
Main components
5TSL25911FN
DFN-6(2x2.2)-30℃~+70℃ 2.7V~3.6V I2C Light Intensity DFN-6(2x2.2) Ambient Light Sensors ROHSAdvanced Monolithic SystemsAmbient Light SensorsCL21B104KBCNNNC
0805100nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTSM04B-SRSS-TB(LF)(SN)
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x4P 2.9mm 4 4.32mm 4P 50V 6mm Auxiliary Solder Pin Copper alloy PA SH Surface Mount, Right Angle Tin UL94V-0 White SMD,P=1mm,卧贴 Wire To Board Connector ROHSJSTWire To Board ConnectorCL21A106KOQNNNE
080510uF 16V X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT0805W8F3304
0805-55℃~+155℃ 125mW 150V 3.3MΩ Thick Film Resistor ±1% ±100ppm/℃ 0805 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount
README
README.mdSensr
Sensr is a group of hardware projects intended for environmental sensing.
It currently consists of:
- base board - ESP32-S3 with accelerometer, I2S microphone header, display header, 2 Qwiic ports, particle counter connector
- air - SCD40 CO2 + BME680 temperature/humidity/pressure sensor
- air-stcc4 - new STCC4 CO2 sensor + SHT40 temperature/humidity sensor
- light - TSL25911 light
- light-ltr390uv - LTR390 UV sensor + TSL25911 light sensor
Sensr is an ESP32 S3-based microcontroller intended for environmental sensing, as well as separate sensor boards.
I2C Addresses
0x29 TSL25911 0x74 AS7331 0x49 AS7341 0x53 LT-390
0x76 BME680 0x62 SCD40 0x59 SGP40 0x5D SFA30 0x44 SHT3X-D
0x6A LSM6DS3TR-C
Gas: 0x64 0x65 0x66 0x67 0x68 0x69 0x6B
bodged I2S
SCK - CS - 10 SD - RESET - 9 WS - DC - 46 L/R - SDI (MOSI) - 16
License
Hardware is shared under the CERN-OHL-S-2.0 license.
Software is shared under the MIT license.
Documentation is shared under the CC-BY-SA-4.0 - Attribution-ShareAlike license.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | M1, M2, M3, M4 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 2 | SM04B-SRSS-TB_(LF)(SN) | footprint:CONN-SMD_4P-P1.00_SM04B-SRSS-TB-LF-SN | J1, J2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 3.3MΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | AS7331 | EasyEDA:OLGA-16_L3.7-W2.6-P0.50-TL_AS7331-AQFM | U2 |
| 1 | PWR | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | TSL25911FN | EasyEDA:DFN-6_L2.4-W2.0-P0.65-BL | U1 |
The 17 most common of 18 parts.
More from romkey/sensr
7- 2 layers142 × 208 mm

- 2 layers133 × 20 mm

- 2 layers70 × 40 mm

- 2 layers40 × 40 mm

Occupancy
romkey/sensr
Sensor project hardware - ESP32-S3 base board, light and air sensors
35 partsMIT - 2 layers30 × 30 mm

- 2 layers25 × 20 mm

Air stcc4
romkey/sensr
Sensor project hardware - ESP32-S3 base board, light and air sensors
18 partsMIT - 2 layers25 × 20 mm

Light ltr-390-uv
romkey/sensr
Sensor project hardware - ESP32-S3 base board, light and air sensors
18 partsMIT
Similar boards
- 2 layers140 × 105.5 mm

- 2 layers80 × 70 mm

- 4 layers60 × 80 mm

Wisp
huulanka/wisp
Open-source ESP32 room climate monitor — CO2, VOC, humidity, temperature and light sensing with custom PCB, MQTT/HomeKit integration, and OTA firmware updates. Full hardware + software, from schematic to BOM.
91 partsMIT - 2 layers42.5 × 38.1 mm

- 2 layers59.7 × 26.7 mm

- 4 layers54.4 × 53.3 mm

- 2 layers100 × 100 mm

- 2 layers20 × 18 mm

Questions
How big is the Outdr PCB?
It measures 25 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Outdr use?
18 parts, built around the TSL25911FN, CL21B104KBCNNNC, SM04B-SRSS-TB(LF)(SN) and CL21A106KOQNNNE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Outdr KiCad files?
From the romkey/sensr repository on GitHub, at the commit this page was made from: the board is hw/light/0.1/Outdr.kicad_pcb and its schematic hw/air-stcc4/0.1.0/air-stcc4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Outdr design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).