
Display breakout
Kriegbaum/oled-breakout
Breakout board for Crystalfontz 128x128 Oled display

Breakout board for Feasy bt1036c bluetooth audio module
Bt1036c is an open-source printed circuit board by Kriegbaum, from the Kriegbaum/bt1036c-breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 42.5 × 38.1 mm with 17 parts on 50 nets, routed with 106 tracks and 20 vias.
It is built around the RNCP0805FTD1K00, SJ1-3523N and CL21A106KOQNNNE, with the CL21B104KBCNNNC, QBLP615-IB and QBLP615-R among its other parts. Its parts include 6 connectors, 2 capacitors, 2 resistors and 1 IC.
Breakout board for Feasy bt1036c bluetooth audio module
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J4, J6 |
| 2 | RNCP0805FTD1K00 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | SJ1-3523N | dowloaded_parts:Jack_3.5mm_CUI_SJ1-3523N_Horizontal | J1, J2 |
| 1 | |||
| 1 | CL21A106KOQNNNE | dowloaded_parts:0805_cap | C1 |
| 1 | CL21B104KBCNNNC | dowloaded_parts:0805_cap | C2 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | FSC-BT1036C | dowloaded_parts:fsc-bt1036c | U1 |
| 1 | QBLP615-IB | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | PAIRING1 |
| 1 | QBLP615-R | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | PWR1 |
The 14 most common of 17 parts.

Kriegbaum/oled-breakout
Breakout board for Crystalfontz 128x128 Oled display



FugLong/OpenChord
An open-source music device for portable, expressive, and extensible audio creation.



huulanka/wisp
Open-source ESP32 room climate monitor — CO2, VOC, humidity, temperature and light sensing with custom PCB, MQTT/HomeKit integration, and OTA firmware updates. Full hardware + software, from schematic to BOM.

It measures 42.5 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the RNCP0805FTD1K00, SJ1-3523N, CL21A106KOQNNNE and CL21B104KBCNNNC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Kriegbaum/bt1036c-breakout repository on GitHub, at the commit this page was made from: the board is bt1036c.kicad_pcb and its schematic bt1036c.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).