

Air
Sensor project hardware - ESP32-S3 base board, light and air sensors
- Size
- 30 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 24
- Pads
- 65
- Tracks, vias
- 105, 14
- Pours
- 70
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Aug 2025
- Updated
- 5 Nov 2026
Overview
Air is an open-source printed circuit board by romkey, from the romkey/sensr repository on GitHub, published under the MIT licence. It is a 2-layer board of 30 × 30 mm with 19 parts on 24 nets, routed with 105 tracks and 14 vias.
It is built around the BME680, C2012X5R1V106KT0J0E and RC0805JR-4K7L, with the SM04B-SRSS-TB(LF)(SN), CL21B104KBCNNNC and 0805B473K500NT among its other parts. Its parts include 4 capacitors, 3 resistors, 3 connectors, 2 ICs and 1 diode.
Main components
6BME680
LGA-8-40℃~+85℃ 0.12hpa 0.6hpa 1.3pa/K 1.71V~3.6V 150nA 30Kpa~1.1bar I2C、SPI Temperature Sensor LGA-8 Pressure Sensors ROHSBosch SensortecPressure SensorsC2012X5R1V106KT0J0E
080510uF 35V X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTDKMultilayer Ceramic Capacitors MLCC - SMD/SMTRC0805JR-4K7L
0805-55℃~+155℃ 125mW 150V 4.7kΩ Thick Film Resistor ±100ppm/℃ ±5% 0805 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountSM04B-SRSS-TB(LF)(SN)
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x4P 2.9mm 4 4.32mm 4P 50V 6mm Auxiliary Solder Pin Copper alloy PA SH Surface Mount, Right Angle Tin UL94V-0 White SMD,P=1mm,卧贴 Wire To Board Connector ROHSJSTWire To Board ConnectorCL21B104KBCNNNC
0805100nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT0805B473K500NT
080547nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSGuangdong Fenghua Advanced Tech (FH)Multilayer Ceramic Capacitors MLCC - SMD/SMT
README
README.mdSensr
Sensr is a group of hardware projects intended for environmental sensing.
It currently consists of:
- base board - ESP32-S3 with accelerometer, I2S microphone header, display header, 2 Qwiic ports, particle counter connector
- air - SCD40 CO2 + BME680 temperature/humidity/pressure sensor
- air-stcc4 - new STCC4 CO2 sensor + SHT40 temperature/humidity sensor
- light - TSL25911 light
- light-ltr390uv - LTR390 UV sensor + TSL25911 light sensor
Sensr is an ESP32 S3-based microcontroller intended for environmental sensing, as well as separate sensor boards.
I2C Addresses
0x29 TSL25911 0x74 AS7331 0x49 AS7341 0x53 LT-390
0x76 BME680 0x62 SCD40 0x59 SGP40 0x5D SFA30 0x44 SHT3X-D
0x6A LSM6DS3TR-C
Gas: 0x64 0x65 0x66 0x67 0x68 0x69 0x6B
bodged I2S
SCK - CS - 10 SD - RESET - 9 WS - DC - 46 L/R - SDI (MOSI) - 16
License
Hardware is shared under the CERN-OHL-S-2.0 license.
Software is shared under the MIT license.
Documentation is shared under the CC-BY-SA-4.0 - Attribution-ShareAlike license.
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | M1, M2, M3, M4 |
| 2 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | SM04B-SRSS-TB_(LF)(SN) | footprint:CONN-SMD_4P-P1.00_SM04B-SRSS-TB-LF-SN | J1, J2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 47nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | BME680 | Package_LGA:Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering | U2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | PWR | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | SCD40 | footprint:LGA-20_L10.1-W10.1-P1.25-TL | U1 |
The 17 most common of 19 parts.
More from romkey/sensr
7- 2 layers142 × 208 mm

- 2 layers133 × 20 mm

- 2 layers70 × 40 mm

- 2 layers40 × 40 mm

Occupancy
romkey/sensr
Sensor project hardware - ESP32-S3 base board, light and air sensors
35 partsMIT - 2 layers25 × 20 mm

Air stcc4
romkey/sensr
Sensor project hardware - ESP32-S3 base board, light and air sensors
18 partsMIT - 2 layers25 × 20 mm

Light ltr-390-uv
romkey/sensr
Sensor project hardware - ESP32-S3 base board, light and air sensors
18 partsMIT - 2 layers25 × 20 mm

Similar boards
- 2 layers71.8 × 62.2 mm

Air quality pcb v7
NilsEngelbach/air-quality-pcb
Seventh iteration: ESP8266 → ESP32-C3 (native USB, no UART bridge), fixes from the v6 design review, right-angle switches with longer actuators, a STEMMA QT port for optional sensors, and charge-status sensing.
85 parts - 2 layers97.5 × 79 mm

RGB LED Driver
PCB-Design-MIT/Wi-Fi-Controlled-RGB-Light
A demo board for students to learn to solder and debug
144 parts4 - 2 layers90 × 100 mm

Meshcore NaIon
Alksndr55/mesh-repeater
Mesh Repeater v1 — одноплатный LoRa-репитер для MeshCore и Meshtastic, 90×100 мм. Упор на максимальное энергосбережение и работу в суровых сибирских зимах. Солнечный зарядник, Na-ion 1S / LTO 2S.
154 parts3 - 2 layers50.8 × 81.3 mm

Burrboard
drogue-iot/burrboard
This repository contains prototyping boards for RH summit, aka burrboards, firmware running on the burrboard feathers, and the software around it
34 parts3Apache-2.0 - 2 layers61.7 × 50.5 mm

Drone HW
jaoRamalho/Drone
This project integrated hardware, firmware, and software to create a drone controlled by hand motion capture, turning gestures into flight commands.
34 parts3 - 2 layers100 × 100 mm

- 2 layers140 × 105.5 mm

- 4 layers60 × 40 mm

B BQ24650-BRK R1.0
Boardoza/SenseTech-Competition-2026
Bu repo, Boardoza SenseTech 2026 yarışmasında kullanılacak kartların kaynak repolarını bir arada tutmak için oluşturulmuştur.
65 parts1
Questions
How big is the Air PCB?
It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Air use?
19 parts, built around the BME680, C2012X5R1V106KT0J0E, RC0805JR-4K7L and SM04B-SRSS-TB(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Air KiCad files?
From the romkey/sensr repository on GitHub, at the commit this page was made from: the board is hw/air/0.2/air.kicad_pcb and its schematic hw/air-stcc4/0.1.0/air-stcc4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Air design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).