
Mk2 routed
Woz4tetra/auto-battlebot
This project brings aim-assist and autonomous control to combat robots.

BNO055 breakout board with Stemma QT style connector
Ez bno055 is an open-source printed circuit board by rohamid, from the rohamid/ez-bno055-master repository on GitHub. It is a 2-layer board of 20.4 × 30 mm with 29 parts on 25 nets, routed with 167 tracks and 29 vias.
It is built around the AP2112K-3.3 and BNO055. Its parts include 8 capacitors, 7 resistors, 4 connectors, 2 ICs and 1 diode.
BNO055 sensor breakout board with Adafruit's Stemma QT style connector. All pin and I2C connector is similar to the Adafruit's BNO055 breakout board to ensure the compatibility.



| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C5, C6 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R5, R6, R7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 2K2 | Resistor_SMD:R_0402_1005Metric | R1, R2, R4 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1, J2 |
| 2 | I2C | SM04B-SRSS-TB_LF__SN_:JST_SM04B-SRSS-TB_LF__SN_ | J3, J4 |
| 2 | JMP | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | BNO055 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |

Woz4tetra/auto-battlebot
This project brings aim-assist and autonomous control to combat robots.

mjhaahr/RGB-LED-Pendant
Small RGB LED Pendant using 1010 (1.0x1.0mm) WS2812B LEDs powered by an ESP32-C3 Mini with a BNO055 IMU

ShekharShwetank/Breakout_Boards
Custom Breakout Board files that I needed (since couldn't find these specific ones) to be used in EDA tools like KiCAD, or Altium Designer while working as Electronics Lead of Enthalpy (Student Rocketry Team) or while…



brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera


It measures 20.4 × 30 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the AP2112K-3.3 and BNO055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rohamid/ez-bno055-master repository on GitHub, at the commit this page was made from: the board is ez-bno055.kicad_pcb and its schematic ez-bno055.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rohamid before reusing the design.