

Calc v2
- Size
- 100 × 111.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 114
- Pads
- 525
- Tracks, vias
- 579, 24
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 21 Sep 2026
- Updated
- 24 Oct 2026
Overview
Calc v2 is an open-source printed circuit board by rod520, from the rod520/calc-v2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 111.4 mm with 100 parts on 114 nets, routed with 579 tracks and 24 vias.
It is built around the RP2350B, ISL91107IRTNZ-T and TPS92200D2DDC, with the BQ24074RGTR, ABM8-272-T3 and AOTA-B201610S3R3-101-T among its other parts. Its parts include 49 switches, 27 capacitors, 13 resistors, 4 ICs and 3 inductors. It belongs with the RP2350 boards of this library.
Main components
6RP2350B
QFN-80-EP(10x10)48 Power-on reset (POR)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Integrated LDO、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG) QFN-80-EP(10x10) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)ISL91107IRTNZ-T
TQFN-20-EP(3x4)-40℃~+85℃@(TA) 1 1.8V~5.5V 2.5MHz 2A 3.3V Buck-Boost Buck-Boost Built-in Fixed Yes TQFN-20-EP(3x4) DC-DC Converters ROHSRenesas ElectronicsDC-DC ConvertersTPS92200D2DDC
SOT-23-6-40℃~+125℃ 1 1.5A 1MHz 3% 4V~30V Analog Buck Built-in DC-DC Short-Circuit Protection、LED open circuit protection、Built-in soft start SOT-23-6 LED Drivers ROHSTexas InstrumentsLED DriversBQ24074RGTR
QFN-16-EP(3x3)-40℃~+125℃ 1 1.5A 4.2V 4.35V~10.2V 6.5uA Charging IC Lithium Battery Not supported Support QFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery ManagementABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystalsAOTA-B201610S3R3-101-T
0806115mΩ 2.1A 2.4A 3.3uH Molded inductor 0806 Molding Power Inductors ROHSAbraconPower Inductors
README
README.mdcalc-v2
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 49 | SW_Push_45deg | AAAAA:SW_TS04-66-43-BK-100-SMT | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +33 |
| 13 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C7, C9, C10, C11, C12, C13, C14, C15, C16, C17, C19, C31 |
| 7 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C2, C3, C6, C8, C24, C25, C33 |
| 3 | 22u | Capacitor_SMD:C_0402_1005Metric | C35, C36, C37 |
| 3 | 46k4 | Resistor_SMD:R_0201_0603Metric | R11, R12, R13 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C18, C38 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 27 | Resistor_SMD:R_0201_0603Metric | R3, R4 |
| 2 | 5.1K | Resistor_SMD:R_0201_0603Metric | R5, R6 |
| 1 | 0.33 | Resistor_SMD:R_0201_0603Metric | R14 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric | R7 |
| 1 | 10u | Inductor_SMD:L_0201_0603Metric | L2 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1u | Inductor_SMD:L_0201_0603Metric | L3 |
| 1 | 2k | Resistor_SMD:R_0201_0603Metric | R8 |
| 1 | 3.09k | Resistor_SMD:R_0201_0603Metric | R9 |
| 1 | 33 | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | ABM8-272-T3 | AAAAA:ABM8272T3 | Y1 |
| 1 | AOTA-B201610S3R3-101-T | AAAAA:AOTAB201610S3R3101T | L1 |
| 1 | BQ24074RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U3 |
| 1 | Conn_01x02_MountingPin | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | E26RE-RW300-N | AAAAA:HRS_FH12-45S-0.5SH_55_ | DS1 |
| 1 | ISL91107IRTNZ-T | AAAAA:QFN50P300X400X80-21N | IC1 |
| 1 | RP2350B | Package_DFN_QFN:QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm | U5 |
| 1 | TPS92200D2DDC | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
More from rod520/calc-v2
1- 2 layers100 × 160 mm

Similar boards
- 4 layers89 × 61 mm

- 2 layers90 × 100 mm

- 4 layers50 × 70 mm

- 4 layers49.3 × 51.8 mm

Mega
1vers1on/Mega
A microcontroller based on the RP2350B with a dedicated dac and adc, plus wifi and bluetooth.
52 parts - 4 layers100 × 100 mm

FarmMesh Node
chinawrj/FarmMesh-Node
Developing an integrated hardware and software solution for farm-wide Mesh networking: RP2350B/ESP32-C5 nodes, firmware, network protocols, and Wi-Fi/BLE sensor access.
164 parts - 4 layers68.6 × 56 mm

Cartridge
coco-chameleon/chameleon-hardware
TRS-80 Color Computer cartridge emulator
95 partsCERN-OHL-W-2.0 - 4 layers50 × 110 mm

- 4 layers100 × 70 mm

Data port x4
kartben/hw-testing-rack
3D-printed, tilted test shelf for 16 dev boards: sliding drawers, per-bay ESP32-S3 running Zephyr (USB/IP, power switching, metering), KiCad PCBs, OpenSCAD parts, BOM and an interactive 3D viewer
290 parts
Questions
How big is the Calc v2 PCB?
It measures 100 × 111.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Calc v2 use?
100 parts, built around the RP2350B, ISL91107IRTNZ-T, TPS92200D2DDC and BQ24074RGTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Calc v2 KiCad files?
From the rod520/calc-v2 repository on GitHub, at the commit this page was made from: the board is calc-v2.kicad_pcb and its schematic _restore_backup_2026-09-25T18-59-55-822/calc-v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Calc v2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).