8 layers50 × 50 mm
4 layers150 × 150 mm
Carrier basic
robotman2412/pixieboard- Size
- 150 × 150 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 302
- Pads
- 442
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Apr 2024
- Updated
- 10 Jul 2025
Overview
Carrier basic is an open-source printed circuit board by robotman2412, from the robotman2412/pixieboard repository on GitHub. It is a 4-layer board of 150 × 150 mm with 25 parts on 302 nets.
It is built around the TF-01A and TYPE-C-31-M-12.
Main components
2
TF-01A
SMD1.85mm Connector and Ejector MicroSD Card (TF Card) Push-Push With Locating Pins SMD SD Card / Memory Card Connector ROHSHRO ElectronicsSD Card / Memory Card Connector
TYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Conn_02x20_Counter_Clockwise | Mezzanine:YXT-BB10-40S-02 | J1, J2, J3, J4, J5, J6, J7 |
| 6 | Conn_02x06_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Horizontal | J8, J9, J10, J11, J12, J13 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4mm_Pad | H5, H6, H7, H8 |
| 1 | DDMRH15PFE006 | easyeda:DSUB-TH_15P-P2.29-H-F_DDMRH15PFE006 | DSub1 |
| 1 | TF-01A | easyeda:TF-SMD_TF-01A | Card1 |
| 1 | TYPE-C-31-M-12 | easyeda:USB-C_SMD-TYPE-C-31-M-12 | USBC1 |
The 24 most common of 25 parts.
Questions
How big is the Carrier basic PCB?
It measures 150 × 150 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Carrier basic use?
25 parts, built around the TF-01A and TYPE-C-31-M-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Carrier basic KiCad files?
From the robotman2412/pixieboard repository on GitHub, at the commit this page was made from: the board is carrier-basic/carrier-basic.kicad_pcb and its schematic carrier-basic/carrier-basic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Carrier basic design in my own project?
Its repository states no licence, so its author keeps all rights: ask robotman2412 before reusing the design.
More from robotman2412/pixieboard
1Similar boards
- 6 layers100 × 120 mm
Astra piNas
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
176 parts30 - 4 layers62.9 × 88.6 mm
Bit block
Citrullin/Sovereign_Bunny_Stack
From web 3 unicorn fantasy to federated web 2.5 reality.
169 parts4 - 4 layers64 × 77 mm
OBSPro
FabianSchwartau/OBSPro
Version of the OpenBikeSensor hardware optimized for PCBA
131 parts3LGPL-2.1 - 2 layers58 × 48 mm
- 4 layers64.1 × 72.8 mm
BeeFASYER SPARROW
beewarden/BeeFASYER_SPARROW
Each BEEFASYER monitoring network is centered on exactly one Sparrow.
142 parts1CERN-OHL-S-2.0 - 6 layers90 × 89 mm
Modular processing board
igorwolfs/modular-processing-hw
MCU Breakout board with Hirose BM28B connector
177 parts1 - 6 layers60 × 60 mm
- 2 layers35.9 × 62.7 mm
Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241