Skip to the content
4 layers64 × 77 mmOBSPro, the printed circuit board in 3D

Version of the OpenBikeSensor hardware optimized for PCBA

Size
64 × 77 mm
Copper layers
4
Thickness
1.61 mm
Parts
131
Nets
145
Pads
452
Tracks, vias
714, 247
Pours
37
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Oct 2022
Updated
20 Jan 2026

Overview

OBSPro is an open-source printed circuit board by FabianSchwartau, from the FabianSchwartau/OBSPro repository on GitHub, published under the LGPL-2.1 licence. It is a 4-layer board of 64 × 77 mm with 131 parts on 145 nets, routed with 714 tracks and 247 vias.

It is built around the CP2102-GMR, ESP32-WROOM-32 and MAX-M10M-00B, with the PGA460TPWRQ1, TLV61048DBV and TF-01A among its other parts. Its parts include 42 resistors, 37 capacitors, 10 ICs, 7 diodes and 6 transistors. It belongs with the ESP32 boards of this library.

Main components

12

README

README.md

OBSPro

This is a different version of the OpenBikeSensor main PCB (checkout https://github.com/openbikesensor/OpenBikeSensor_PCB_Board) with a few design goals:

  • Optimized for pick-and-place manufacturing. This means no modules for each functionality, everything is on a single board and SMD parts are used.
  • Parts only from trustworthy and reliable sources. This also includes that it should be possible to order these parts with a proper bill.
  • Software compatibility as far as possible with the original hardware/software.

PCBA

At the moment we are aiming to get almost all parts from LCSC/JLCPCB, which is a good mixture of trustworthiness/reliability and price. JLC also offers a PCB assemby service, which is used. If you only want one or two boards, it is probably not woth it, but for larger orders it makes perfect sense.

GPS

There are multiple options for the GPS module. You can use any MAX-8* or MAX-10* from u-blox, which cost around 20€ for single quantities. The pinout is also compatible with the ATGM336H-5N* modules from Zhongkewei. It only costs around 5€, but the performance still needs to be evaluated.

BOM

Here is a list of parts and potential sources you will need besides the parts listed in the BOM file of the PCB itself.

  • THT PCB parts
    • These are also included in the PCB BOM, but not populated by us in the kit.
    • 1x display jack:
      • JST- S5B-XH-A(LF)(SN): LCSC
    • 1x power switch jack:
      • JST - S2B-XH-A(LF)(SN): LCSC
    • 1x battery jack:
      • XKB Connection - X2510WR-02-N0SN: LCSC
    • 2x ultrasonic transducer
      • HYDZ: HY40A16T12-1: LCSC
  • GPS antenna
    • BAT WIRELESS - BWGNSCNX25-25B1Y2L120: LCSC
  • Battery
    • Probably any 18650 style Lipo battery will do. As you need to solder the connectors to the battery, one with U-shaped strips already attached is recommended.
    • Samsung - INR18650-20R akkuteile.de
    • Multiple: akkuservice-krueger.de (you can select with solder strip for each battery)
  • Battery cable + connector + crimp contacts
    • 1x complete assembly: XKB Connection - X2510T-02-PSN-A22RB-L300-T5: LCSC (if you buy this, you do not need the parts below)
    • 1x connector: XKB Connection - X2510H-02-N0: LCSC
    • 2x crimp contacts: XKB Connection - X2510T-PSN: LCSC
    • 2x cable (use any ~0.25mm² cable you can find, same for power switch connector)
  • 2x zip ties
    • Maximum width: 4.5 mm, minimum length: 70 mm.
    • LCSC, LCSC, LCSC, your local hardware store, ...
  • 1x Power switch
    • YUEN FUNG - MT-0-102-A101-M200-RS: LCSC
  • Power switch cable + connector + crimp contacts
    • 1x complete assembly: SHOU HAN - 2.54-2P DT 200mm 24AWG: LCSC (if you buy this, you do not need the parts below)
    • 1x connector: JST - XHP-2: LCSC
    • 2x crimp contacts: JST - SXH-001T-P0.6: LCSC (same for the display connector!)
    • 2x cable (use any ~0.25mm² cable you can find, same for battery connector)
  • 1x SD card
    • MK - MKUS128M-IGT1: LCSC
    • SDTRUVAL - SDSDQAB-128M-SDWHA: LCSC
  • 8x Threaded insert nuts M3, ~5mm length, ~4.2mm outer diameter
  • 14x M3x8 screws (DIN912)
    • Used for: 4x main housing, 4x PCB, 3x display housing, 2x display cable strain relive, 4x main housing mounting.
    • Multiple: Gedex, LCSC, LCSC, LCSC
  • 1x M3x30 screw (DIN912)
    • Used for the locking pin.
    • Multiple: Gedex, LCSC
  • 6x M3 nuts (DIN934)
    • Used for: 4x main housing mount, 2x cable strain relief for display unit.
    • Multiple: Gedex, LCSC
  • Display cable + connector + crimp contacts
    • 1x complete assembly: TBD (if you buy this, you do not need the parts below)
    • 1x connector: JST - XHP-5: LCSC, LCSC
    • 2x crimp contacts: JST - SXH-001T-P0.6: LCSC (same for the power switch connector!)
    • 1x 2m cable: Lapp - Unitronic Sensor LIFY11Y 5x0.25 7038862: automation24.de
  • 1x OLED Display
  • 1x Display button
  • 2x Display magnets
  • 3D printed parts

Current preview

Here is an image of the current board. The parts are roughly placed and a small part is routed. Also there are a bunch of 3D models still missing.

Software

TODO: Link to the software and how to flash the device.

Parts

131
QtyValueFootprintReferences
17100nCapacitor_SMD:C_0603_1608MetricC1, C10, C14, C15, C17, C18, C19, C21, C22, C24, C25, C26, C28, C31, C32, C33 +1
1010uCapacitor_SMD:C_0603_1608MetricC2, C3, C4, C5, C6, C7, C8, C11, C12, C16
910kResistor_SMD:R_0603_1608MetricR8, R9, R14, R20, R21, R22, R23, R30, R42
768Resistor_SMD:R_0603_1608MetricR16, R17, R18, R19, R24, R25, R26
5100Resistor_SMD:R_0603_1608MetricR1, R33, R34, R38, R39
4FiducialFiducial:Fiducial_0.5mm_Mask1.5mmFID1, FID2, FID3, FID4
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
310Resistor_SMD:R_0603_1608MetricR31, R32, R37
31uCapacitor_SMD:C_0603_1608MetricC9, C13, C20
3LEDLED_SMD:LED_0603_1608MetricD2, D3, D7
20RResistor_SMD:R_0603_1608MetricR35, R40
21Resistor_SMD:R_0603_1608MetricR5, R6
21.24kResistor_SMD:R_0603_1608MetricR2, R11
21.5nCapacitor_SMD:C_0603_1608MetricC30, C37
2100kResistor_SMD:R_0603_1608MetricR10, R13
2100uCapacitor_SMD:CP_Elec_6.3x5.2C29, C36
210uInductor_SMD:L_Changjiang_FNR6045SL1, L2
21kInductor_SMD:L_0603_1608MetricFB1, FB2
22.7kResistor_SMD:R_0603_1608MetricR36, R41
2390pCapacitor_SMD:C_0603_1608MetricC27, C34
25.1kResistor_SMD:R_0603_1608MetricR3, R4
2B78416A2232A003OBSPro:B78416AxA003T1, T2
2BSS123Package_TO_SOT_SMD:SOT-23Q5, Q6
2D_SmallDiode_SMD:D_SOD-123FD5, D6
2HY40A16T12-1OBSPro:HY40A16T12LS1, LS2
2PGA460TPWRPackage_SO:TSSOP-16_4.4x5mm_P0.65mmU9, U10
2S8050Package_TO_SOT_SMD:SOT-23Q3, Q4
2SI2302Package_TO_SOT_SMD:SOT-23Q1, Q2
2TestPointTestPoint:TestPoint_Pad_1.0x1.0mmTP1, TP2
110nCapacitor_SMD:C_0603_1608MetricC23
1150kResistor_SMD:R_0603_1608MetricR27
11AFuse:Fuse_0603_1608MetricF1
11kResistor_SMD:R_0603_1608MetricR7
127nInductor_SMD:L_0603_1608MetricL3
13.9kResistor_SMD:R_0603_1608MetricR12
1300kResistor_SMD:R_0603_1608MetricR28
14.7kResistor_SMD:R_0603_1608MetricR15
162kResistor_SMD:R_0603_1608MetricR29
1B540C-13-FDiode_SMD:D_SMCD4
1BOOTButton_Switch_SMD:SW_SPST_CK_RS282G05A3SW1
1CP2102NPackage_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mmU6
1D_SmallDiode_SMD:D_SMAD1
1Display CableConnector_JST:JST_XH_S5B-XH-A_1x05_P2.50mm_HorizontalJ5
1ESP32-WROOM-32OBSPro:ESP32-WROOM-32U7
1FM2113Package_TO_SOT_SMD:SOT-23-6U1
1JW5026Package_TO_SOT_SMD:SOT-23-6U4
1LGS4056HEPOBSPro:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mmU3
1LiPoOBSPro:PSS-254-2WJ1
1MAX-M10MOBSPro:ublox_MAXU8
1MKFS_LogoOBSPro:Logo_MKFSG1
1MicroSDOBSPro:TF-01AJ4
1OBS_LogoOBSPro:OBS_LogoG2
1On/OffConnector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_HorizontalJ3
1RT9069Package_TO_SOT_SMD:SOT-23-5U2
1TLV61048Package_TO_SOT_SMD:SOT-23-6U5
1U.FL GPSConnector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_VerticalJ6
1USBOBSPro:TYPE-C-31-M-12J2

Similar boards

  • 4 layers75 × 75 mmUSAN r0, the printed circuit board in 3D

    USAN r0

    alu-source/open_USAN

    This project documents the software and hardware of an ultrasonic anemometer, created in cooperation between FH Aachen and DLR Göttingen

    262 parts1
  • 2 layers64 × 23 mmLock, the printed circuit board in 3D

    Lock

    ephemerkey/ephemerkey

    The consumer half of the ephemerkey system, and the second PCB in this repo (alongside hardware/ephemerkey/, sharing the same scripts/kschgen.py engine, Makefile, and lib tables — the multi-project layout used by…

    50 parts
  • 2 layers89 × 55.5 mmMintypcb, the printed circuit board in 3D

    Mintypcb

    jackw01/pi-tin

    Open source raspberry pi handheld retro gaming console

    129 parts75CERN-OHL-W-2.0
  • 4 layers99.8 × 99.8 mmGapstorm retro, the printed circuit board in 3D

    Gapstorm retro

    G-EDM/Gapstorm-Pro

    G-EDM Gapstorm Pro - Pulseboard PCB files including BoM, Kicad files, Gerber files and Pick&Place file

    137 parts3
  • 2 layers60 × 50 mmRobotont power management board, the printed circuit board in 3D

    Robotont power management board

    robotont/robotont-electronics-power-management-board

    KiCAD schematics and PCB layout for the power management board

    17 parts3
  • 2 layers89 × 55.5 mmMintypcb, the printed circuit board in 3D

    Mintypcb

    SophBG/pi-tin-mod

    Personal build of jackw01's Pi Tin (3D-printed clamshell version, KiCad 10). It adds 10 RGB LEDs under the buttons, a centred speaker, a USB-drive mode for the ROMs, and ESD protection on USB, and runs on an Orange Pi…

    158 parts1
  • 4 layers83 × 83 mmBlinkekatze, the printed circuit board in 3D

    Blinkekatze

    TobleMiner/blinkekatze

    Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays

    134 parts34

Questions

How big is the OBSPro PCB?

It measures 64 × 77 mm and has 4 copper layers, 1.61 mm thick.

What parts does the OBSPro use?

131 parts, built around the CP2102-GMR, ESP32-WROOM-32, MAX-M10M-00B and PGA460TPWRQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OBSPro KiCad files?

From the FabianSchwartau/OBSPro repository on GitHub, at the commit this page was made from: the board is board/OBSPro.kicad_pcb and its schematic board/OBSPro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the OBSPro design in my own project?

Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).