4 layers150 × 150 mm
8 layers50 × 50 mm
Pixieboard
robotman2412/pixieboard- Size
- 50 × 50 mm
- Copper layers
- 8
- Thickness
- 1.2 mm
- Parts
- 152
- Nets
- 377
- Pads
- 1,364
- Tracks, vias
- 4,715, 897
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Apr 2024
- Updated
- 10 Jul 2025
Overview
Pixieboard is an open-source printed circuit board by robotman2412, from the robotman2412/pixieboard repository on GitHub. It is an 8-layer board of 50 × 50 mm with 152 parts on 377 nets, routed with 4,715 tracks and 897 vias.
It is built around the XC7A200T-3FBG484E, SIC402ACD and RS3236-ADJ8YF5, with the TPS51200DRC among its other parts. Its parts include 97 capacitors, 18 resistors, 9 ICs, 7 connectors and 3 inductors. It belongs with the FPGA and CPLD boards of this library.
Main components
4XC7A200T-3FBG484E
FCBGA-4840℃~+100℃ 215360 Integrated temperature sensor、Supports SEU error detection and correction、Supports AES encryption FCBGA-484 Programmable Logic Device (CPLDs/FPGAs) ROHSAMD/XILINXProgrammable Logic Device (CPLDs/FPGAs)
SIC402ACD
MLP55-32L(5x5)-40℃~+125℃ 1 10A 160uA 200kHz~1MHz 3V~28V 600mV~21V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Adjustable current limiting、Built-in LDO regulator Step-down type Yes MLP55-32L(5x5) DC-DC Converters ROHSVishay IntertechnologyDC-DC Converters
RS3236-ADJ8YF5
SOT-23-5-40℃~+85℃@(Ta) 1 20uA 500mA 7.5V 70dB@(1kHz) 80uVrms 810mV 900mV@(500mA) Adjustable Over Current Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJiangsu RUNIC TechVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TPS51200DRC
SON103.3V Sink/Source DDR Termination RegulatorTexas InstrumentsUncategorised
Parts
152| Qty | Value | Footprint | References |
|---|---|---|---|
| 71 | 22uF | Capacitor_SMD:C_0402_1005Metric | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +55 |
| 9 | 100nF | Capacitor_SMD:C_0402_1005Metric | C33, C58, C59, C61, C94, C95, C96, C97, C99 |
| 9 | 100uF | Capacitor_SMD:C_1206_3216Metric | C63, C86, C87, C88, C89, C90, C91, C92, C93 |
| 7 | 1nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C53, C54, C55, C56, C98 |
| 7 | Conn_02x20_Counter_Clockwise | Mezzanine:YXT-BB10-40P-02 | J1, J2, J3, J4, J5, J6, J7 |
| 7 | R_Pack04 | Resistor_SMD:R_Array_Concave_4x0402 | RN1, RN2, RN3, RN4, RN5, RN6, RN7 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP4, TP5, TP6, TP7, TP8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 20K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9, R11, R15 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R17, R18 |
| 2 | 160K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14, R20 |
| 2 | 2.2uH | Inductor_SMD:L_0603_1608Metric | L3, L4 |
| 2 | 240R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 2 | 75K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6, R10 |
| 2 | AS4C256M16D3 | Package_BGA:BGA-96_9.0x13.0mm_Layout2x3x16_P0.8mm | U2, U3 |
| 2 | RS3236-ADJ8YF5 | Package_TO_SOT_SMD:TSOT-23-5 | U6, U10 |
| 2 | TLV62569PDRLR | Package_TO_SOT_SMD:SOT-563 | U7, U8 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16 |
| 1 | 16K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12 |
| 1 | 240R | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 2uH | Inductor_SMD:L_7.3x7.3_H3.5 | L1 |
| 1 | 300K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | 30K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
| 1 | 37K5 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C100 |
| 1 | 77K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R21 |
| 1 | SIC402 | SIC402:SIC402 | U5 |
| 1 | TPS51200DRC | Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm | U9 |
| 1 | XC7A200T-3FBG484E | eec:Xilinx-XC7A200T-3FBG484E-0-0-MFG | U1 |
The 151 most common of 152 parts.
Questions
How big is the Pixieboard PCB?
It measures 50 × 50 mm and has 8 copper layers, 1.2 mm thick.
What parts does the Pixieboard use?
152 parts, built around the XC7A200T-3FBG484E, SIC402ACD, RS3236-ADJ8YF5 and TPS51200DRC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pixieboard KiCad files?
From the robotman2412/pixieboard repository on GitHub, at the commit this page was made from: the board is som/pixieboard.kicad_pcb and its schematic carrier-basic/carrier-basic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pixieboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask robotman2412 before reusing the design.
More from robotman2412/pixieboard
1Similar boards
- 6 layers91.8 × 139.8 mm
- 8 layers68 × 67.8 mm
Reform kintex
kitspace-forks/reform-kintex-som
This is the open hardware system-on-module featuring the Xilinx/AMD Kintex-7 FPGA (XC7K160T or XC7K325T) and 2GB DDR3 RAM.
297 parts2 - 4 layers100.6 × 97.3 mm
- 8 layers230 × 145.3 mm
OptiLogic-16-Pro
HexFud/OptiLogic-16-Pro
A logic analyzer with 16 channels that can also watch two fiber network links at the same time
342 parts - 6 layers44.4 × 58.1 mm
- 8 layers50 × 50 mm
- 8 layers38 × 38 mm
CMK230 Verified Import UNPLACED
oliverkirk-sudo/k230-c
This conditional checkpoint assigns six previously empty footprints. Its predecessor is published R8, commit f5181cb06de490fb23de0e79c619210a664b3212.
150 parts - 8 layers100 × 70 mm
Radio Project
thomas-montano/Radio_Puck
Small STM32 based ethernet connected radio puck capable of full duplex transmit and receive as well as dual RX or dual TX. Capable of rates up to 1 Mbps and completely configurable for many kinds of different modes.
154 parts