Skip to the content
11

TPS51200DRC

Texas Instruments

3.3V Sink/Source DDR Termination Regulator

Part id
ti/TPS51200DRC
Category
Uncategorised
Package
SON10
Pins
11
Used on
8 open-source boards

Overview

The TPS51200DRC is an uncategorised made by Texas Instruments in a SON10 package with 11 pins. 3.3V Sink/Source DDR Termination Regulator.

PCBKit's library has its KiCad symbol (Regulator_Linear:TPS51200DRC, from KiCad's library) and its footprint (Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm, from KiCad's library), ready for a KiCad board. 8 open-source boards in 7 repositories on GitHub use it.

Symbol

1REFIN2VLDOIN3VO5VOSNS6REFOUT7EN8GND9PGOOD10VIN
Regulator_Linear:TPS51200DRCFrom KiCad's library

Footprint

11
Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mmFrom KiCad's library

Pinout

11
The pins of the TPS51200DRC
PinNameType
1REFINInput
2VLDOINPower in
3VOPower out
4GNDPassive
5VOSNSInput
6REFOUTOutput
7ENInput
8GNDPower in
9PGOODOpen collector
10VINPower in
11GNDPassive

Open-source boards using it

8
  • 8 layers68 × 67.8 mmReform kintex, the printed circuit board in 3D

    Reform kintex

    kitspace-forks/reform-kintex-som

    This is the open hardware system-on-module featuring the Xilinx/AMD Kintex-7 FPGA (XC7K160T or XC7K325T) and 2GB DDR3 RAM.

    297 parts2
  • 4 layers100.6 × 97.3 mmEBAZ4205, the printed circuit board in 3D

    EBAZ4205

    chiro2001/EBAZ4205

    A 5$ Xilinx ZYNQ development board.

    586 parts1MIT
  • 8 layers230 × 145.3 mmOptiLogic-16-Pro, the printed circuit board in 3D

    OptiLogic-16-Pro

    HexFud/OptiLogic-16-Pro

    A logic analyzer with 16 channels that can also watch two fiber network links at the same time

    342 parts
  • 6 layers44.4 × 58.1 mmNf tpu, the printed circuit board in 3D

    Nf tpu

    nf-dj/netforce_tpu

    Building hardware to run transformer neural networks at low cost.

    153 parts
  • 8 layers50 × 50 mmPixieboard, the printed circuit board in 3D

    Pixieboard

    robotman2412/pixieboard

    152 parts
  • 8 layers50 × 50 mmZynq7010, the printed circuit board in 3D

    Zynq7010

    youheng7185/xc7z010-clg400_pcb

    152 parts
  • 6 layers44.4 × 58.1 mmNf tpu, the printed circuit board in 3D

    Nf tpu

    nf-dj/netforce_tpu

    Building hardware to run transformer neural networks at low cost.

    153 parts

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the TPS51200DRC?

Yes. The symbol is Regulator_Linear:TPS51200DRC and the footprint Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS51200DRC?

SON10, with 11 pins. Its footprint is drawn on this page.

What can replace the TPS51200DRC?

Parts like it in the library: the TPS51200DRCRG4 by Texas Instruments and the TPS74801DRC by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS51200DRC?

8 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.